From ray at dlink.ua Wed May 6 11:12:22 2009 From: ray at dlink.ua (Alexandr Rybalko) Date: Wed May 6 11:12:31 2009 Subject: BCM5354 D-Link DIR-320 Message-ID: <20090506141208.9ea79d6a.ray@dlink.ua> Good day to all! bfe driver ported as client of siba bus, it`s worked, but work not done. To dirty code :) Question to FreeBSD MIPS guru: Maybe problem in me low experience in FreeBSD internals, but I thing bus_dmamem_alloc and bus_dmamem_load ignore "alignment" attribute passed to bus_dma_tag_create. BFE need DMA descriptors page to be aligned to 4096, but I done this alignment only with set descriptors count from 128 to 512 Next question, how I can start init (without "write fault at 0x2003821"), if someone know boot -tftp -raw -addr=0x807963c0 -max=0x770000 192.168.0.90:kernel.tramp.bin cmd = boot -tftp -raw -addr=0x807963c0 -max=0x770000 192.168.0.90:kernel.tramp.bin Loader:raw Filesys:tftp Dev:eth0 File:192.168.0.90:kernel.tramp.bin Options:(null) Loading: entry point=807963C0 ...... 3773973 bytes read Entry at 0x807963c0 Closing network. Starting program at 0x807963c0 entry: mips_init() picache_stride = 4096 picache_loopcount = 4 pdcache_stride = 4096 pdcache_loopcount = 4 cpu0: Broadcom processor v41.144 MMU: Standard TLB, 32 entries L1 i-cache: 4 ways of 256 sets, 16 bytes per line L1 d-cache: 2 ways of 512 sets, 16 bytes per line Va=0xc0000000 Ve=ffffc000 init kernel_segmap va >> = 768 nkpt:120 avail_start:0x439000 avail_end:0x2000000 KDB: debugger backends: ddb KDB: current backend: ddb hz=100 cyl_per_hz:240000 cyl_per_usec:240 freq:240000000 cyl_per_hz:2400000 cyl_per_sec:240000000 Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #226 r105:114M: Wed May 6 13:00:54 EEST 2009 root@terran.mk.farlep.net:/usr/home/ray/Projects/MIPS/FreeBSD/obj/mips/usr/home/ray/Projects/MIPS/FreeBSD/src/sys/BCM4704 real memory = 32763904 (31996K bytes) Physical memory chunk(s): 0x00439000 - 0x01f44fff, 28360704 bytes (6924 pages) avail memory = 28008448 (26MB) null: nfslock: pseudo-device mem: nexus0: nexus_hinted_child: discovered hinted child siba0 at maddr 0x18000000 (65536) clock0: on nexus0 Establish HARD IRQ 5: filt 0x80239734 handler 0 arg 0 clock0: [FILTER] siba0: start 18000000 len 00010000 siba0: idlo = 600422dd siba0: idhi = 42439004 siba0: chipcore id = 00000800 siba0: ccid = 07025354, cc_id = 5354, cc_rev = 0002 siba0: 7 cores detected. siba0: after remapping: start 18000000 len 00007000 siba0: at mem 0x18000000-0x18006fff on nexus0 siba_attach: entry siba0: corid=0800 regions count 4 0=18000000x1000 1=1fc00000x400000 2=1c000000x2000000 3=1a000000x2000000 siba0: corid=0806 regions count 1 0=18001000x1000 siba0: corid=0816 regions count 1 0=18002000x1000 siba0: corid=0819 regions count=2 func=1 base 18003000x0200 func=2 base 18003800x0100 siba0: corid=080f regions count 4 0=18004000x1000 1=00000000x8000000 2=10000000x8000000 3=80000000x20000000 siba0: corid=0812 regions count 1 0=18005000x1000 siba0: corid=081c regions count 1 0=18006000x1000 siba_cc0: at mem 0x18000000-0x18000fff irq 0 on siba0 Establish HARD IRQ 0: filt 0 handler 0x802479b0 arg 0xc0815e80 siba_cc0: [GIANT-LOCKED] siba_cc0: [ITHREAD] bfe0: at mem 0x18001000-0x18001fff irq 1 on siba0 bfe_robo_config_vlan: Add port 1 untagged to VLAN=1 bfe_robo_config_vlan: Add port 2 untagged to VLAN=1 bfe_robo_config_vlan: Add port 3 untagged to VLAN=1 bfe_robo_config_vlan: Add port 4 untagged to VLAN=1 bfe_robo_config_vlan: Add port 5 untagged CPU MII to VLAN=1 bfe_robo_config_vlan: Add port 0 untagged to VLAN=2 bfe_robo_config_vlan: Add port 5 tagged CPU MII to VLAN=2 miibus0: on bfe0 bfeswitch0: PHY 0 on miibus0 bfeswitch0: 100baseTX-FDX bfe0: Ethernet address: 00:1b:11:31:df:0a Establish HARD IRQ 2: filt 0 handler 0x8024c21c arg 0xc0872000 bfe0: [MPSAFE] bfe0: [ITHREAD] siba_mips0: at mem 0x18002000-0x18002fff on siba0 ehci0: at mem 0x18003000-0x18003fff irq 4 on siba0 Establish HARD IRQ 4: filt 0 handler 0x802477b0 arg 0xc087b000 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus0: EHCI version 1.0 usbus0: on ehci0 siba_sdram0: at mem 0x18004000-0x18004fff on siba0 siba0: at device 5 (no driver attached) siba0: at device 6 (no driver attached) Device configuration finished. Timecounter "MIPS32" frequency 240000000 Hz quality 800 Timecounters tick every 10.000 msec usbus0: 480Mbps High Speed USB v2.0 bootpc_init: wired to interface 'bfe0' Sending DHCP Discover packet from interface bfe0 (00:1b:11:31:df:0a) ugen0.1: at usbus0 uhub0: on usbus0 Received DHCP Offer packet on bfe0 from 0.0.0.0 (accepted) (no root path) uhub0: 2 ports with 2 removable, self powered Sending DHCP Request packet from interface bfe0 (00:1b:11:31:df:0a) Received DHCP Ack packet on bfe0 from 0.0.0.0 (accepted) (got root path) bfe0 at 192.168.0.1 server 0.0.0.0 subnet mask 255.255.255.0 rootfs 192.168.0.90:/usr/home/ray/Projects/MIPS/FreeBSD/rootfs-mips Adjusted interface bfe0 Trying to mount root from nfs: NFS ROOT: 192.168.0.90:/usr/home/ray/Projects/MIPS/FreeBSD/rootfs-mips warning: no time-of-day clock registered, system time will not be set accurately warning: no time-of-day clock registered, system time will not be set accurately start_init: trying /sbin/init trap type 3 (TLB miss (store) - kernel mode) badaddr = 0x7fffefff, pc = 0x80243400, ra = 0x800bdc2c, sp = 0xc0659e00, sr = 0xff03, pid = 1, ASID = 0x2 trap type 3 (TLB miss (store) - kernel mode) badaddr = 0xc36f4000, pc = 0x80243060, ra = 0x80243208, sp = 0xc0659d60, sr = 0xff03, pid = 1, ASID = 0x2 trap type 3 (TLB miss (store) - kernel mode) badaddr = 0xc36b4000, pc = 0x80243060, ra = 0x80243208, sp = 0xc0659d60, sr = 0xff03, pid = 1, ASID = 0x2 trap type 3 (TLB miss (store) - kernel mode) badaddr = 0x10004000, pc = 0x802435c8, ra = 0x802432cc, sp = 0xc0659b28, sr = 0xff03, pid = 1, ASID = 0x2 trap type 3 (TLB miss (store) - kernel mode) badaddr = 0x7fffefe0, pc = 0x802435c8, ra = 0x802432cc, sp = 0xc0659bc8, sr = 0xff03, pid = 1, ASID = 0x2 trap type 3 (TLB miss (store) - kernel mode) badaddr = 0x7fffdfc4, pc = 0x802435c8, ra = 0x802432cc, sp = 0xc0659bc8, sr = 0xff03, pid = 1, ASID = 0x2 trap type 25 (address error (store) - user mode) badaddr = 0x2003821, pc = 0x4001b4, ra = 0, sp = 0x7fffded8, sr = 0x12, pid = 1, ASID = 0x2 ADDRESS_ERR: pid 1 (init), uid 0: pc 0x4001b8 got a write fault at 0x2003821 Trapframe Register Dump: zero: 00000000 at: 00000000 v0: 02003821 v1: 00000008 a0: 7fffdf04 a1: 00000000 a2: 00000000 a3: 00000000 t0: 00000000 t1: 00000000 t2: 00000000 t3: 00000000 t4: 00000000 t5: 00000000 t6: 00000000 t7: 00000000 t8: 00000000 t9: 00400178 s0: 00000002 s1: 7fffdf14 s2: 7fffdf08 s3: 00000000 s4: 00000000 s5: 00000000 s6: 00000000 s7: 00000000 k0: 00000000 k1: 00000000 gp: 1000ba70 sp: 7fffded8 s8: 00000000 ra: 00000000 sr: 00000012 mullo: 00000000 mulhi: 00000000 badvaddr: 02003821 cause: 80000014 pc: 004001b4 Page table info for pc address 0x4001b8: pde = 0x80502000, pte = 0x4002081a Dumping 4 words starting at pc address 0x4001b8: ac510000 8c840004 1080000e 00000000 trap type 25 (address error (store) - user mode) badaddr = 0x2003821, pc = 0x4001b4, ra = 0, sp = 0x7fffded8, sr = 0x13, pid = 1, ASID = 0x2 ADDRESS_ERR: pid 1 (init), uid 0: pc 0x4001b8 got a write fault at 0x2003821 Trapframe Register Dump: zero: 00000000 at: 00000000 v0: 02003821 v1: 00000008 a0: 7fffdf04 a1: 00000000 a2: 00000000 a3: 00000000 t0: 00000000 t1: 00000000 t2: 00000000 t3: 00000000 t4: 00000000 t5: 00000000 t6: 00000000 t7: 00000000 t8: 00000000 t9: 00400178 s0: 00000002 s1: 7fffdf14 s2: 7fffdf08 s3: 00000000 s4: 00000000 s5: 00000000 s6: 00000000 s7: 00000000 k0: 00000000 k1: 00000000 gp: 1000ba70 sp: 7fffded8 s8: 00000000 ra: 00000000 sr: 00000013 mullo: 00000000 mulhi: 00000000 badvaddr: 02003821 cause: 80008014 pc: 004001b4 Page table info for pc address 0x4001b8: pde = 0x80502000, pte = 0x4002081a Dumping 4 words starting at pc address 0x4001b8: ac510000 8c840004 1080000e 00000000 trap type 25 (address error (store) - user mode) badaddr = 0x2003821, pc = 0x4001b4, ra = 0, sp = 0x7fffded8, sr = 0x13, pid = 1, ASID = 0x2 ADDRESS_ERR: pid 1 (init), uid 0: pc 0x4001b8 got a write fault at 0x2003821 Trapframe Register Dump: zero: 00000000 at: 00000000 v0: 02003821 v1: 00000008 a0: 7fffdf04 a1: 00000000 a2: 00000000 a3: 00000000 t0: 00000000 t1: 00000000 t2: 00000000 t3: 00000000 t4: 00000000 t5: 00000000 t6: 00000000 t7: 00000000 t8: 00000000 t9: 00400178 s0: 00000002 s1: 7fffdf14 s2: 7fffdf08 s3: 00000000 s4: 00000000 s5: 00000000 s6: 00000000 s7: 00000000 k0: 00000000 k1: 00000000 gp: 1000ba70 sp: 7fffded8 s8: 00000000 ra: 00000000 sr: 00000013 mullo: 00000000 mulhi: 00000000 badvaddr: 02003821 cause: 80008014 pc: 004001b4 Page table info for pc address 0x4001b8: pde = 0x80502000, pte = 0x4002081a Dumping 4 words starting at pc address 0x4001b8: ac510000 8c840004 1080000e 00000000 trap type 25 (address error (store) - user mode) badaddr = 0x2003821, pc = 0x4001b4, ra = 0, sp = 0x7fffded8, sr = 0x13, pid = 1, ASID = 0x2 Trapframe Register Dump: zero: 00000000 at: 00000000 v0: 02003821 v1: 00000008 a0: 7fffdf04 a1: 00000000 a2: 00000000 a3: 00000000 t0: 00000000 t1: 00000000 t2: 00000000 t3: 00000000 t4: 00000000 t5: 00000000 t6: 00000000 t7: 00000000 t8: 00000000 t9: 00400178 s0: 00000002 s1: 7fffdf14 s2: 7fffdf08 s3: 00000000 s4: 00000000 s5: 00000000 s6: 00000000 s7: 00000000 k0: 00000000 k1: 00000000 gp: 1000ba70 sp: 7fffded8 s8: 00000000 ra: 00000000 sr: 00000013 mullo: 00000000 mulhi: 00000000 badvaddr: 02003821 cause: 80008014 pc: 004001b4 panic: too many faults at 0x2003821 KDB: enter: panic trap type 9 (breakpoint - kernel mode) badaddr = 0x2003821, pc = 0x8012ce30, ra = 0x8012ce28, sp = 0xc0659d80, sr = 0x3, pid = 1, ASID = 0x2 [thread pid 1 tid 100001 ] Stopped at kdb_enter+0x50: lui at,0x802e db> -- Alexandr Rybalko aka Alex RAY From gonzo at freebsd.org Thu May 7 18:57:44 2009 From: gonzo at freebsd.org (Oleksandr Tymoshenko) Date: Thu May 7 18:58:22 2009 Subject: BCM5354 D-Link DIR-320 In-Reply-To: <20090506141208.9ea79d6a.ray@dlink.ua> References: <20090506141208.9ea79d6a.ray@dlink.ua> Message-ID: <4A032821.1040800@freebsd.org> Alexandr Rybalko wrote: > Good day to all! > > bfe driver ported as client of siba bus, it`s worked, but work not done. > To dirty code :) > > Question to FreeBSD MIPS guru: > Maybe problem in me low experience in FreeBSD internals, but I thing bus_dmamem_alloc and bus_dmamem_load > ignore "alignment" attribute passed to bus_dma_tag_create. Yes, looks like it. I just skimmed the code and will confirm/test it a bit later. > > BFE need DMA descriptors page to be aligned to 4096, but I done this alignment only with set descriptors count from 128 to 512 > > Next question, how I can start init (without "write fault at 0x2003821"), if someone know > start_init: trying /sbin/init > trap type 3 (TLB miss (store) - kernel mode) > badaddr = 0x7fffefff, pc = 0x80243400, ra = 0x800bdc2c, sp = 0xc0659e00, sr = 0xff03, pid = 1, ASID = 0x2 > trap type 3 (TLB miss (store) - kernel mode) > badaddr = 0xc36f4000, pc = 0x80243060, ra = 0x80243208, sp = 0xc0659d60, sr = 0xff03, pid = 1, ASID = 0x2 > trap type 3 (TLB miss (store) - kernel mode) > badaddr = 0xc36b4000, pc = 0x80243060, ra = 0x80243208, sp = 0xc0659d60, sr = 0xff03, pid = 1, ASID = 0x2 > trap type 3 (TLB miss (store) - kernel mode) > badaddr = 0x10004000, pc = 0x802435c8, ra = 0x802432cc, sp = 0xc0659b28, sr = 0xff03, pid = 1, ASID = 0x2 > trap type 3 (TLB miss (store) - kernel mode) > badaddr = 0x7fffefe0, pc = 0x802435c8, ra = 0x802432cc, sp = 0xc0659bc8, sr = 0xff03, pid = 1, ASID = 0x2 > trap type 3 (TLB miss (store) - kernel mode) > badaddr = 0x7fffdfc4, pc = 0x802435c8, ra = 0x802432cc, sp = 0xc0659bc8, sr = 0xff03, pid = 1, ASID = 0x2 > trap type 25 (address error (store) - user mode) > badaddr = 0x2003821, pc = 0x4001b4, ra = 0, sp = 0x7fffded8, sr = 0x12, pid = 1, ASID = 0x2 .. skipped .. These faults should not happen. I think pmap internal data is messed in some way. So there is no simple answer, this problem requires more debugging From bms at incunabulum.net Sun May 10 03:01:18 2009 From: bms at incunabulum.net (Bruce Simpson) Date: Sun May 10 03:01:24 2009 Subject: BCM5354 D-Link DIR-320 In-Reply-To: <20090506141208.9ea79d6a.ray@dlink.ua> References: <20090506141208.9ea79d6a.ray@dlink.ua> Message-ID: <4A063EE8.70002@incunabulum.net> Alexandr Rybalko wrote: > Good day to all! > > bfe driver ported as client of siba bus, it`s worked, but work not done. > To dirty code :) > Wow. That is seriously cool. Thanks for picking that up and running with it, I only got so far. Any plans to push this code into Perforce or SVN? cheers, BMS From ray at dlink.ua Tue May 12 08:25:56 2009 From: ray at dlink.ua (Alexandr Rybalko) Date: Tue May 12 08:26:03 2009 Subject: BCM5354 D-Link DIR-320 In-Reply-To: <4A063EE8.70002@incunabulum.net> References: <20090506141208.9ea79d6a.ray@dlink.ua> <4A063EE8.70002@incunabulum.net> Message-ID: <20090512112530.860d837f.ray@dlink.ua> On Sun, 10 May 2009 03:41:44 +0100 Bruce Simpson wrote: >> Alexandr Rybalko wrote: >> > Good day to all! >> > >> > bfe driver ported as client of siba bus, it`s worked, but work not done. >> > To dirty code :) >> > >> >> Wow. That is seriously cool. Thanks for picking that up and running with >> it, I only got so far. >> >> Any plans to push this code into Perforce or SVN? Currently I`m working on other drivers for BCM5354, we need some basic drivers to work. As example we need correct Flash handling, because bfe core don`t have SPROM, so we need get value of PHY address, MAC address from NVRAM. And now code very dirty, I need to clean code. :) >> >> cheers, >> BMS -- ??????? ????????? ??????????? D-Link ??????? From ray at dlink.ua Tue May 12 08:54:48 2009 From: ray at dlink.ua (Alexandr Rybalko) Date: Tue May 12 08:54:55 2009 Subject: BCM5354 D-Link DIR-320 In-Reply-To: <4A032821.1040800@freebsd.org> References: <20090506141208.9ea79d6a.ray@dlink.ua> <4A032821.1040800@freebsd.org> Message-ID: <20090512115413.a9a94d87.ray@dlink.ua> On Thu, 07 May 2009 11:27:45 -0700 Oleksandr Tymoshenko wrote: >> Alexandr Rybalko wrote: >> > Good day to all! >> > >> > bfe driver ported as client of siba bus, it`s worked, but work not done. >> > To dirty code :) >> > >> > Question to FreeBSD MIPS guru: >> > Maybe problem in me low experience in FreeBSD internals, but I thing bus_dmamem_alloc and bus_dmamem_load >> > ignore "alignment" attribute passed to bus_dma_tag_create. >> Yes, looks like it. I just skimmed the code and will confirm/test >> it a bit later. >> >> > >> > BFE need DMA descriptors page to be aligned to 4096, but I done this alignment only with set descriptors count from 128 to >> > 512 >> >> > >> > Next question, how I can start init (without "write fault at 0x2003821"), if someone know >> > start_init: trying /sbin/init >> > trap type 3 (TLB miss (store) - kernel mode) >> > badaddr = 0x7fffefff, pc = 0x80243400, ra = 0x800bdc2c, sp = 0xc0659e00, sr = 0xff03, pid = 1, ASID = 0x2 >> > trap type 3 (TLB miss (store) - kernel mode) >> > badaddr = 0xc36f4000, pc = 0x80243060, ra = 0x80243208, sp = 0xc0659d60, sr = 0xff03, pid = 1, ASID = 0x2 >> > trap type 3 (TLB miss (store) - kernel mode) >> > badaddr = 0xc36b4000, pc = 0x80243060, ra = 0x80243208, sp = 0xc0659d60, sr = 0xff03, pid = 1, ASID = 0x2 >> > trap type 3 (TLB miss (store) - kernel mode) >> > badaddr = 0x10004000, pc = 0x802435c8, ra = 0x802432cc, sp = 0xc0659b28, sr = 0xff03, pid = 1, ASID = 0x2 >> > trap type 3 (TLB miss (store) - kernel mode) >> > badaddr = 0x7fffefe0, pc = 0x802435c8, ra = 0x802432cc, sp = 0xc0659bc8, sr = 0xff03, pid = 1, ASID = 0x2 >> > trap type 3 (TLB miss (store) - kernel mode) >> > badaddr = 0x7fffdfc4, pc = 0x802435c8, ra = 0x802432cc, sp = 0xc0659bc8, sr = 0xff03, pid = 1, ASID = 0x2 >> > trap type 25 (address error (store) - user mode) >> > badaddr = 0x2003821, pc = 0x4001b4, ra = 0, sp = 0x7fffded8, sr = 0x12, pid = 1, ASID = 0x2 >> .. skipped .. >> These faults should not happen. I think pmap internal data is messed >> in some way. So there is no simple answer, this problem requires more >> debugging >> Maybe it so, because I have wrong value in "gp" register? Every function start with: lui gp,0xfc1 But ldscript.mips, ldscript.mips.cfe say "_gp = ALIGN(16) + 0x7ff0;" badvaddr: 02003821 pc: 004001b4 Dumping 4 words starting at pc address 0x4001b8: ac510000 8c840004 1080000e 00000000 4001b0: 8f828aa4 lw v0,-30044(gp) 4001b4: 1a000011 blez s0,4001fc <__start+0x84> 4001b8: ac510000 sw s1,0(v0) 4001bc: 8c840004 lw a0,4(a0) 4001c0: 1080000e beqz a0,4001fc <__start+0x84> 4001c4: 00000000 nop -- ??????? ????????? ??????????? D-Link ??????? From tinderbox at freebsd.org Wed May 13 08:09:30 2009 From: tinderbox at freebsd.org (FreeBSD Tinderbox) Date: Wed May 13 08:09:48 2009 Subject: [head tinderbox] failure on mips/mips Message-ID: <20090513080926.175F37302F@freebsd-current.sentex.ca> TB --- 2009-05-13 07:04:55 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2009-05-13 07:04:55 - starting HEAD tinderbox run for mips/mips TB --- 2009-05-13 07:04:55 - cleaning the object tree TB --- 2009-05-13 07:05:48 - cvsupping the source tree TB --- 2009-05-13 07:05:48 - /usr/bin/csup -z -r 3 -g -L 1 -h localhost -s /tinderbox/HEAD/mips/mips/supfile TB --- 2009-05-13 07:05:56 - building world TB --- 2009-05-13 07:05:56 - MAKEOBJDIRPREFIX=/obj TB --- 2009-05-13 07:05:56 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2009-05-13 07:05:56 - TARGET=mips TB --- 2009-05-13 07:05:56 - TARGET_ARCH=mips TB --- 2009-05-13 07:05:56 - TZ=UTC TB --- 2009-05-13 07:05:56 - __MAKE_CONF=/dev/null TB --- 2009-05-13 07:05:56 - cd /src TB --- 2009-05-13 07:05:56 - /usr/bin/make -B buildworld >>> World build started on Wed May 13 07:05:59 UTC 2009 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything [...] In file included from ioctl.c:101: /obj/mips/src/tmp/usr/include/sys/ioctl_compat.h:117:1: warning: "MDMBUF" redefined In file included from /obj/mips/src/tmp/usr/include/sys/tty.h:41, from ioctl.c:9: /obj/mips/src/tmp/usr/include/sys/termios.h:148:1: warning: this is the location of the previous definition cc -O -pipe -EL -msoft-float -G0 -mno-dsp -mabicalls -I/src/usr.bin/truss -I. -std=gnu99 -Wsystem-headers -Wall -Wno-format-y2k -W -Wno-unused-parameter -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Wreturn-type -Wcast-qual -Wwrite-strings -Wswitch -Wshadow -Wcast-align -Wunused-parameter -Wchar-subscripts -Winline -Wnested-externs -Wredundant-decls -Wno-pointer-sign -c /src/usr.bin/truss/mips-fbsd.c /src/usr.bin/truss/mips-fbsd.c: In function 'mips_syscall_exit': /src/usr.bin/truss/mips-fbsd.c:341: error: too few arguments to function 'print_syscall_ret' *** Error code 1 Stop in /src/usr.bin/truss. *** Error code 1 Stop in /src/usr.bin. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2009-05-13 08:09:25 - WARNING: /usr/bin/make returned exit code 1 TB --- 2009-05-13 08:09:25 - ERROR: failed to build world TB --- 2009-05-13 08:09:25 - 2841.80 user 324.30 system 3870.22 real http://tinderbox.des.no/tinderbox-head-HEAD-mips-mips.full From dds at aueb.gr Wed May 13 13:04:17 2009 From: dds at aueb.gr (Diomidis Spinellis) Date: Wed May 13 13:04:35 2009 Subject: [head tinderbox] failure on mips/mips In-Reply-To: <20090513080926.175F37302F@freebsd-current.sentex.ca> References: <20090513080926.175F37302F@freebsd-current.sentex.ca> Message-ID: <4A0AC23E.2060005@aueb.gr> FreeBSD Tinderbox wrote: > TB --- 2009-05-13 07:04:55 - tinderbox 2.6 running on freebsd-current.sentex.ca > TB --- 2009-05-13 07:04:55 - starting HEAD tinderbox run for mips/mips > TB --- 2009-05-13 07:04:55 - cleaning the object tree > TB --- 2009-05-13 07:05:48 - cvsupping the source tree > TB --- 2009-05-13 07:05:48 - /usr/bin/csup -z -r 3 -g -L 1 -h localhost -s /tinderbox/HEAD/mips/mips/supfile > TB --- 2009-05-13 07:05:56 - building world > TB --- 2009-05-13 07:05:56 - MAKEOBJDIRPREFIX=/obj > TB --- 2009-05-13 07:05:56 - PATH=/usr/bin:/usr/sbin:/bin:/sbin > TB --- 2009-05-13 07:05:56 - TARGET=mips > TB --- 2009-05-13 07:05:56 - TARGET_ARCH=mips > TB --- 2009-05-13 07:05:56 - TZ=UTC > TB --- 2009-05-13 07:05:56 - __MAKE_CONF=/dev/null > TB --- 2009-05-13 07:05:56 - cd /src > TB --- 2009-05-13 07:05:56 - /usr/bin/make -B buildworld >>>> World build started on Wed May 13 07:05:59 UTC 2009 >>>> Rebuilding the temporary build tree >>>> stage 1.1: legacy release compatibility shims >>>> stage 1.2: bootstrap tools >>>> stage 2.1: cleaning up the object tree >>>> stage 2.2: rebuilding the object tree >>>> stage 2.3: build tools >>>> stage 3: cross tools >>>> stage 4.1: building includes >>>> stage 4.2: building libraries >>>> stage 4.3: make dependencies >>>> stage 4.4: building everything > [...] > cc -O -pipe -EL -msoft-float -G0 -mno-dsp -mabicalls -I/src/usr.bin/truss -I. -std=gnu99 -Wsystem-headers -Wall -Wno-format-y2k -W -Wno-unused-parameter -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Wreturn-type -Wcast-qual -Wwrite-strings -Wswitch -Wshadow -Wcast-align -Wunused-parameter -Wchar-subscripts -Winline -Wnested-externs -Wredundant-decls -Wno-pointer-sign -c /src/usr.bin/truss/mips-fbsd.c > /src/usr.bin/truss/mips-fbsd.c: In function 'mips_syscall_exit': > /src/usr.bin/truss/mips-fbsd.c:341: error: too few arguments to function 'print_syscall_ret' > *** Error code 1 > > Stop in /src/usr.bin/truss. > *** Error code 1 > > Stop in /src/usr.bin. > *** Error code 1 > > Stop in /src. > *** Error code 1 > > Stop in /src. > *** Error code 1 Sorry, I missed syncing the code I wrote in January with the MIPS support introduced in February. I fixed it in r192040. Diomidis Spinellis From mike.gordon at primus.ca Sun May 17 14:32:41 2009 From: mike.gordon at primus.ca (mike gordon) Date: Sun May 17 14:33:14 2009 Subject: Technology - Oracle, IBM, ERP - SAP, QAD, CRM - Siebel, Communication - Cisco, Manufacturing, Healthcare customer lists Message-ID: <200905171331.n4HDUv4f025609@matrix.start.ca> This email is to introduce our company Repharm and services we offer. Repharm is an international leader of sales and marketing database products for high technology businesses. We provide installed customer lists for companies such as Oracle, PeopleSoft, Siebel, etc. Our lists are continuously maintained to ensure the highest level of accuracy and completeness. We have hundreds of industry leaders as customers today - many whose names you would recognize. If you are interested, we could send you a sample of one of our lists complete with summary information, so that you could evaluate our content. To find out about the various lists we have available, in preparation for any sales or marketing campaigns that your organization may be considering in future, we'd love to hear from you. Or, perhaps you'd be interested in acquiring your competitors' customer lists? If you would like more information, please contact us at (905) 721-8456 or email us at repharm1@aol.com Below are just some of the lists available: ERP (ENTERPRISE RESOURCE PLANNING): Baan JD Edwards Lawson Made2Manage Mapics Marcam Oracle Peoplesoft SAP SSA E-BUSINESS APPLICATIONS: Ariba BMC BroadVision Commerce One Webtrends MIDDLEWARE/CONNECTIVITY/APP SERVERS/WEB SERVERS: Bea Systems Iona Unisys OPERATING SYSTEMS/HARDWARE/SOFTWARE: COMPAQ HP 3000 HP 9000 HP-UX IBM AS/400 IBM OS/390 Lotus Notes Microsoft Sun Microsystems DATABASE: DB2 FileMaker Informix Oracle SQL SybaseCRM (CUSTOMER RELATIONSHIP MANAGEMENT): Clarify E.piphany HNC Onyx Pivotal Siebel Vantive Xchange SUPPLY CHAIN: Agile i2 Technologies Manugistics QAD Webplan COMMUNICATIONS: Nortel Cisco 3com Siemens Alcatel Telecom Vars ASP?s CLECS ISP?s E-COMMERCE: Dot Com Directory Consultant Directory Software Directory EXECUTIVE DIRECTORIES: Chief Executive Officer Chief Financial Officer Chief Information Officer Engineering Human Resources Purchasing Sales/Marketing INDUSTRY SPECIFIC LISTS: Agriculture, Forestry and Fishing, Communications, Construction, Finance, Insurance and Real Estate, Manufacturing, Mining, Public Administration, Retail Trade, Services, Transportation, Utilities, Wholesale Trade From tinderbox at freebsd.org Thu May 28 20:02:30 2009 From: tinderbox at freebsd.org (FreeBSD Tinderbox) Date: Thu May 28 20:02:43 2009 Subject: [head tinderbox] failure on mips/mips Message-ID: <20090528200226.005657302F@freebsd-current.sentex.ca> TB --- 2009-05-28 19:27:59 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2009-05-28 19:27:59 - starting HEAD tinderbox run for mips/mips TB --- 2009-05-28 19:27:59 - cleaning the object tree TB --- 2009-05-28 19:28:20 - cvsupping the source tree TB --- 2009-05-28 19:28:20 - /usr/bin/csup -z -r 3 -g -L 1 -h localhost -s /tinderbox/HEAD/mips/mips/supfile TB --- 2009-05-28 19:28:34 - building world TB --- 2009-05-28 19:28:34 - MAKEOBJDIRPREFIX=/obj TB --- 2009-05-28 19:28:34 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2009-05-28 19:28:34 - TARGET=mips TB --- 2009-05-28 19:28:34 - TARGET_ARCH=mips TB --- 2009-05-28 19:28:34 - TZ=UTC TB --- 2009-05-28 19:28:34 - __MAKE_CONF=/dev/null TB --- 2009-05-28 19:28:34 - cd /src TB --- 2009-05-28 19:28:34 - /usr/bin/make -B buildworld >>> World build started on Thu May 28 19:28:37 UTC 2009 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries [...] building static ugidfw library ranlib libugidfw.a cc -fpic -DPIC -O -pipe -EL -msoft-float -G0 -mno-dsp -mabicalls -std=gnu99 -c /src/lib/libugidfw/ugidfw.c -o ugidfw.So building shared library libugidfw.so.3 ===> lib/libusbhid (all) cc -O -pipe -EL -msoft-float -G0 -mno-dsp -mabicalls -std=gnu99 -c /src/lib/libusbhid/descr.c /src/lib/libusbhid/descr.c: In function 'hid_get_report_desc': /src/lib/libusbhid/descr.c:79: error: storage size of 'ugd' isn't known *** Error code 1 Stop in /src/lib/libusbhid. *** Error code 1 Stop in /src/lib. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2009-05-28 20:02:25 - WARNING: /usr/bin/make returned exit code 1 TB --- 2009-05-28 20:02:25 - ERROR: failed to build world TB --- 2009-05-28 20:02:25 - 1565.12 user 187.64 system 2066.84 real http://tinderbox.des.no/tinderbox-head-HEAD-mips-mips.full From tinderbox at freebsd.org Sun May 31 14:07:44 2009 From: tinderbox at freebsd.org (FreeBSD Tinderbox) Date: Sun May 31 14:08:01 2009 Subject: [head tinderbox] failure on mips/mips Message-ID: <20090531140740.73B657302F@freebsd-current.sentex.ca> TB --- 2009-05-31 13:06:38 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2009-05-31 13:06:38 - starting HEAD tinderbox run for mips/mips TB --- 2009-05-31 13:06:38 - cleaning the object tree TB --- 2009-05-31 13:07:07 - cvsupping the source tree TB --- 2009-05-31 13:07:07 - /usr/bin/csup -z -r 3 -g -L 1 -h localhost -s /tinderbox/HEAD/mips/mips/supfile TB --- 2009-05-31 13:07:28 - building world TB --- 2009-05-31 13:07:28 - MAKEOBJDIRPREFIX=/obj TB --- 2009-05-31 13:07:28 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2009-05-31 13:07:28 - TARGET=mips TB --- 2009-05-31 13:07:28 - TARGET_ARCH=mips TB --- 2009-05-31 13:07:28 - TZ=UTC TB --- 2009-05-31 13:07:28 - __MAKE_CONF=/dev/null TB --- 2009-05-31 13:07:28 - cd /src TB --- 2009-05-31 13:07:28 - /usr/bin/make -B buildworld >>> World build started on Sun May 31 13:07:29 UTC 2009 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything [...] gzip -cn /src/usr.bin/jot/jot.1 > jot.1.gz ===> usr.bin/kdump (all) cc -O -pipe -EL -msoft-float -G0 -mno-dsp -mabicalls -I/src/usr.bin/kdump/../ktrace -I/src/usr.bin/kdump -I/src/usr.bin/kdump/../.. -std=gnu99 -c /src/usr.bin/kdump/kdump.c cc -O -pipe -EL -msoft-float -G0 -mno-dsp -mabicalls -I/src/usr.bin/kdump/../ktrace -I/src/usr.bin/kdump -I/src/usr.bin/kdump/../.. -std=gnu99 -c ioctl.c ioctl.c: In function 'ioctlname': ioctl.c:153: error: invalid application of 'sizeof' to incomplete type 'struct vi_req' ioctl.c:187: error: invalid application of 'sizeof' to incomplete type 'struct vi_req' ioctl.c:2609: error: invalid application of 'sizeof' to incomplete type 'struct vi_req' *** Error code 1 Stop in /src/usr.bin/kdump. *** Error code 1 Stop in /src/usr.bin. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2009-05-31 14:07:40 - WARNING: /usr/bin/make returned exit code 1 TB --- 2009-05-31 14:07:40 - ERROR: failed to build world TB --- 2009-05-31 14:07:40 - 2780.90 user 325.90 system 3661.38 real http://tinderbox.des.no/tinderbox-head-HEAD-mips-mips.full