From scrappy at hub.org Mon Sep 1 18:27:30 2008 From: scrappy at hub.org (Marc G. Fournier) Date: Mon Sep 1 18:27:38 2008 Subject: cPanel or Plesk in jail ... ? Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Simple enough, has anyone been able to get either to run successfully in a jail? - -- Marc G. Fournier Hub.Org Hosting Solutions S.A. (http://www.hub.org) Email . scrappy@hub.org MSN . scrappy@hub.org Yahoo . yscrappy Skype: hub.org ICQ . 7615664 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (FreeBSD) iEYEARECAAYFAki8L/8ACgkQ4QvfyHIvDvO5lACg7UEk8CkUvD4DIu2LI/bVs+65 E5YAn0BmZHgRoqg76S5lzRa+nK2uZoIu =sZXQ -----END PGP SIGNATURE----- From freebsd at hub.org Mon Sep 1 18:32:30 2008 From: freebsd at hub.org (Marc G. Fournier) Date: Mon Sep 1 18:32:37 2008 Subject: [freebsd-isp] Re: BW measuring Tool In-Reply-To: <4819FD45.5070501@neuropunks.org> References: <4819D23D.90700@ibctech.ca> <200805011501.m41F1uc3084445@himinbjorg.tucs-beachin-obx-house.com> <126f8c310805011017y48bf0473h9a6653d2a32bae72@mail.gmail.com> <4819FD45.5070501@neuropunks.org> Message-ID: <96D914334BEFF82DD489C912@ganymede.hub.org> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Better late then never, but I've been using: - --On Thursday, May 01, 2008 13:26:29 -0400 Max Gribov wrote: > if you dont mind paying, www.ookla.com > > > Enrique Llanos V. wrote: >> Exactly, i may have expressed incorrectly, im looking for some test like the >> one Tuc mentions, only being US the server and our customers the clients, >> any suggestions? >> >> >> >> On Thu, May 1, 2008 at 10:01 AM, Tuc at T-B-O-H.NET wrote: >> >> >>>> Enrique Llanos V. wrote: >>>> >>>>> Dear Sirs, i was looking in the ports for a tool that allow our >>>>> >>> customers >>> >>>>> to measure their bandwidth against that server, and couldn't find >>>>> >>> anything >>> >>>>> related, I'd very much appreciate if anyone here can provide me some >>>>> pointers where to look for. >>>>> >>>> Is /usr/ports/net-mgmt/mrtg what you are after? >>>> >>>> I may not completely understand the question, so you might want to check >>>> to see if it's what you need: >>>> >>>> http://oss.oetiker.ch/mrtg/ >>>> >>>> >>> I think the OP might be talking about those speedtest things that >>> people run, like : >>> >>> http://www.dslreports.com/stest >>> >>> Tuc >>> >>> >> >> >> >> > > _______________________________________________ > freebsd-isp@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-isp > To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" - -- Marc G. Fournier Hub.Org Hosting Solutions S.A. (http://www.hub.org) Email . scrappy@hub.org MSN . scrappy@hub.org Yahoo . yscrappy Skype: hub.org ICQ . 7615664 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (FreeBSD) iEYEARECAAYFAki8MP4ACgkQ4QvfyHIvDvOXpwCg3TT7nJyZhlhTJkwnaWqTt3D7 GLwAn3xaNVZm43rrCZlYeZgVknF9UsJI =FhCj -----END PGP SIGNATURE----- From freebsd at hub.org Tue Sep 2 01:06:03 2008 From: freebsd at hub.org (Marc G. Fournier) Date: Tue Sep 2 01:06:11 2008 Subject: cPanel in a jail ... seems to work ... Message-ID: <681FC7B8A3FE76F9056F4B54@ganymede.hub.org> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Everything appears to have installed fine, I can login, create accounts, etc ... all in all, I'm impressed ... but, I seem to have one process 'running wild': # ps aux | grep stunnel root 93708 92.2 0.0 12780 3500 ?? RJ 12:18AM 40:34.35 /usr/local/bin/stunnel /tmp/stunnel_test.conf root 93704 0.0 0.0 12780 3416 ?? IJ 12:18AM 0:00.00 /usr/local/bin/stunnel /tmp/stunnel_test.conf root 93705 0.0 0.0 12780 3308 ?? IJ 12:18AM 0:00.00 /usr/local/bin/stunnel /tmp/stunnel_test.conf root 93706 0.0 0.0 12780 3308 ?? IJ 12:18AM 0:00.00 /usr/local/bin/stunnel /tmp/stunnel_test.conf root 93707 0.0 0.0 12780 3308 ?? IJ 12:18AM 0:00.00 /usr/local/bin/stunnel /tmp/stunnel_test.conf root 3802 0.0 0.0 456 372 p6 D+J 1:02AM 0:00.00 grep stunnel 92.2% of the CPU? Wow ... Does anyone know what this is for, and why its using so much CPU? - -- Marc G. Fournier Hub.Org Hosting Solutions S.A. (http://www.hub.org) Email . scrappy@hub.org MSN . scrappy@hub.org Yahoo . yscrappy Skype: hub.org ICQ . 7615664 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (FreeBSD) iEYEARECAAYFAki8kXUACgkQ4QvfyHIvDvM6OACg0mLx5etJdLjOvh+x6qThZlPJ 0EsAn0h+mqvxGHzCLdhr2OEHQTA1XSuA =70sT -----END PGP SIGNATURE----- From stas at FreeBSD.org Tue Sep 2 12:14:46 2008 From: stas at FreeBSD.org (Stanislav Sedov) Date: Tue Sep 2 12:15:22 2008 Subject: cPanel in a jail ... seems to work ... In-Reply-To: <681FC7B8A3FE76F9056F4B54@ganymede.hub.org> References: <681FC7B8A3FE76F9056F4B54@ganymede.hub.org> Message-ID: <20080902153719.2148127c.stas@FreeBSD.org> On Mon, 01 Sep 2008 22:05:57 -0300 "Marc G. Fournier" mentioned: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Everything appears to have installed fine, I can login, create accounts, etc > ... all in all, I'm impressed ... but, I seem to have one process 'running > wild': > > > # ps aux | grep stunnel > root 93708 92.2 0.0 12780 3500 ?? RJ 12:18AM 40:34.35 > /usr/local/bin/stunnel /tmp/stunnel_test.conf > root 93704 0.0 0.0 12780 3416 ?? IJ 12:18AM 0:00.00 > /usr/local/bin/stunnel /tmp/stunnel_test.conf > root 93705 0.0 0.0 12780 3308 ?? IJ 12:18AM 0:00.00 > /usr/local/bin/stunnel /tmp/stunnel_test.conf > root 93706 0.0 0.0 12780 3308 ?? IJ 12:18AM 0:00.00 > /usr/local/bin/stunnel /tmp/stunnel_test.conf > root 93707 0.0 0.0 12780 3308 ?? IJ 12:18AM 0:00.00 > /usr/local/bin/stunnel /tmp/stunnel_test.conf > root 3802 0.0 0.0 456 372 p6 D+J 1:02AM 0:00.00 grep stunnel > > 92.2% of the CPU? Wow ... > > Does anyone know what this is for, and why its using so much CPU? > What does truss say? -- Stanislav Sedov ST4096-RIPE -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 195 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-isp/attachments/20080902/914e612a/attachment.pgp From tony at crosswinds.net Tue Sep 2 19:11:00 2008 From: tony at crosswinds.net (Tony Holmes) Date: Tue Sep 2 19:11:08 2008 Subject: B/W Monitoring with IPFW Message-ID: <20080902185102.GA7176@crosswinds.net> I have simply gotten buried in the many options for monitoring and graphing b/w data and just need a pointer from experienced people at solutions. I have a dedicated FreeBSD 4.10 (yeah it's old) firewall with IPFW and the appropriate counter rules installed. Each counter rule has an in and out rule for the boxes (contained in a Class-C block) that I wish to monitor. I have a dedicated monitoring box for presenting of data. Collecting every 5 mins will be the standard. I wish to have a delve-down of the following: Level 1: Summary of all traffic in/out Level 2: Summary of host in/out - these will be grouped by IP/function I use dedicated server/jails for functions (http on one, ftp one another, etc) Level 3: Detail of each individual IP I've gotten lost in the options - mrtg, rrdtool, cacti... using custom script, snmpd... the list goes on. In all my years I've never done this part myself and now I find I need to. So a pointer to a how to, recommended software, anything to help sort my out and clear the confusion would be very much appreciated. TIA! -- Tony Holmes Ph: (416) 993-1219 Founder and Senior Systems Architect Crosswinds Internet Communications Inc. From howie at thingy.com Wed Sep 3 00:39:01 2008 From: howie at thingy.com (Howard Jones) Date: Wed Sep 3 00:39:08 2008 Subject: [freebsd-isp] B/W Monitoring with IPFW In-Reply-To: <20080902185102.GA7176@crosswinds.net> References: <20080902185102.GA7176@crosswinds.net> Message-ID: <48BDD65E.4040902@thingy.com> Tony Holmes wrote: > I have simply gotten buried in the many options for monitoring and > graphing b/w data and just need a pointer from experienced people > at solutions. > > I have a dedicated FreeBSD 4.10 (yeah it's old) firewall with IPFW > and the appropriate counter rules installed. Each counter rule has > an in and out rule for the boxes (contained in a Class-C block) that > I wish to monitor. > > I have a dedicated monitoring box for presenting of data. Collecting > every 5 mins will be the standard. > > I wish to have a delve-down of the following: > > Level 1: Summary of all traffic in/out > Level 2: Summary of host in/out - these will be grouped by IP/function > I use dedicated server/jails for functions (http on one, ftp one > another, etc) > Level 3: Detail of each individual IP > > I've gotten lost in the options - mrtg, rrdtool, cacti... using custom script, > snmpd... the list goes on. In all my years I've never done this part myself and > now I find I need to. > Extending net-snmp to do this, and then using anything that can read/graph/report SNMP (cacti, mrtg, cricket etc) is pretty straightforward. If you can make a simple shell script to get the value you want (e.g. ipfw show 400 | cut -f3 -d' ') then this works OK as a starting point. I have a similar example on my site: http://wotsit.thingy.com/haj/cacti/cacti-dynfirewall.html (and a few more on there). You might also want to look at ng_netflow or ntop - can't remember if netgraph/ng_* was in 4.10 though. To get down to per-IP without having a huge number of ipfw count rules, these two might fit better. Howie From tony at crosswinds.net Wed Sep 3 17:24:10 2008 From: tony at crosswinds.net (Tony Holmes) Date: Wed Sep 3 17:24:32 2008 Subject: SNMP On FreeBSD 4.10 Message-ID: <20080903172409.GB14969@crosswinds.net> I am attempting to configure snmpd on 4.10 for monitoring bandwidth in/out via ipfw counters. Took a while to find all the old packages for 4.10 but it's installed and now dying on the configure step: cw-fw# snmpconf -g basic_setup Not enough arguments for mkdir at /usr/local/bin/snmpconf line 174, near ""$ENV{HOME}/.snmp")" Execution of /usr/local/bin/snmpconf aborted due to compilation errors. cw-fw# snmpconf Not enough arguments for mkdir at /usr/local/bin/snmpconf line 174, near ""$ENV{HOME}/.snmp")" Execution of /usr/local/bin/snmpconf aborted due to compilation errors. Googling has turned up people asking the same question and no answers. This is new to me and I am currently stumped. I installed the net-snmpd with the following options: make WITH_INETADDRESS_HACK=yes WITHOUT_IPV6=yes NET_SNMP_SYS_CONTACT="[SNIP]" NET_SNMP_SYS_LOCATION="[SNIP]" install Went well with no errors. Help? -- Tony Holmes Ph: (416) 993-1219 Founder and Senior Systems Architect Crosswinds Internet Communications Inc. From tony at crosswinds.net Wed Sep 3 18:21:08 2008 From: tony at crosswinds.net (Tony Holmes) Date: Wed Sep 3 18:21:15 2008 Subject: [freebsd-isp] B/W Monitoring with IPFW In-Reply-To: <48BDD65E.4040902@thingy.com> References: <20080902185102.GA7176@crosswinds.net> <48BDD65E.4040902@thingy.com> Message-ID: <20080903182107.GA15490@crosswinds.net> > Extending net-snmp to do this, and then using anything that can > read/graph/report SNMP (cacti, mrtg, cricket etc) is pretty > straightforward. If you can make a simple shell script to get the value I can't even get net-snmpd installed and configured correctly :) Googling is not turning up any nice how to's and nice explanations of the myriad features of snmpd and snmpdtrap... so frustrating :/ -- Tony Holmes Ph: (416) 993-1219 Founder and Senior Systems Architect Crosswinds Internet Communications Inc. From tony at crosswinds.net Wed Sep 3 19:01:26 2008 From: tony at crosswinds.net (Tony Holmes) Date: Wed Sep 3 19:01:32 2008 Subject: SNMP On FreeBSD 4.10 In-Reply-To: <20080903172409.GB14969@crosswinds.net> References: <20080903172409.GB14969@crosswinds.net> Message-ID: <20080903190125.GC15696@crosswinds.net> > I am attempting to configure snmpd on 4.10 for monitoring bandwidth > in/out via ipfw counters. > > Took a while to find all the old packages for 4.10 but it's installed > and now dying on the configure step: > > cw-fw# snmpconf -g basic_setup > Not enough arguments for mkdir at /usr/local/bin/snmpconf line 174, near ""$ENV{HOME}/.snmp")" > Execution of /usr/local/bin/snmpconf aborted due to compilation errors. > cw-fw# snmpconf > Not enough arguments for mkdir at /usr/local/bin/snmpconf line 174, near ""$ENV{HOME}/.snmp")" > Execution of /usr/local/bin/snmpconf aborted due to compilation errors. > > > Googling has turned up people asking the same question and no answers. > This is new to me and I am currently stumped. > > I installed the net-snmpd with the following options: > > make WITH_INETADDRESS_HACK=yes WITHOUT_IPV6=yes NET_SNMP_SYS_CONTACT="[SNIP]" > NET_SNMP_SYS_LOCATION="[SNIP]" install > > Went well with no errors. > > Help? Commenting out the option I know I wasn't needed solved the problem. Then I gave up on snmpdconf - too many options! Broke my brain. I found a lovely little "basic" configuration in an email reply to another issue. Now the true debugging begins -- Tony Holmes Ph: (416) 993-1219 Founder and Senior Systems Architect Crosswinds Internet Communications Inc. From tony at crosswinds.net Thu Sep 4 00:48:38 2008 From: tony at crosswinds.net (Tony Holmes) Date: Thu Sep 4 00:48:44 2008 Subject: SNMP - Hair Pulling Error :) Message-ID: <20080904004837.GA22814@crosswinds.net> After a slow start and a couple private conversations (THANKS!) I have gotten net-snmpd compiled, configured, running. I ran into an error and went to the simplest config I could and still get the "No Such Instance currently exists at this OID" error. Details: FreeBSD 4.10 cannot upgrade net-snmp-5.1.1_1 yes, old ipfw with counter rules installed 100 - 520ish /usr/local/etc/snmp/snmp.conf: rocommunity public syslocation here syscontact me pass .1.3.6.1.4.1.3027.1 /root/bytecount 100 .1.3.6.1.4.1.3027.1 /root/bytecount: #!/bin/sh echo "$2" echo "integer" /bin/expr `ipfw -a list $1 | /usr/bin/awk '{ print $3 }'` % 4294967295 Run bytecount test (pulled from snmp debug): # /root/bytecount 100 .1.3.6.1.4.1.3027.1 -g .1.3.6.1.4.1.3027.1 .1.3.6.1.4.1.3027.1 counter 7151484 Run the snmpget: # snmpget -v 2c -c public localhost .1.3.6.1.4.1.3027.1 SNMPv2-SMI::enterprises.3027.1 = No Such Instance currently exists at this OID The net-snmp shows the call being made. According to the docs I have the format right for the output of /root/bytecount. Googling lead me to this simple config and still I get the error and now sit stumped. Leads? Urls? TIA -- Tony Holmes Ph: (416) 993-1219 Founder and Senior Systems Architect Crosswinds Internet Communications Inc. From ScanMail at attika.ch Thu Sep 4 05:05:44 2008 From: ScanMail at attika.ch (Administrator) Date: Thu Sep 4 05:05:51 2008 Subject: [MailServer Notification]Attachment Blocking Notification Message-ID: <05c601c90e4a$31f8fda0$010110ac@attikafeuer.local> The .xx.pif has been blocked, and Replace with text/file has been taken on 04.09.2008 06:52:53. Message details: Server: ATDC1 Sender: freebsd-isp@freebsd.org; Recipient: info@attika.ch; Subject: Re: document Attachment name: .xx.pif From rkramer at mweb.com Fri Sep 5 04:48:14 2008 From: rkramer at mweb.com (Rudi Kramer - MWEB) Date: Fri Sep 5 04:48:21 2008 Subject: [freebsd-isp] B/W Monitoring with IPFW References: <20080902185102.GA7176@crosswinds.net><48BDD65E.4040902@thingy.com> <20080903182107.GA15490@crosswinds.net> Message-ID: <39DC135F7F0571489196E0B6F5D58B4A03B460B0@MWBEXCH.mweb.com> > Tony Holmes > Sent: Wednesday, September 03, 2008 8:21 PM > To: Howard Jones > Cc: freebsd-isp@freebsd.org > Subject: Re: [freebsd-isp] B/W Monitoring with IPFW > > > Extending net-snmp to do this, and then using anything that can > > read/graph/report SNMP (cacti, mrtg, cricket etc) is pretty > > straightforward. If you can make a simple shell script to get the value > > I can't even get net-snmpd installed and configured correctly :) > > Googling is not turning up any nice how to's and nice explanations of the > myriad features of snmpd and snmpdtrap... so frustrating :/ Hi Tony, Try and install a app called ntop (http://www.ntop.org/) very powerful and complete bandwidth monitoring application. Regards Rudi From max at neuropunks.org Fri Sep 5 05:29:29 2008 From: max at neuropunks.org (Max Gribov) Date: Fri Sep 5 05:29:36 2008 Subject: [freebsd-isp] B/W Monitoring with IPFW In-Reply-To: <39DC135F7F0571489196E0B6F5D58B4A03B460B0@MWBEXCH.mweb.com> References: <20080902185102.GA7176@crosswinds.net><48BDD65E.4040902@thingy.com> <20080903182107.GA15490@crosswinds.net> <39DC135F7F0571489196E0B6F5D58B4A03B460B0@MWBEXCH.mweb.com> Message-ID: <48C0BF6B.8010005@neuropunks.org> Rudi Kramer - MWEB wrote: > Hi Tony, > Try and install a app called ntop (http://www.ntop.org/) very powerful > and complete bandwidth monitoring application. > > hi all, theres also darkstat - it should be in ports http://dmr.ath.cx/net/darkstat/ its claimed to be smaller and faster than ntop (i liked it anyway..) - but either way, if you're going to be running traffic profiling on the firewall itself, expect at least a little bit of performance degrade - YMMV another one i thought was cool is symon, but it doesnt really give you any granularity - just total stats per nic.. it does have a collector/sensor model, so less overhead if you dump data to another host (snmp is probably better..), and will monitor cpu/ram/disk/specific process activity - its neato also in ports or in http://www.xs4all.nl/~wpd/symon/ > Regards > Rudi > _______________________________________________ > freebsd-isp@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-isp > To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" > From jakelleydds at sbcglobal.net Fri Sep 5 10:26:34 2008 From: jakelleydds at sbcglobal.net (Jeff Kelley, DDS) Date: Fri Sep 5 10:26:40 2008 Subject: Oral Disease: Gingivitis Message-ID: <3dbd357d25a14af6a5ce5ee00a7daeed@1stnewsletters.com> Greetings from Jeff Kelley, DDS! Oral Disease: Gingivitis Gingivitis is the most common periodontal disease, affecting 90% of the population. It is an infection of the gums caused by bacteria that form plaque. In small amounts (when it is newly formed), plaque is invisible and relatively harmless. But when left to accumulate, it increases in volume and the proportion of harmful bacteria grows. These bacteria release toxins that result in inflammation of the gum tissue. Eventually, the plaque hardens and forms hard deposits called calculus or tartar. If not properly treated, gingivitis may progress to periodontitis, a periodontal disease in which there is loss of the bone that supports the teeth. If you have questions regarding gingivitis, please call our office at (817)877-1651 or email us at jakelleydds@sbcglobal.net today. Best Regards, Jeff Kelley, DDS P.S. If you have any friends or family members who you feel could use our services, please don't hesitate to have them call us. We'll be sure to take good care of them. From drleute at familydentistportwashington.com Fri Sep 5 11:10:01 2008 From: drleute at familydentistportwashington.com (Dr. Josh Leute) Date: Fri Sep 5 11:10:08 2008 Subject: Oral Disease: Gingivitis Message-ID: <84dd80d86d45489e8ec1ada8dd59e152@1stnewsletters.com> Greetings from Dr. Josh Leute! Oral Disease: Gingivitis Gingivitis is the most common periodontal disease, affecting 90% of the population. It is an infection of the gums caused by bacteria that form plaque. In small amounts (when it is newly formed), plaque is invisible and relatively harmless. But when left to accumulate, it increases in volume and the proportion of harmful bacteria grows. These bacteria release toxins that result in inflammation of the gum tissue. Eventually, the plaque hardens and forms hard deposits called calculus or tartar. If not properly treated, gingivitis may progress to periodontitis, a periodontal disease in which there is loss of the bone that supports the teeth. If you have questions regarding gingivitis, please call our office at (262)284-5884 or email us at drleute@familydentistportwashington.com today. Best Regards, Dr. Josh Leute P.S. If you have any friends or family members who you feel could use our services, please don't hesitate to have them call us. We'll be sure to take good care of them. From drz at dentistsherwood.com Fri Sep 5 12:01:11 2008 From: drz at dentistsherwood.com (Dr. Julian H. Zhitnitsky) Date: Fri Sep 5 12:01:18 2008 Subject: Oral Disease: Gingivitis Message-ID: Greetings from Dr. Julian H. Zhitnitsky! Oral Disease: Gingivitis Gingivitis is the most common periodontal disease, affecting 90% of the population. It is an infection of the gums caused by bacteria that form plaque. In small amounts (when it is newly formed), plaque is invisible and relatively harmless. But when left to accumulate, it increases in volume and the proportion of harmful bacteria grows. These bacteria release toxins that result in inflammation of the gum tissue. Eventually, the plaque hardens and forms hard deposits called calculus or tartar. If not properly treated, gingivitis may progress to periodontitis, a periodontal disease in which there is loss of the bone that supports the teeth. If you have questions regarding gingivitis, please call our office at (818)785-8388 or email us at drz@dentistsherwood.com today. Best Regards, Dr. Julian H. Zhitnitsky P.S. If you have any friends or family members who you feel could use our services, please don't hesitate to have them call us. We'll be sure to take good care of them. From mark at x86.co.za Tue Sep 16 13:39:11 2008 From: mark at x86.co.za (Mark) Date: Tue Sep 16 13:41:46 2008 Subject: cisco (client) + mpd (server) Message-ID: <48CFAE49.1070908@x86.co.za> Hi There Im trying to get a little cisco 837 to speak to a MPD4 server running on 7.0-stable. Ive been able to make them communicate but for the life of me they dont want to authenticate. Below is logs + configs.. I hope someone is kind enough to share some info with me :) MPD Config: l2tp: new -i ng0 l2tp l2tp set iface disable on-demand set iface enable proxy-arp set iface idle 0 set iface enable tcpmssfix set bundle disable multilink set link yes acfcomp protocomp # set link no pap chap # set link enable chap set link keep-alive 10 60 set link mtu 1460 set ipcp yes vjcomp protocomp set ipcp ranges 172.16.254.1/32 172.16.254.2/32 set ipcp dns 196.25.1.11 secrets file: x86-cisco Cisco Config: l2tp-class dynamicpw pseudowire-class dynamicpw encapsulation l2tpv2 interface Virtual-PPP2 no ip address no cdp enable ppp authentication chap ppp chap password 0 pseudowire 196.15.202.94 10 pw-class dynamicpw MPD error: [l2tp] LCP: state change Ack-Sent --> Opened [l2tp] LCP: auth: peer wants CHAP, I want nothing [l2tp] LCP: LayerUp [l2tp] CHAP: rec'd CHALLENGE #29 Name: "x86-cisco" Using authname "x86-cisco" [l2tp] CHAP: sending RESPONSE len:26 [l2tp] CHAP: rec'd FAILURE #29 MESG: Authentication failed [l2tp] LCP: authorization failed [l2tp] LCP: parameter negotiation failed [l2tp] LCP: state change Opened --> Stopping [l2tp] AUTH: Cleanup [l2tp] LCP: SendTerminateReq #123 [l2tp] LCP: LayerDown Cisco Error: 6d04h: Vp2 PPP: Phase is AUTHENTICATING, by this end 6d04h: Vp2 CHAP: O CHALLENGE id 29 len 30 from "x86-cisco" 6d04h: Vp2 CHAP: I RESPONSE id 29 len 30 from "x86-cisco" 6d04h: Vp2 PPP: Phase is FORWARDING, Attempting Forward 6d04h: Vp2 PPP: Phase is AUTHENTICATING, Unauthenticated User 6d04h: Vp2 PPP: Sent CHAP LOGIN Request 6d04h: Vp2 PPP: Received LOGIN Response FAIL 6d04h: Vp2 CHAP: O FAILURE id 29 len 25 msg is "Authentication failed" 6d04h: Vp2 PPP: Sending Acct Event[Down] id[373] 6d04h: Vp2 PPP: Phase is TERMINATING It seems tho If i remove the x86-home user out of the mpd secrets file it moans about not finding the user so its definatley reading the username but having some difficulty with the password? I have tried all the ppp authentication methods (pap, chap, eap, mschap etc) Chow Mark From medsalim.bouhlel at enis.rnu.tn Sat Sep 20 14:51:35 2008 From: medsalim.bouhlel at enis.rnu.tn (E-Medisys 2008) Date: Sat Sep 20 14:51:40 2008 Subject: We would like to invite you to join us for the 2nd international conference E-Medisys Message-ID: <2008920.397110,690677141203704@enis.rnu.tn> Invitation to attend E-MEDISYS 2008 conference We would like to invite you to join us for the 2nd international conference named E-MEDICAL SYSTEMS which will be held in Sfax-Tunisia from 29 to 31 October 2008. E-MEDISYS 2008 has the ambition to promote a technological reference frame, to give answers and original innovating ideas and to contribute to a common language around the telemedicine technologies. This conference will allow, on the one hand, to share experience, to make a state of the art of the theory, research, the medical information management, medical imagery, remote telemedical platforms, ergonomics of the interfaces and medical systems communicating. On the other hand, E-MEDISYS will present future innovations. The E-MEDISYS conference is an essential forum for sharing knowledge about the latest progress and advances in telemedicine technologies through papers, and has an excellent track record for fostering synergism between research teams that are working in the fields related to the conference topics. The rich assortment of tutorials, presentation sessions, and receptions will allow you to gain in-depth knowledge of fundamental principles and the latest trends in the e-medical systems. In this version, more than 150 papers have been proposed and 75 articles have been retained for publication. The article’s authors are from more than 20 countries. With its many sessions, this conference is an excellent opportunity to renew old friendships and network with new contacts. You and your accompanists will also enjoy the vibrant culture and many points of interest in our beautiful and hospitable country Tunisia. So make your plans now to join us for this exciting event. You can consult the accepted papers list included in the preliminary program of the conference at: http://www.setit.rnu.tn/e-medisys/?main=1&pg=accept_pap See you in Sfax, Please do not hesitate to contact us if you have any queries regarding MEDISYS’08. Updated information about the conference can be found at: http://www.setit.rnu.tn/E-medisys Online registration can be found at: http://www.setit.rnu.tn/e-medisys/?main=1&pg=registration Mohamed Salim BOUHLEL General Co-Chair, E-MEDISYS 2008 Director of Sfax High Institute of Electronics and Communication Head of Research Unit:Sciences & Technologies of Image and Telecommunications ( Sfax University ) GSM +216 20 200005 ============================================================================================== If you want to be removed from our database, please send an email to unsubscribe.emedisys@gmail.com with subject: Unsubscribe ============================================================================================== E-MEDISYS 2008 Second International Conference of E-Medical Systems Technically co-sponsored IEEE Sfax, Tunisia, October 29-31, 2008 http://www.setit.rnu.tn/E-medisys == E-MEDISYS 2008 PRESENTATION ============================================= E-Medisys is a new international conference, very innovative, on the topic of the telemedicine. This conference was born out of collaboration of three teams of research divided between Sfax (Tunisia), Besançon (France) and Fez (Morocco). E-Medisys, from its topic interdisciplinary, has the role to bring together the researchers, and the industrialists, who are actors of the telemedicine as well from the medical point of view as from the data-processing point of view. It is what makes a single event of it: the meeting of the actors who will allow treating the telemedicine “from beginning to end”. This conference will be held in French and English. Papers will be selected by a mixed reading panel gathering of the specialists to re-elect in the field of the telemedicine. == TOPICS =================================================================== The topics of this conference are voluntarily opened in order to support the participation of many teams (researchers, teachers, engineers, industrialists and students). A broad place will be reserved for the new ideas, with not yet succeeded work, original work positioning clearly compared to what exists. Here a non exhaustive list of the topics: Medical Information Management Patient Information Data Archiving Information Systems Data Bases Multimedia Evaluation of the Information Systems of Health Security NTIC and Health Medical Imagery Data-processing Applications for Medical Imagery Segmentation, Rebuilding 3D Computer Graphics Signal Treatments Image, Compression, Coding and Encoding Remote Telemedical Plateforms Collaborative Work, Collaborative Virtual Environments Remote Monitoring Telediagnosis, Teleconsulting E-health Information Systems Integrated of Health for the Shared and Collaborative Care Ergonomics of the Interfaces Remote Human Computer Interfaces Virtual Reality Increased reality Increased Reality Safety in Distributed Multimedia Applications Medical Systems Communicating Wireless Adhoc Networks (MANET) Personal Networks (PN), Personal Area Networks (PAN), WIMAX Ubiquity and Networks without Wire Networks of Health Sensor Networks: Patients Steady, Patient with Handicap Mobile Care Patient, Mobility Security in Networks == CONFERENCE'S PLACE ====================================================== Sfax is a city in Tunisia, located 270 km southeast of Tunis. The city is the capital of the south of Tunisia, and a Mediterranean port on the Gulf of Gabes, it is an industrial and touristic center. It is often described as Tunisia's Second city. As official transporter sponsor for the 2nd international conference E-Medisys, TUNISAIR will offer to all participant attending this Conference the following special offer: 50% discount on the excursion fares to Tunisia on Tunisair in economic class. To benefit from this very special offer contact the Tunisair Representation Offices in your country and ask for more information.