Q: Fritz!Card PCI 2.1
Holger Eitzenberger
Holger.Eitzenberger at t-online.de
Thu Jan 29 13:11:09 PST 2004
Hi,
I have a problem when running the above mentioned card. My logs
are full of msgs like
21:00:11 kruemel /kernel: ifpi2_recover 0
21:00:13 kruemel /kernel: i4b-L1 ifpi2_ph_data_req: still in state F3!
21:00:13 kruemel /kernel: isp0: pap failure
21:00:15 kruemel /kernel: i4b-L1 timer3_expired: state = F4 Awaiting Signal
21:00:15 kruemel /kernel: ifpi2_recover 0
21:00:15 kruemel /kernel: i4b-L2 i4b_mph_status_ind: unit 0, cannot access S0 bus!
21:00:15 kruemel /kernel: i4b-L3 i4b_mdl_status_ind: STI_NOL1ACC: unit 0 no outgoing access to S0
21:00:20 kruemel /kernel: i4b: unit 0, assigned TEI = 77 = 0x4d
21:00:21 kruemel /kernel: isp0: pap failure
My hardware is VIA Epia 5000 Mini-ITX with two PCI-Cards sharing
one PCI-Slot (Fritz!Card PCI 2.1, Netgear MA311 WLAN) through a 2x
Riser-Card, so my situation is somewhat "special" because these
two cards share one interrupt. Though the problem arises also if
only the Fritz!Card is plugged.
An ELSA QuickStep 1000pro works nicely.
Thanks in advance.
/Holger
--
++ GnuPG Key -> http://www.t-online.de/~holger.eitzenberger ++
More information about the freebsd-isdn
mailing list