MultiTech MT128SA
Terry Glanfield
Terry.Glanfield at program-products.co.uk
Tue Jul 22 05:25:07 PDT 2003
Hi Hans,
Thanks for the answer.
> This card might be using a CCD chip. Is it possible you could read out the
> chip name(s) on the card? For example HFC-SP?
>
> You could also try
>
> pciconf -l
I'll get this information this evening when I have access to the box.
> pnpinfo
This was in the original message but I'll repeat it here.
Regards,
Terry.
pnpinfo:
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID ASU1688 (0x88167506), Serial Number 0x00000056
PnP Version 1.0, Vendor Version 0
Device Description: ISDN CARD ....
Logical Device ID: ASU1688 0x88167506 #0
Device supports I/O Range Check
I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x8
[not 16-bit addr]
IRQ: 3 4 5 9 10 11 12 15 IRQ: High true edge sensitive
IRQ: - only one type (true/edge)
End Tag
Successfully got 6 resources, 1 logical fdevs
-- card select # 0x0001
CSN ASU1688 (0x88167506), Serial Number 0x00000056
Logical device #0
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 0
IO range check 0x00 activate 0x00
More information about the freebsd-isdn
mailing list