Installation Problem - 8.0

[Marcel Moolenaar]

On Mar 11, 2010, at 12:59 PM, Mister Itanium wrote:

*snip*

>> ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> irq 23 at device 29.7 on pci0
>> ehci0: Lazy allocation of 0x400 bytes rid 0x10 type 3 at 0x80000000
>> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0x80000000
>> ehci0: [MPSAFE]
>> ehci0: [ITHREAD]
>> usbus3: EHCI version 0.0
>> usbus3: stop timeout
>> usbus3: reset timeout
>> usbus3: reset timeout
>> 
>> ehci0: USB init failed err=18
>> 
>> fatal kernel trap (cpu 0):
>> 
>>     trap vector = 0x1e (Unaligned Reference)
>>     cr.iip      = 0xe000000004634400
>>     cr.ipsr     = 0x1210080a2010 (mfl,ic,dt,dfh,rt,cpl=0,it,ri=1,bn)
>>     cr.isr      = 0xa0400000000 (code=0,vector=0,r,ei=1,ed)
>>     cr.ifa      = 0xdeadc0dedeadc106
>>     curthread   = 0xe000000004ccd3e0
>>         pid = 0, comm = swapper
>> 
>> panic: trap
>> cpuid = 0
>> Uptime: 1s
>> Automatic reboot in 15 seconds - press a key on the console to abort
>> --> Press a key on the console to reboot,
>> --> or switch off the system now.
>> Rebooting...
>> 
> 
> 
> Problem was solved by disabling USB @ BIOS.
> Now I'm able to get into the INSTALL screen.
> 

That's good news. With FreeBSD installed, it's easier to try a few
things to see what exactly is the issue.

-- 
Marcel Moolenaar
xcllnt at mac.com