Installation Problem - 8.0

Mister Itanium itanium.user at gmail.com
Thu Mar 11 11:19:55 UTC 2010


On Thu, Mar 11, 2010 at 12:17 AM, Marcel Moolenaar <xcllnt at mac.com> wrote:

>
> On Mar 10, 2010, at 7:13 PM, Mister Itanium wrote:
>
> >
> > ehci0: USB init failed err=18
> >
> > fatal kernel trap (cpu 0):
> >
> >     trap vector = 0x1e (Unaligned Reference)
> >     cr.iip      = 0xe000000004634400
> >     cr.ipsr     = 0x1210080a2010 (mfl,ic,dt,dfh,rt,cpl=0,it,ri=1,bn)
> >     cr.isr      = 0xa0400000000 (code=0,vector=0,r,ei=1,ed)
> >     cr.ifa      = 0xdeadc0dedeadc106
> >     curthread   = 0xe000000004ccd3e0
> >         pid = 0, comm = swapper
> >
> > panic: trap
> > cpuid = 0
> > Uptime: 1s
> > Automatic reboot in 15 seconds - press a key on the console to abort
> > --> Press a key on the console to reboot,
> > --> or switch off the system now.
>
> It seems there's a problem with the USB 2.0 host controller.
> The EHCI problem is causing the kernel panic due to an
> uninitialized pointer dereference.
>
> Can you tell me what FreeBSD version and can you also boot
> verbose -- i.e. interrupt the boot in the loader and at the
> loader prompt type:
>        boot -v
>
>
> Also: do you get a "reset timeout" error immediately prior
> to the "USB init failed" error?
>
> --
> Marcel Moolenaar
> xcllnt at mac.com
>
>
>
This is the entire boot -v (verbose)
-^H\^HEntering /boot/kernel/kernel at 0xe000000004080000...

PAL Proc at 0xe00000007ff08010
SAL Proc at 0xe00000007ff48020, GP at 0xe0000000801712c0
SAL: AP wake-up vector: 0xf0
Platform clock frequency 199475857 Hz
Processor ratio 14/2, Bus ratio 1/1, ITC ratio 14/2
ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0
Processor supports 24 Region ID bits
Trying VHPT size 0x1000000
Putting VHPT at 0x6000000
Splitting [0x560c000-0x7fb40000]
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sun Nov 22 01:11:28 UTC 2009
    root at pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
UNWIND: table added: base=e000000004000000, start=e000000004bbb060,
end=e000000004bfc250
Preloaded elf kernel "/boot/kernel/kernel" at 0xe000000005608580.
Preloaded mfs_root "/boot/mfsroot" at 0xe000000005608660.
CPU: Madison (1396.33-Mhz Itanium 2)
  Origin = "GenuineIntel"  Revision = 5
  Features = 0x1<LB>
real memory  = 4282048512 (4083 MB)
Physical memory chunk(s):
0x01900000 - 0x03ffffff, 40894464 bytes (4992 pages)
0x0560c000 - 0x05ffffff, 10436608 bytes (1274 pages)
0x0a000000 - 0x7fb3ffff, 1974730752 bytes (241056 pages)
0x180000000 - 0x1fb455fff, 2068144128 bytes (252459 pages)
0x1feffe000 - 0x1ff453fff, 4546560 bytes (555 pages)
0x1ff802000 - 0x1ff8fdfff, 1032192 bytes (126 pages)
0x1ff9fe000 - 0x1ffd63fff, 3563520 bytes (435 pages)
0x1ffdfe000 - 0x1ffe0ffff, 73728 bytes (9 pages)
0x1ffe7e000 - 0x1fffb7fff, 1286144 bytes (157 pages)
avail memory = 4083957760 (3894 MB)
FPSWA Revision = 0x10012, Entry = 0xe0000001ffe60050
Table 'FACP' at 0xe00000007ff99138
Table 'APIC' at 0xe00000007ff99230
        Local APIC address=0xfee00000
        Local SAPIC entry
                ProcessorId=0x0, Id=0xc0, Eid=0x18
        Local SAPIC entry
                ProcessorId=0x1, Id=0xc6, Eid=0x18
        I/O SAPIC entry
                Id=0x0, InterruptBase=0x0, Address=0xfec00000
        I/O SAPIC entry
                Id=0x2, InterruptBase=0x18, Address=0xfaffe000
        I/O SAPIC entry
                Id=0x1, InterruptBase=0x30, Address=0xfafff000
        Interrupt source override entry
                Bus=0, Source=9, Irq=0x9
        Platform interrupt entry
                Polarity=3, TriggerMode=3, Id=0xc6, Eid=0x18, Vector=0x1e,
Irq=22
Table 'IPPT' at 0xe00000007ff99308
Table 'SPCR' at 0xe00000007ff99340
MCA: allocated 16384 bytes for state info.
SMP: waking up cpu1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: ACPI Id=1, SAPIC Id=c6, SAPIC Eid=18 (BSP)
cpu1: ACPI Id=0, SAPIC Id=c0, SAPIC Eid=18
ULE: setup cpu 0
ULE: setup cpu 1
mem: <memory>
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
ACPI: RSDP 0x7ff99000 00024 (v2 AMI   )
ACPI: XSDT 0x7ff99090 00044 (v1 AMI    TIGER_2W 01072002 MSFT 00010013)
ACPI: FACP 0x7ff99138 000F4 (v3 AMI    TIGER_2W 01072002 MSFT 00010013)
ACPI: DSDT 0x7ff9b000 0220E (v1   AMI   TIGER2W 00000000 MSFT 0100000D)
ACPI: FACS 0x7ff992c0 00040
ACPI: APIC 0x7ff99230 0008E (v1 AMI    TIGER_2W 01072002 MSFT 00010013)
ACPI: IPPT 0x7ff99308 00034 (v1 AMI    TIGER_2W 01072002 MSFT 00010013)
ACPI: SPCR 0x7ff99340 00050 (v1 AMI    TIGER_2W 01072002 MSFT 00010013)
nexus0: registered as a time-of-day clock (resolution 1000us)
acpi0: <AMI TIGER_2W> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \_SB_.CSFF.IOH5.IOHC -> bus 255 dev 28 func 5
AcpiOsDerivePciId: \_SB_.CSFF.IOH1.IO01 -> bus 255 dev 28 func 1
AcpiOsDerivePciId: \_SB_.CSFF.IOH2.IO02 -> bus 255 dev 28 func 2
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x24c2, revid=0x02
        domain=0, bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        map[20]: type I/O Port, range 32, base 0xef20, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24c4, revid=0x02
        domain=0, bus=0, slot=29, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        map[20]: type I/O Port, range 32, base 0xef40, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24c7, revid=0x02
        domain=0, bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=11
        map[20]: type I/O Port, range 32, base 0xef80, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24cd, revid=0x02
        domain=0, bus=0, slot=29, func=7        class=0c-03-20,
hdrtype=0x00, mfdev=0
        cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=0
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0, size 10, memory disabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x82
        domain=0, bus=0, slot=30, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24c0, revid=0x02
        domain=0, bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cb, revid=0x02
        domain=0, bus=0, slot=31, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=0
        map[20]: type I/O Port, range 32, base 0x1000, size  4, enabled
        map[24]: type Memory, range 32, base 0, size 10, memory disabled
pcib0: no PRT entry for 0.31.INTA
found-> vendor=0x8086, dev=0x24c3, revid=0x02
        domain=0, bus=0, slot=31, func=3
        class=0c-05-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=0
        map[20]: type I/O Port, range 32, base 0xcc0, size  5, enabled
pcib0: no PRT entry for 0.31.INTB
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xef20-0xef3f irq 16
at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef20
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f00
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xef40-0xef5f irq 19
at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef40
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f00
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xef80-0xef9f irq 18
at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef80
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f00
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> irq 23 at device 29.7
on pci0
ehci0: Lazy allocation of 0x400 bytes rid 0x10 type 3 at 0x80000000
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0x80000000
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 0.0
usbus3: stop timeout
usbus3: reset timeout
usbus3: reset timeout
ehci0: USB init failed err=18

fatal kernel trap (cpu 0):

    trap vector = 0x1e (Unaligned Reference)
    cr.iip      = 0xe000000004634400
    cr.ipsr     = 0x1210080a2010 (mfl,ic,dt,dfh,rt,cpl=0,it,ri=1,bn)
    cr.isr      = 0xa0400000000 (code=0,vector=0,r,ei=1,ed)
    cr.ifa      = 0xdeadc0dedeadc106
    curthread   = 0xe000000004ccd3e0
        pid = 0, comm = swapper

panic: trap
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...


More information about the freebsd-ia64 mailing list