Install problem HP integrity rx2660(Montecito)

[Marcel Moolenaar]

On Apr 5, 2007, at 10:00 AM, Rick Jones wrote:
> Richard Walter wrote:
>> Hello,
>> I have attached my console at the serial port at the backside of  
>> the machine (console IOIOIO). There is an auxiliary serial port  
>> too and a vga port.
>> Where can i look for the vendor or divice ID, i have attached some  
>> outputs:
>
> At the risk of putting words into Marcel's mouth I would guess  
> here. Notice the vendor and device id columns.  Of course I'm nto  
> 100% certain that is showing the uarts :)
>
>>    Seg  Bus  Dev  Fnc  Vendor  Device Slot
>>     #    #    #    #     ID      ID     #   Path
>>    ---  ---  ---  ---  ------  ------  ---  -----------
>>     00   00   01   00  0x103C  0x1303   XX  Acpi 
>> (HWP0002,PNP0A03,0)/Pci(1|0)
>>     00   00   01   01  0x103C  0x1302   XX  Acpi 
>> (HWP0002,PNP0A03,0)/Pci(1|1)
>>     00   00   01   02  0x103C  0x1048   XX  Acpi 
>> (HWP0002,PNP0A03,0)/Pci(1|2)

See the PCI ID repository on SourceForge:
	HP = 0x103c
	Diva = 0x1048

Richard's original email had:

P  Serial Acpi(HWP0002,PNP0A03,0)/Pci(1|2) Vt100+ 9600
S  VGA    Acpi(HWP0002,PNP0A03,0)/Pci(3|0)

It shows that the serial console is on PCI(1|2), which matches
the IDs.

Unfortunately, we already have those IDs. What we don't have are the
right sub-vendor and sub-device IDs :-(

Rick, could you run the lspci on Linux for me, provided you have the
same management board?

If it's safe to do, then I can also add a catch-all. However, It would
only be save to enable the first 2 ports and I don't know if there
console is typically on either of those two...

Anyway... This is what we current have in FreeBSD:

Vendor  Device  Subven  Subdev  Description
------  ------  ------  ------  -----------
0x103c, 0x1048, 0x103c, 0x1049, "HP Diva Serial [GSP] Multiport UART  
- Tosca Console"
0x103c, 0x1048, 0x103c, 0x104a, "HP Diva Serial [GSP] Multiport UART  
- Tosca Secondary"
0x103c, 0x1048, 0x103c, 0x104b, "HP Diva Serial [GSP] Multiport UART  
- Maestro SP2"
0x103c, 0x1048, 0x103c, 0x1223, "HP Diva Serial [GSP] Multiport UART  
- Superdome Console"
0x103c, 0x1048, 0x103c, 0x1226, "HP Diva Serial [GSP] Multiport UART  
- Keystone SP2"
0x103c, 0x1048, 0x103c, 0x1282, "HP Diva Serial [GSP] Multiport UART  
- Everest SP2"

Thanks,

-- 
Marcel Moolenaar
xcllnt at mac.com