FreeBSD-RELEASE-5.2.1-ia64 installation problem

Mogilny I. Aleksandr sg at astral.ntu-kpi.kiev.ua
Sat Aug 7 02:19:54 PDT 2004


Колись давно, числа десь Sat, Aug 07, 2004 at 12:24:15AM -0700
	Marcel Moolenaar мен╕ писав
> On Sat, Aug 07, 2004 at 09:59:13AM +0300, Mogilny I. Aleksandr wrote:
> > Hello,
> > I have a subject problem. I have downloaded all iso files from ftp site, 
> > written them with burncd on othe unix machine (FreeBSD-4.9) but any of 
> > cd didn't boot.
> 
> Please describe your hardware.
> 
Thereis a dmesg file in attachment
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Sun Jul 18 13:08:29 GMT 2004
    root at asd:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2405.46-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 2147418112 (2097088K bytes)
avail memory = 2086125568 (2037232K bytes)
Changing APIC ID for IO APIC #0 from 0 to 4 on chip
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 cpu2 (AP):  apic id:  6, version: 0x00050014, at 0xfee00000
 cpu3 (AP):  apic id:  7, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  4, version: 0x00178020, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0556000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fde60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 5
IOAPIC #0 intpin 18 -> irq 9
IOAPIC #0 intpin 23 -> irq 11
IOAPIC #0 intpin 17 -> irq 16
pci0: <PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2579)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5159 graphics accelerator> at 0.0 irq 2
pcib2: <PCI to PCI bridge (vendor=8086 device=257b)> at device 3.0 on pci0
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xa000-0xa01f mem 0xfc000000-0xfc01ffff irq 9 at device 1.0 on pci2
em0:  Speed:N/A  Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 2 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 5 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc400-0xc41f irq 9 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xc800-0xc81f irq 2 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 11
pcib3: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
IOAPIC #0 intpin 21 -> irq 17
pci3: <PCI bus> on pcib3
pci3: <unknown card> (vendor=0x105a, dev=0x3373) at 4.0 irq 11
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xbc00-0xbc7f mem 0xfb020000-0xfb02007f irq 17 at device 9.0 on pci3
xl0: Ethernet address: 00:02:3e:f3:89:ef
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 2 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 16
pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 16
orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xccfff,0xd5000-0xd57ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
ad0: 19092MB <WDC WD200BB-53DEA0> [38792/16/63] at ata0-master UDMA100
acd0: CD-RW <SONY CD-RW CRX230E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
em0: Link is up 100 Mbps Full Duplex
arp: 00:01:80:0a:24:e3 is using my IP address 192.168.0.1!
arp: 192.168.0.181 moved from 00:50:70:54:03:39 to 00:01:80:0a:24:e3 on em0
arp: 192.168.0.181 moved from 00:01:80:0a:24:e3 to 00:50:70:54:03:39 on em0
pid 35191 (ftp), uid 0 on /: file system full


More information about the freebsd-ia64 mailing list