how to install freebsd on HP rx2600 server

[chenbo_ku at hotmail.com]

Marcel Moolenaar
=09But how to 
>change the console in EFI to use the serial device that
>has no PCI node in the device path. 

    The detail ?

=3D=3D=3D=3D=3D=3D=3D 2003-11-11 20:36:00 =3D=3D=3D=3D=3D=3D=3D

>On Wed, Nov 12, 2003 at 11:33:33AM +0800, chen bo wrote:
>> but installation by serial console  will report error :
>=09...
>pci224: <simple comms> at device 1.0 (no driver attached)
>pci224: <simple comms, UART> at device 1.1 (no driver attached)
>vga0: <Generic PCI VGA> port 0xe000-0xe0ff mem
>0xf8020000-0xf802ffff,0xf0000000-0xf7ffffff at device 2.0 on=
 pci224
>vga0: using legacy I/O and memory addresses.
>sio0: <16550 or compatible> iomem 0xff5e0000-0xff5e0007 irq 34=
 on acpi0
>sio1: <16550 or compatible> iomem 0xff5e2000-0xff5e2007 irq 35=
 on acpi0
>=09...
>> start_init: trying /stand/sysinstall
>> 
>> fatal kernel trap (cpu 0):
>> 
>>    trap vector =3D 0x14 (Page Not Present)
>>    cr.iip      =3D 0xe00000000084b890
>>    cr.ipsr     =3D 0x1210080a6018=
 (ac,mfl,ic,i,dt,dfh,rt,cpl=3D0,it,ri=3D1,bn)
>>    cr.isr      =3D 0x20400000000 (code=3D0,vector=3D0,r,ei=3D1)
>>    cr.ifa      =3D 0x80
>>    curthread   =3D 0xe00000003d9bac60
>>        pid =3D 1, comm =3D sysinstall
>> 
>> Stopped at      devtoname+0x11:       ld8 r34=3D[r35]
>> db> 
>> 
>> 
>> 
>> How to resolve ?
>
>The kernel uses a serial device that it cannot find during bus
>enumeration. This is caused by having a DIG64 HCDP table that=
 in
>all likelyhood defines the console port on the management=
 board.
>The serial devices on the management board are not identified=
 by
>the kernel. This is because puc(4) is either not configured in=
 the
>kernel or the driver does not recognize the hardware yet. The=
 5.1
>release is too old for me to remember if the support was there.
>
>To fix it, change the console in EFI to use the serial device=
 that
>has no PCI node in the device path. In all likelyhood that=
 gives
>you sio0. Plug the cable on the upper of the 2 serial=
 connectors
>on the back. That's sio0 if I remember correctly (it's been a=
 year).
>
>HTH,
>
>-- 
> Marcel Moolenaar=09  USPA: A-39004=09=09 marcel at xcllnt.net

=3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D
=09=09=09

=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=D6=C2
=C0=F1=A3=A1
 
=09=09=09=09 
=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1chenbo_ku
=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1chenbo_ku at hotmail.com
=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A12003-11-13