[Bug 206567] [msk] msk0: watchdog timeout - 88E8053 on i386
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Sun Jan 24 12:34:54 UTC 2016
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=206567
Bug ID: 206567
Summary: [msk] msk0: watchdog timeout - 88E8053 on i386
Product: Base System
Version: 9.3-STABLE
Hardware: i386
OS: Any
Status: New
Severity: Affects Only Me
Priority: ---
Component: kern
Assignee: freebsd-bugs at FreeBSD.org
Reporter: bugs.freebsd.org at cmb.ch
CC: freebsd-i386 at FreeBSD.org
CC: freebsd-i386 at FreeBSD.org
On my MacMini (Late 2006, Macmini1,1, MA607*/A), the msk0 interface shows
usually this:
Jan 1 22:29:17 beastli kernel: msk0: watchdog timeout
Jan 1 22:29:17 beastli kernel: msk0: link state changed to DOWN
Jan 1 22:29:20 beastli kernel: msk0: link state changed to UP
and thereafter the interface won't transport any data anymore. Only a reboot
helps. This is since 9.2 (for over a year).
I have looked at patches found in this bug forum but it didn't help.
This happens when quite some traffic goes oer the interface, I presume. It
happens either once a week or every 30 minutes...
Anything I can switch on/off to configure?
Or anything I can do to circumvent the reboot? (as kernel module could be a
way) as read in #150257 ?
Thanks
Christian
Platform info:
PF firewall confugured
FreeBSD 9.3-RELEASE-p33 #0: Thu Jan 14 00:48:15 UTC 2016
mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> mem 0x90200000-0x90203fff irq
16 at device 0.0 on pci1
msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0
msk0: Ethernet address: 00:16:xx:yy:aa:qq
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
root at beastli:~ # pciconf -lbceVv @pci0:1:0:0:
mskc0 at pci0:1:0:0: class=0x020000 card=0x532111ab chip=0x436211ab rev=0x22
hdr=0x00
vendor = 'Marvell Technology Group Ltd.'
device = '88E8053 PCI-E Gigabit Ethernet Controller'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0x90200000, size 16384, enabled
bar [18] = type I/O Port, range 32, base 0x1000, size 256, disabled
cap 01[48] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 03[50] = VPD
cap 05[5c] = MSI supports 2 messages, 64 bit enabled with 1 message
cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
PCI-e errors = Correctable Error Detected
Non-Fatal Error Detected
Unsupported Request Detected
Corrected = Receiver Error
VPD ident = 'Marvell Yukon 88E8053 Gigabit Ethernet Controller'
VPD ro PN = 'Yukon 88E8053'
VPD ro EC = 'Rev. 2.2'
VPD ro MN = 'Marvell'
VPD ro SN = 'AbCdEfG334455'
VPD ro CP = ID 01 in map 0x50[0x3cc]
VPD rw VE = '00'
--
You are receiving this mail because:
You are on the CC list for the bug.
More information about the freebsd-i386
mailing list