i386/158201: re0 driver quit working on Acer AO751h between 8.0 and 8.2 (also 9.0)

Majdi S. Abbas msa at latt.net
Thu Jun 23 10:40:09 UTC 2011


>Number:         158201
>Category:       i386
>Synopsis:       re0 driver quit working on Acer AO751h between 8.0 and 8.2 (also 9.0)
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Jun 23 10:40:08 UTC 2011
>Closed-Date:
>Last-Modified:
>Originator:     Majdi S. Abbas
>Release:        8.2-RELEASE or 9.0-CURRENT
>Organization:
Lattice, L.L.C.
>Environment:
FreeBSD 9.0-CURRENT #1: Wed Jun 22 14:55:31 MST 2011
    root@:/usr/src/sys/i386/compile/AO751h i386
>Description:
The re driver worked on this machine in 8.0.

Sometime between then and 8.2-RELEASE, it stopped working.  It still doesn't work in -HEAD (as of 22-JUN-2011.)

Relevant dmesg output:

re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd0110000-0xd0110fff,0xd0100000-0xd010ffff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: 00:23:8b:e5:63:3e

re0: link state changed to UP

After boot, if one attempts to use the interface (in this case via dhclient),
the interface sits there and flaps and hits watchdog resets

re0: link state changed to DOWN
re0: link state changed to UP
re0: watchdog timeout
re0: link state changed to DOWN
re0: link state changed to UP
re0: watchdog timeout
re0: link state changed to DOWN
re0: link state changed to UP
>How-To-Repeat:
Attempt to use attached re0 interface on 8.2 or -HEAD on a host with following card:

re0 at pci0:2:0:0:	class=0x020000 card=0x02441025 chip=0x813610ec rev=0x02 hdr=0x00

Here's the config for this build, but this occurs with GENERIC as well:

# Acer Aspire AO751h config

cpu		I686_CPU
ident		AO751h

#makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols

options 	SCHED_ULE		# ULE scheduler
options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	SCTP			# Stream Control Transmission Protocol
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
options 	NFSCLIENT		# Network Filesystem Client
options 	NFSSERVER		# Network Filesystem Server
options 	NFSLOCKD		# Network Lock Manager
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
options 	COMPAT_43TTY		# BSD 4.3 TTY compat (sgtty)
options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	STACK			# stack(9) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	P1003_1B_SEMAPHORES	# POSIX-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
options 	AUDIT			# Security event auditing
options 	MAC			# TrustedBSD MAC Framework
options 	FLOWTABLE		# per-cpu routing cache
#options 	KDTRACE_HOOKS		# Kernel DTrace hooks
options 	INCLUDE_CONFIG_FILE     # Include this file in kernel

options 	KDB			# Kernel debugger related code
options 	KDB_TRACE		# Print a stack trace for a panic

# To make an SMP kernel, the next two lines are needed
options 	SMP			# Symmetric MultiProcessor Kernel
device		apic			# I/O APIC

# CPU frequency control
device		cpufreq

# Bus support.
device		acpi
device		pci

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
options 	ATA_STATIC_ID	# Static device numbering

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		kbdmux		# keyboard multiplexer

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

# Power management support (see NOTES for more options)
device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# Serial (COM) ports
device		uart		# Generic UART driver

# Parallel port
device		ppbus		# Parallel port bus (required)

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		re		# RealTek 8139C+/8169/8169S/8110S
device		rl		# RealTek 8129/8139

# Wireless NIC cards
device		wlan		# 802.11 support
options 	IEEE80211_DEBUG	# enable debug msgs
options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options 	IEEE80211_SUPPORT_MESH	# enable 802.11s draft support
device		wlan_wep	# 802.11 WEP support
device		wlan_ccmp	# 802.11 CCMP support
device		wlan_tkip	# 802.11 TKIP support
device		wlan_amrr	# AMRR transmit rate control algorithm
device		ath		# Atheros pci/cardbus NIC's
device		ath_hal		# pci/cardbus chip support
options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
device		ath_rate_sample	# SampleRate tx rate control for ath

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
device		vlan		# 802.1Q VLAN support
device		tun		# Packet tunnel.
device		pty		# BSD-style compatibility pseudo ttys
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)
device		firmware	# firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# USB support
options 	USB_DEBUG	# enable debug msgs
device		uhci		# UHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
# USB Serial devices
device		u3g		# USB-based 3G modems (Option, Huawei, Sierra)
device		uftdi		# For FTDI usb serial adapters
device		uplcom		# Prolific PL-2303 serial adapters
# USB Wireless
device		rum		# Ralink Technology RT2501USB wireless NICs
device		uath		# Atheros AR5523 wireless NICs
device		ural		# Ralink Technology RT2500USB wireless NICs
device		zyd		# ZyDAS zb1211/zb1211b wireless NICs

device		dcons		# Dumb console driver
device		dcons_crom	# Configuration ROM for dcons
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-i386 mailing list