i386/133727: chars [[[[[[[[[[[[[ occur during install process
(setting root passwd) and/or after install on console login prompt
vermaden
vermaden at interia.pl
Tue Apr 14 07:00:18 PDT 2009
>Number: 133727
>Category: i386
>Synopsis: chars [[[[[[[[[[[[[ occur during install process (setting root passwd) and/or after install on console login prompt
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Apr 14 14:00:16 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: vermaden
>Release: 6.2-RELEASE / 7.0-RELEASE / 7.1-RELEASE
>Organization:
>Environment:
I haven't rebuilt kernel/world, stock *-RELEASE uname output here.
>Description:
Outputs from diagnostic commands @ NetBSD (FreeBSD put [[[[[[[ chars on the screen ...)
Problem occurs on TOSHIBA Satellite A75 and other workstation also.
For example, after boot, if you wpould like to type root as login, you would end up with something like that:
login : ]]]]]]r]]]]]]]]]]o]]]o]]]]]t]]]]]]]]]]]]]]]]]]]
# vmstat -i
interrupt total rate
global TLB IPI 43320 91
ioapic0 pin 21 99 0
ioapic0 pin 1 942 1
ioapic0 pin 19 20780 43
ioapic0 pin 14 20 0
ioapic0 pin 15 6860 14
ioapic0 pin 17 1 0
ioapic0 pin 18 20 0
Total 72042 151
# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), vendor 0x1002(0x1002), rev 1.00
port 1 powered
port 2 addr 2: full speed, power 100 mA, config 1, USB Full Speed(0x8090), A4Tech(0x09da), rev 6.06
port 3 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), vendor 0x1002(0x1002), rev 1.00
port 1 powered
port 2 powered
port 3 powered
Controller /dev/usb2:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), vendor 0x1002(0x1002), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
# uname -a
NetBSD livecd.jibbed.org 5.0_BETA NetBSD 5.0_BETA (JIBBED5) #0: Fri Jan 9 20:08:51 CET 2009 root at imac.aydogan.net:/root/livecd/work/JIBBED5 i386
# dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0_BETA (JIBBED5) #0: Fri Jan 9 20:08:51 CET 2009
root at imac.aydogan.net:/root/livecd/work/JIBBED5
total memory = 383 MB
avail memory = 366 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
TOSHIBA Satellite A75 (PSA70U-0WQ00G)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 3066MHz, id 0xf41
cpu1 at mainbus0 apid 1: Intel 686-class, 3066MHz, id 0xf41
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
EPWR (CMP0101) at acpi0 not configured
npx1 at acpi0 (MATH, PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pckbc1 at acpi0 (KBC0, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13): aux port
pckbc2: irq 12
LPBI (PNP0400) at acpi0 not configured
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: TOSHIBA, Li-Ion, PA3383U 3658Q
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1002 product 0x5831 (rev. 0x02)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x5838 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: vendor 0x1002 product 0x5835 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4347 (rev. 0x01)
ohci0: interrupting at ioapic0 pin 19
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4348 (rev. 0x01)
ohci1: interrupting at ioapic0 pin 19
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 19 function 2: vendor 0x1002 product 0x4345 (rev. 0x01)
ehci0: interrupting at ioapic0 pin 19
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
piixpm0 at pci0 dev 20 function 0
piixpm0: vendor 0x1002 product 0x4353 (rev. 0x18)
piixpm0: interrupting at SMIpiixpm0: polling
iic0 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1
ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at ixpide0 channel 1
pcib0 at pci0 dev 20 function 3
pcib0: vendor 0x1002 product 0x434c (rev. 0x00)
ppb1 at pci0 dev 20 function 4: vendor 0x1002 product 0x4342 (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ath0 at pci2 dev 2 function 0
ath0: interrupting at ioapic0 pin 18
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 7.9 phy 4.5 radio 5.6
rtk0 at pci2 dev 3 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 19
rtk0: Ethernet address 00:0f:b0:69:0e:ec
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci2 dev 4 function 0: vendor 0x1524 product 0x1410 (rev. 0x01)
cbb0: cacheline 0x8 lattimer 0x40
cbb0: bhlc 0x24008
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
pcmcia0 at cardslot0
auixp0 at pci0 dev 20 function 5: vendor 0x1002 product 0x4341 (rev. 0x00)
auixp0: interrupting at ioapic0 pin 17
auixp0: soft resetting aclink
auixp0: not up; resetting aclink hardware
auixp0: not up; resetting aclink hardware
auixp0: aclink hardware reset successful
vendor 0x1002 product 0x434d (modem communications, revision 0x01) at pci0 dev 20 function 6 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 690 cycle TSC drift observed
auixp0: ac97: Avance Logic unknown (0x414c4752) codec; headphone, 20 bit DAC, 18 bit ADC, no 3D stereo
auixp0: ac97: ext id a07<AC97_23,AMAP,SPDIF,DRA,VRA>
audio0 at auixp0: full duplex, mmap, independent
auixp0: codec spdif support detected but disabled for now
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
IPsec: Initialized Security Association Processing.
pckbport: command timeout
wd0 at atabus0 drive 0: <WDC WD800VE-07HDT0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-820S, , 1.70> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: cd0
root on cd0a
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
acpibat0: battery info: TOSHIBA, Li-Ion, PA3383U 3658Q
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: A4Tech USB Full Speed, rev 1.10/6.06, addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev1: A4Tech USB Full Speed, rev 1.10/6.06, addr 2, iclass 3/1
uhidev1: 4 report ids
ukbd0 at uhidev1 reportid 1
ukbd0: attach failed, too many key codes
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=8, output=0, feature=0
set{u,g}id pid 498 (gnome-pty-helper) was invoked by uid 1000 ppid 497 (Terminal) with fd 2 closed
>How-To-Repeat:
Put install CD into the drive and start installation process and/or boot just installed FreeBSD and try to login.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-i386
mailing list