i386/117301: newfs on large partition from 3Ware 9550SX produces
kernel panic
Pavel May
pmay at janestcapital.com
Thu Oct 18 08:00:08 PDT 2007
>Number: 117301
>Category: i386
>Synopsis: newfs on large partition from 3Ware 9550SX produces kernel panic
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Oct 18 15:00:07 UTC 2007
>Closed-Date:
>Last-Modified:
>Originator: Pavel May
>Release: 6.2-Release
>Organization:
Jane Street Capital, LLC
>Environment:
>Description:
Hardware: Penguin Relion 102 (P4 3.6GHz, HT and SpeedStep disabled in BIOS)
RAID: 3Ware 9550SX-4LP, 4 x 320 GiB SATA HDDs; RAID-5 of HDDs 1-3, HDD4 as hot spare, latest/greatest BIOS/Firmware.
Booting is set directly off the controller.
Installed FreeBSD 6.2-R (i386). OS slice (da0s1) is 10GiB. da0s2 is the rest of the RAID, with partitions a and b spliting it down the middle.
(Fdisk output, bsdlabel output, and dmesg output are all attached).
Trying to newfs (default settings) a 300GiB /dev/da0s2a produces a repeatable kernel panic.
Disabling ACPI at boot, and/or booting to single-user mode didn't make a difference.
>How-To-Repeat:
1) Install 6.2-R (i386) directly on the RAID-5
2) Slice/partition to duplicate the setup described
3) Try to newfs the large partitions.
>Fix:
Unknown.
Patch attached with submission follows:
mstore1 # fdisk /dev/da0
******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=77806 heads=255 sectors/track=63 (16065 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=77806 heads=255 sectors/track=63 (16065 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 20964762 (10236 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 2 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 20964825, size 1228988565 (600092 Meg), flag 0
beg: cyl 1023/ head 255/ sector 63;
end: cyl 1023/ head 254/ sector 63
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
------------------------------------------------------------------------------
mstore1 # bsdlabel /dev/da0s1
# /dev/da0s1:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 1048576 0 4.2BSD 2048 16384 8
b: 8337040 1048576 swap
c: 20964762 0 unused 0 0 # "raw" part, don't edit
d: 1048576 9385616 4.2BSD 2048 16384 8
e: 1048576 15650448 4.2BSD 2048 16384 8
f: 4265738 16699024 4.2BSD 2048 16384 28552
g: 5216256 10434192 4.2BSD 2048 16384 28552
mstore1# bsdlabel /dev/da0s2
# /dev/da0s2:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 614494258 16 unused 0 0
b: 614494200 614494275 unused 0 0
c: 1228988565 0 unused 0 0 # "raw" part, don't edit
------------------------------------------------------------------------------
mstore1 # dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
root at dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.60GHz (3591.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf64 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe59d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
real memory = 2147418112 (2047 MB)
avail memory = 2096300032 (1999 MB)
ACPI APIC Table: <IESC OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <IESC OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
3ware device driver for 9000 series storage controllers, version: 3.60.02.012
twa0: <3ware 9000 series Storage Controller> port 0xac00-0xac3f mem 0xfa000000-0xfbffffff,0xfc6ff000-0xfc6fffff irq 24 at device 1.0 on pci2
twa0: [GIANT-LOCKED]
twa0: DEBUG: (0x04: 0x00FB): BBU and HBA state out of sync:
twa0: ERROR: (0x04: 0x005F): Cache synchronization failed; some data lost: unit=0
twa0: INFO: (0x04: 0x0056): Battery charging completed:
twa0: INFO: (0x04: 0x0053): Battery capacity test is overdue:
twa0: WARNING: (0x04: 0x0008): Unclean shutdown detected: unit=0
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9550SX-4LP, 4 ports, Firmware FE9X 3.08.02.007, BIOS BE9X 3.08.00.002
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
bge0: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfc8f0000-0xfc8fffff irq 16 at device 0.0 on pci5
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:a0:d1:e5:1b:9e
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib6
bge1: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfc9f0000-0xfc9fffff irq 17 at device 0.0 on pci6
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:a0:d1:e5:1b:9f
uhci0: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfebffc00-0xfebfffff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xccfff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3591017352 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <CD-224E-N/1.AA> at ata0-master UDMA33
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9550SX-4LP DISK 3.08> Fixed Direct Access SCSI-5 device
da0: 100.000MB/s transfers
da0: 610330MB (1249955840 512 byte sectors: 255H 63S/T 77806C)
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-i386
mailing list