i386/113134: [ahc] Adaptec SCSI Er

[Flavio Cordeiro]

Adapter SCSI: Adaptec 29160N
Tape Unit: IBM ULT3580-TD3 SCSI

Tape Descrition and tests in linux:
IBM TotalStorage Tape Diagnostic Tool   - Text Report

               +--------------------+                  
+--------------------+
     Model:    | ULT3580-TD3        |       Serial No: | 
1210223651         |
               +--------------------+                  
+--------------------+

               +-----+        +-----+                  +---------------+
         Host: | 2   |   ID:  | 6   |       Microcode: | 73P5          |
               +-----+        +-----+                  +---------------+
         Bus:  | 0   |   LUN: | 0   |       Changer:   |               |
               +-----+        +-----+                  +---------------+

               +------------------------------+
     Result:   | PASSED                       |
               +------------------------------+
     Code:     | OK                           |
               +------------------------------+
               +------------------------------+
     Bin Log:  | 1210223651.001.blz           |
               +------------------------------+
     Dumps:    |                              |
               |                              |
               |                              |
               |                              |
               +------------------------------+
               +-----+                  +-----+
     1st FSC:  | 14B8|        2nd FSC:  | 0000|
               | 14B8|                  | 0000|
               | 14B8|                  | 0000|
               | 14B8|                  | 0000|
               | 14B8|                  | 0000|
               | 14B8|                  | 0000|
               | 14B8|                  | 0000|
               | 14B8|                  | 0000|
               | 0000|                  | 0000|
               | 0000|                  | 0000|
               +-----+                  +-----+



SCSI error:
SCSI subsystem initialized
scsi0 : ata_piix
scsi1 : ata_piix
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
sd 1:0:0:0: Attached scsi disk sda
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        <Adaptec 29160N Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
  Type:   Sequential-Access                  ANSI SCSI revision: 03
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x6c) 
SCSIRATE(0x                                                                             
80)
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x85) 
SCSIRATE(0x                                                                             
80)
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x85) 
SCSIRATE(0x                                                                             
80)
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x6b) 
SCSIRATE(0x                                                                             
80)
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x85) 
SCSIRATE(0x                                                                             
80)
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x85) 
SCSIRATE(0x                                                                             
80)
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x6b) 
SCSIRATE(0x                                                                             
80)
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x85) 
SCSIRATE(0x                                                                             
80)
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x6b) 
SCSIRATE(0x                                                                             
80)
(scsi2:A:6:0): parity error detected in Data-in phase. SEQADDR(0x85) 
SCSIRATE(0x                                                                             
80)
 target2:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 127)
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:6:0: Attached scsi generic sg1 type 1
st 2:0:6:0: Attached scsi tape st0



Thanks BSD Team for your GREAT WORK.


Flavio



Mark Linimon escreveu:
> Old Synopsis: Adaptec SCSI Er
> New Synopsis: [ahc] Adaptec SCSI Er
>
> State-Changed-From-To: open->feedback
> State-Changed-By: linimon
> State-Changed-When: Sat Jun 2 19:05:37 UTC 2007
> State-Changed-Why: 
> You've given us the trace, but you haven't told us specifically what your
> hardware is, or what conditions under which you see the bug (e.g. if you
> unplug the tape drive, does everything work?)
>
>
> Responsible-Changed-From-To: freebsd-i386->linimon
> Responsible-Changed-By: linimon
> Responsible-Changed-When: Sat Jun 2 19:05:37 UTC 2007
> Responsible-Changed-Why: 
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=113134
>