i386/97263: Only detects first drive

Frank Arnold far at 4damind.com
Thu May 18 14:40:19 UTC 2006


The following reply was made to PR i386/97263; it has been noted by GNATS.

From: Frank Arnold <far at 4damind.com>
To: bug-followup at FreeBSD.org
Cc:  
Subject: Re: i386/97263: Only detects first drive
Date: Thu, 18 May 2006 16:33:46 +0200

 providing some more informations:
 
 pciconf -lv
 -----------------------------------------------------------------------------------------
 
 agp0 at pci0:0:0:	class=0x060000 card=0x80a31043 chip=0x31881106 rev=0x01 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'Apollo K8T800 CPU to PCI Bridge'
     class    = bridge
     subclass = HOST-PCI
 pcib1 at pci0:1:0:	class=0x060400 card=0x00000080 chip=0xb1881106 rev=0x00 hdr=0x01
     vendor   = 'VIA Technologies Inc'
     device   = 'Apollo K8HTB CPU to AGP 2.0/3.0 Bridge'
     class    = bridge
     subclass = PCI-PCI
 fwohci0 at pci0:7:0:	class=0x0c0010 card=0x808a1043 chip=0x30441106 rev=0x80 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller'
     class    = serial bus
     subclass = FireWire
 atapci0 at pci0:8:0:	class=0x010400 card=0x80f51043 chip=0x3373105a rev=0x02 hdr=0x00
     vendor   = 'Promise Technology Inc'
     device   = 'PDC20378 FastTrak 378/SATA 378 RAID Controller'
     class    = mass storage
     subclass = RAID
 skc0 at pci0:10:0:	class=0x020000 card=0x811a1043 chip=0x432011ab rev=0x13 hdr=0x00
     vendor   = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
     device   = '88E8001/8003/8010 Gigabit Ethernet Controller with Integrated PHY (copper)'
     class    = network
     subclass = ethernet
 none0 at pci0:12:0:	class=0x040000 card=0x13eb0070 chip=0x036e109e rev=0x11 hdr=0x00
     vendor   = 'Conexant (Was: Brooktree Corp)'
     device   = 'Bt878/Fusion 878A Mediastream Controller'
     class    = multimedia
     subclass = video
 none1 at pci0:12:1:	class=0x048000 card=0x13eb0070 chip=0x0878109e rev=0x11 hdr=0x00
     vendor   = 'Conexant (Was: Brooktree Corp)'
     device   = 'Bt878/Fusion878A Video Capture (Audio Section)'
     class    = multimedia
 none2 at pci0:14:0:	class=0x040100 card=0xd6301412 chip=0x17121412 rev=0x02 hdr=0x00
     vendor   = 'VIA Technologies Inc (Was: IC Ensemble Inc)'
     device   = 'ICE1712 Envy24 Multichannel Audio Controller'
     class    = multimedia
     subclass = audio
 atapci1 at pci0:15:0:	class=0x010400 card=0x80ed1043 chip=0x31491106 rev=0x80 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT8237  VT6410 SATA RAID Controller'
     class    = mass storage
     subclass = RAID
 atapci2 at pci0:15:1:	class=0x01018a card=0x80ed1043 chip=0x05711106 rev=0x06 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
     class    = mass storage
     subclass = ATA
 uhci0 at pci0:16:0:	class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
 uhci1 at pci0:16:1:	class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
 uhci2 at pci0:16:2:	class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
 uhci3 at pci0:16:3:	class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
 ehci0 at pci0:16:4:	class=0x0c0320 card=0x80ed1043 chip=0x31041106 rev=0x86 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT6202 USB 2.0 Enhanced Host Controller'
     class    = serial bus
     subclass = USB
 isab0 at pci0:17:0:	class=0x060100 card=0x80ed1043 chip=0x32271106 rev=0x00 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT8237 PCI-to-ISA Bridge'
     class    = bridge
     subclass = PCI-ISA
 hostb0 at pci0:24:0:	class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
     vendor   = 'Advanced Micro Devices (AMD)'
     device   = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
     class    = bridge
     subclass = HOST-PCI
 hostb1 at pci0:24:1:	class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
     vendor   = 'Advanced Micro Devices (AMD)'
     device   = 'Athlon 64 / Opteron Address Map'
     class    = bridge
     subclass = HOST-PCI
 hostb2 at pci0:24:2:	class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
     vendor   = 'Advanced Micro Devices (AMD)'
     device   = 'Athlon 64 / Opteron DRAM Controller'
     class    = bridge
     subclass = HOST-PCI
 hostb3 at pci0:24:3:	class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
     vendor   = 'Advanced Micro Devices (AMD)'
     device   = 'Athlon 64 / Opteron Miscellaneous Control'
     class    = bridge
     subclass = HOST-PCI
 none3 at pci1:0:0:	class=0x030000 card=0x00000000 chip=0x034310de rev=0xa1 hdr=0x00
     vendor   = 'NVIDIA Corporation'
     device   = 'GeForce FX 5700LE [NV36.3]'
     class    = display
     subclass = VGA
 
 
 
 cat /var/run/dmesg.boot
 ------------------------------------------------------------------------------
 
 Copyright (c) 1992-2006 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD 6.1-RELEASE #0: Sun May  7 04:32:43 UTC 2006
     root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 ACPI APIC Table: <A M I  OEMAPIC >
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: AMD Athlon(tm) 64 Processor 3200+ (2202.83-MHz 686-class CPU)
   Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
   Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
   AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
 real memory  = 1072889856 (1023 MB)
 avail memory = 1040961536 (992 MB)
 ioapic0: Changing APIC ID to 1
 MADT: Forcing active-low polarity and level trigger for SCI
 ioapic0 <Version 0.3> irqs 0-23 on motherboard
 kbd1 at kbdmux0
 acpi0: <A M I OEMRSDT> on motherboard
 acpi0: Power Button (fixed)
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 cpu0: <ACPI CPU> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 agp0: <VIA 8385 host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 pci1: <display, VGA> at device 0.0 (no driver attached)
 fwohci0: <VIA Fire II (VT6306)> port 0xbc00-0xbc7f mem 0xf7a00000-0xf7a007ff irq 16 at device 7.0 on pci0
 fwohci0: OHCI version 1.0 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:e0:18:00:00:5c:61:2b
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 firewire0: <IEEE1394(FireWire) bus> on fwohci0
 fwe0: <Ethernet over FireWire> on firewire0
 if_fwe0: Fake Ethernet address: 02:e0:18:5c:61:2b
 fwe0: Ethernet address: 02:e0:18:5c:61:2b
 fwe0: if_start running deferred for Giant
 sbp0: <SBP-2/SCSI over FireWire> on firewire0
 fwohci0: Initiate bus reset
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
 firewire0: bus manager 0 (me)
 atapci0: <Promise PDC20378 SATA150 controller> port 0xec00-0xec3f,0xdc00-0xdc0f,0xcc00-0xcc7f mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b1ffff irq 18 at device 8.0 on pci0
 ata2: <ATA channel 0> on atapci0
 ata3: <ATA channel 1> on atapci0
 ata4: <ATA channel 2> on atapci0
 skc0: <Marvell Gigabit Ethernet> port 0xa000-0xa0ff mem 0xf7e00000-0xf7e03fff irq 17 at device 10.0 on pci0
 skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
 sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
 sk0: Ethernet address: 00:0e:a6:70:11:b9
 miibus0: <MII bus> on sk0
 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
 e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
 pci0: <multimedia, video> at device 12.0 (no driver attached)
 pci0: <multimedia> at device 12.1 (no driver attached)
 pci0: <multimedia, audio> at device 14.0 (no driver attached)
 atapci1: <VIA 6420 SATA150 controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xd800-0xd803,0xd400-0xd40f,0xd000-0xd0ff irq 20 at device 15.0 on pci0
 ata5: <ATA channel 0> on atapci1
 ata6: <ATA channel 1> on atapci1
 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
 ata0: <ATA channel 0> on atapci2
 ata1: <ATA channel 1> on atapci2
 uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device 16.0 on pci0
 uhci0: [GIANT-LOCKED]
 usb0: <VIA 83C572 USB controller> on uhci0
 usb0: USB revision 1.0
 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.1 on pci0
 uhci1: [GIANT-LOCKED]
 usb1: <VIA 83C572 USB controller> on uhci1
 usb1: USB revision 1.0
 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhci2: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.2 on pci0
 uhci2: [GIANT-LOCKED]
 usb2: <VIA 83C572 USB controller> on uhci2
 usb2: USB revision 1.0
 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhci3: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.3 on pci0
 uhci3: [GIANT-LOCKED]
 usb3: <VIA 83C572 USB controller> on uhci3
 usb3: USB revision 1.0
 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf7f00000-0xf7f000ff irq 21 at device 16.4 on pci0
 ehci0: [GIANT-LOCKED]
 usb4: EHCI version 1.0
 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
 usb4: <VIA VT6202 USB 2.0 controller> on ehci0
 usb4: USB revision 2.0
 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub4: 8 ports with 8 removable, self powered
 uhub5: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2
 uhub5: single transaction translator
 uhub5: 4 ports with 4 removable, self powered
 isab0: <PCI-ISA bridge> at device 17.0 on pci0
 isa0: <ISA bus> on isab0
 acpi_button0: <Power Button> on acpi0
 acpi_button1: <Sleep Button> on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
 fdc0: [FAST]
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 pmtimer0 on isa0
 ppc0: parallel port not found.
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
 sio0: type 8250 or not responding
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 ums0: Logitech USB Receiver, rev 1.10/16.00, addr 2, iclass 3/1
 ums0: 16 buttons and Z dir.
 ugen0: Syncrosoft ProtectExecuter, rev 1.10/1.01, addr 2
 Timecounter "TSC" frequency 2202826249 Hz quality 800
 Timecounters tick every 1.000 msec
 acd0: DVDR <BENQ DVD DD DW1620/B7T9> at ata1-master UDMA33
 acd1: CDRW <HL-DT-ST GCE-8520B/1.00> at ata1-slave UDMA33
 ad4: 114498MB <SAMSUNG SP1213C SV100-27> at ata2-master SATA150
 ar0: 114498MB <Promise Fasttrak RAID0 (stripe 64 KB)> status: READY
 ar0: disk0 READY using ad4 at ata2-master
 Trying to mount root from ufs:/dev/ad4s3a
 
 
 
 atacontrol list:
 -----------------------------------------------------------------
 
 ATA channel 0:
     Master:      no device present
     Slave:       no device present
 ATA channel 1:
     Master: acd0 <BENQ DVD DD DW1620/B7T9> ATA/ATAPI revision 0
     Slave:  acd1 <HL-DT-ST GCE-8520B/1.00> ATA/ATAPI revision 0
 ATA channel 2:
     Master:  ad4 <SAMSUNG SP1213C/SV100-27> Serial ATA v1.0
     Slave:       no device present
 ATA channel 3:
     Master:      no device present
     Slave:       no device present
 ATA channel 4:
     Master:      no device present
     Slave:       no device present
 ATA channel 5:
     Master:      no device present
     Slave:       no device present
 ATA channel 6:
     Master:      no device present
     Slave:       no device present
 
 
 -- 
  Frank Arnold
 ================================
 eMail              : far at 4damind.com
 The 4damind-Project: http://4damind.com
 Arnisoft           : http://arnisoft.net


More information about the freebsd-i386 mailing list