i386/89409: 6-STABLE requires ACPI disabled, 5-STABLE did not (regression)

Neil Hoggarth neil at hoggarth.me.uk
Tue Nov 22 00:30:18 PST 2005


>Number:         89409
>Category:       i386
>Synopsis:       6-STABLE requires ACPI disabled, 5-STABLE did not (regression)
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Nov 22 08:30:16 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Neil Hoggarth
>Release:        6.0-STABLE
>Organization:
>Environment:
FreeBSD shadowfax.localdomain 6.0-STABLE FreeBSD 6.0-STABLE #0: Sun Nov 20 18:25:47 GMT 2005     root at shadowfax.localdomain:/usr/obj/home/src/sys/GENERIC  i386

>Description:
I'm posting this in response to Mark Linimon's call for reports of regressions in 6-STABLE wrt 5-STABLE (http://lists.freebsd.org/pipermail/freebsd-stable/2005-November/019730.html)

This may be a duplicate of PR 87568, but I wasn't sure, so I thought I'd open this.

I have a system which ran extremely reliably under RELENG_5 (from 5.3-RELEASE onwards). The machine suffers from frequent hard lockups when running a RELENG_6 kernel. The problem can be entirely worked around by disabling ACPI ("hint.acpi.0.disabled=1" in /boot/loader.conf). No such precaution was necessary with a RELENG_5 kernel.

The system is an AMD Athlon XP 2500+ processor on an Abit NF-7S v2 motherboard, with BIOS version "nVidia-nForce-6A61BA1BC-26". The system has a HighPoint Rocket RAID 1640 SATA card which I suspect (but have not proven) to be implicated in the problems - freezes appear to be related to disk activity.

I've tried building a kernel with GDB, INVARIENTS and WITNESS in an attempt to find out more, and not had any more success: the kernel still locks up, doesn't panic or output any more diagnostics when it does. The system will not break to the debugger when frozen.

dmesg:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Sun Nov 20 18:25:47 GMT 2005
    root at shadowfax.localdomain:/usr/obj/home/src/sys/GENERIC
mptable_probe: MP Config Table has bad signature: \^S\^F
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2500+ (1830.01-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory  = 1073676288 (1023 MB)
avail memory = 1037545472 (989 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.1.INTA
$PIR: No matching entry for 0.2.INTA
$PIR: No matching entry for 0.2.INTB
$PIR: No matching entry for 0.2.INTC
$PIR: No matching entry for 0.13.INTA
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe0001000-0xe0001fff irq 5 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe0004000-0xe0004fff irq 10 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe0005000-0xe00050ff irq 11 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pcm0: <Creative CT5880-C> port 0x9000-0x903f irq 5 at device 7.0 on pci1
pcm0: <TriTech TR28602 AC97 Codec>
pcm0: [GIANT-LOCKED]
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x9400-0x943f mem 0xdf020000-0xdf03ffff,0xdf000000-0xdf01ffff irq 10 at device 8.0 on pci1
em0: Ethernet address: 00:0e:0c:06:c2:3a
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x9800-0x983f mem 0xdf040000-0xdf05ffff,0xdf060000-0xdf07ffff irq 11 at device 9.0 on pci1
em1: Ethernet address: 00:0e:0c:06:c2:34
atapci0: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port 0x9c00-0x9c07,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xac00-0xacff irq 15 at device 10.0 on pci1
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port 0xb000-0xb007,0xb400-0xb403,0xb800-0xb807,0xbc00-0xbc03,0xc000-0xc0ff irq 15 at device 10.1 on pci1
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
atapci2: <nVidia nForce2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
fwohci0: <1394 Open Host Controller Interface> mem 0xe0002000-0xe00027ff,0xe0003000-0xe000303f irq 15 at device 13.0 on pci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:50:8d:fc:92:11
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:fc:92:11
fwe0: Ethernet address: 02:00:00:fc:92:11
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
nvidia0: <GeForce FX 5200> mem 0xdc000000-0xdcffffff,0xd0000000-0xd7ffffff irq 5 at device 0.0 on pci2
nvidia0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd17ff,0xd2000-0xd37ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
uscanner0: EPSON EPSON Scanner 010F, rev 1.10/1.00, addr 2
Timecounter "TSC" frequency 1830009939 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <PIONEER DVD-RW DVR-109/1.40> at ata0-master UDMA66
ad4: 286188MB <Maxtor 6B300S0 BANC1BY0> at ata2-master UDMA133
ad6: 286188MB <Maxtor 6B300S0 BANC1980> at ata3-master UDMA133
ad8: 152627MB <Seagate ST3160023AS 3.18> at ata4-master UDMA133
ad10: 152627MB <Seagate ST3160023AS 3.18> at ata5-master UDMA133
GEOM_MIRROR: Device m0 created (id=2355982473).
GEOM_MIRROR: Device m0: provider ad4 detected.
GEOM_MIRROR: Device m0: provider ad6 detected.
GEOM_MIRROR: Device m0: provider ad6 activated.
GEOM_MIRROR: Device m0: provider ad4 activated.
GEOM_MIRROR: Device m0: provider mirror/m0 launched.
GEOM_MIRROR: Device m1 created (id=3939754819).
GEOM_MIRROR: Device m1: provider ad8 detected.
GEOM_MIRROR: Device m1: provider ad10 detected.
GEOM_MIRROR: Device m1: provider ad10 activated.
GEOM_MIRROR: Device m1: provider ad8 activated.
GEOM_MIRROR: Device m1: provider mirror/m1 launched.

>How-To-Repeat:
              
>Fix:
              
>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-i386 mailing list