i386/77477 : AHA-1542CP SCSI failed to probe

[Rick Voland]

The following reply was made to PR i386/77477; it has been noted by GNATS.

From: Rick Voland <rpvoland at facstaff.wisc.edu>
To: bug-followup at FreeBSD.org
Cc:  
Subject: Re:  i386/77477 : AHA-1542CP SCSI failed to probe
Date: Sat, 12 Nov 2005 10:38:40 -0600

 Please close this problem report with my thanks to the FreeBSD team.  I 
 successfully upgraded to
 
 $ uname -a
 FreeBSD brian.local.bsd 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Sun Nov  6 
 16:11:10 CST 2005     root at brian.local.bsd:/usr/obj/usr/src/sys/BRIAN  i386
 $
 
 The AHA-1542CP is now properly recognized
 
 aha2: <Adaptec 1542/aha-1535> at port 0x334-0x337 iomem 0xd0000-0xd3fff 
 irq 11 drq 5 on isa0
 aha2: AHA-1542CP FW Rev. F.0 (ID=46) SCSI Host Adapter, SCSI ID 7, 16 CCBs
 aha2: [GIANT-LOCKED]
 
 
 I successfully used the cdburner attached to this SCSI adapter.
 
 I added a line to the generic device.hints file provided with FreeBSD 
 6.0-RELEASE
 
 hint.ppc.0.flags="0x64"
 
 so my printer port is now recognized, too.
 
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x64 on isa0
 ppc0: Generic chipset (EPP-only) in EPP mode (EPP 1.9)
 ppbus0: <Parallel port bus> on ppc0
 ppbus0: IEEE1284 device found /ECP_RLE
 Probing for PnP devices on ppbus0:
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Polled port
 ppi0: <Parallel I/O> on ppbus0
 
 
 
 Thanks much.
 
 
 -- 
 
 rpvoland at spamcop.net