i386/79729: umass, da0 not detected by devfs for SimpleDrive

Ed Lee metrojunky at yahoo.com
Sat Apr 9 12:10:23 PDT 2005


>Number:         79729
>Category:       i386
>Synopsis:       umass, da0 not detected by devfs for
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          update
>Submitter-Id:   current-users
>Arrival-Date:   Sat Apr 09 19:10:21 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Ed Lee
>Release:        FreeBSD 5.3-RELEASE i386
>Organization:
Columbia University 
>Environment:
System: FreeBSD cabroncito 5.3-RELEASE FreeBSD
5.3-RELEASE #0: Thu Apr 7 13:50:00 EDT 2005
root at cabroncito:/usr/obj/usr/src/sys/MYKERNEL i386

cabroncito# camcontrol inquiry da0
camcontrol: cam_lookup_pass: CAMGETPASSTHRU ioctl
failed
cam_lookup_pass: No such file or directory
cam_lookup_pass: either the pass driver isn't in your
kernel
cam_lookup_pass: or da0 doesn't exist

SimpleTech SimpleDrive Deluxe P/N:STI-U2F36/160
connected by USB 2.0

DMESG:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
 The Regents of the University of California. All
rights reserved.
FreeBSD 5.3-RELEASE #0: Thu Apr  7 13:50:00 EDT 2005
    root at cabroncito:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.04-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
 
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 267845632 (255 MB)
avail memory = 252448768 (240 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on
motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845G host to AGP bridge> mem
0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver
attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A>
port 0x1cc0-0x1cdf irq 10 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on
uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B>
port 0x1ce0-0x1cff irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on
uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
ulpt0: Brother Industries product 0x000d, rev
1.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
pci0: <serial bus, USB> at device 29.7 (no driver
attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
bfe0: <Broadcom BCM4401 Fast Ethernet> mem
0xe0204000-0xe0205fff irq 10 at device 1.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
bfe0: Ethernet address: 00:0b:db:17:2d:77
bfe0: [GIANT-LOCKED]
cbb0: <TI4510 PCI-CardBus Bridge> irq 10 at device 4.0
on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem
0xe0200000-0xe0203fff,0xe0206000-0xe02067ff irq 10 at
device 4.1 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:4f:34:04:03:48:41
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:4f:03:48:41
fwe0: Ethernet address: 02:c0:4f:03:48:41
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x2020-0x202f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at
device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver
attached)
pci0: <multimedia, audio> at device 31.5 (no driver
attached)
pci0: <simple comms> at device 31.6 (no driver
attached)
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem
0xe3800-0xe3fff,0xdc000-0xdffff,0xc0000-0xcefff on
isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
Timecounter "TSC" frequency 2392042428 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDRW <MATSHITA CD-RW/DVD-ROM UJDA740/1.03> at
ata0-master UDMA33
ad2: 28615MB <IC25N030ATCS04-0/CA3OA72A> [58140/16/63]
at ata1-master UDMA100
Mounting root from ufs:/dev/ad2s2a

Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root
hub(0x0000), Intel(0x0000)
, rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root
hub(0x0000), Intel(0x0000)
, rev 1.00
 port 1 addr 2: full speed, self powered, config 1,
product 0x000d(0x000d), Brot
her Industries(0x04f9), rev 1.00
 port 2 powered

cabroncito# ls /dev
acd0            cuaa0           mem            
sysmouse        ttyva
ad2             cuaia0          net             ttyd0 
         ttyvb
ad2s1           cuala0          net1            ttyid0
         ttyvc
ad2s2           devctl          net2            ttyld0
         ttyvd
ad2s2a          devstat         net3            ttyp0 
         ttyve
ad2s2b          fd              network         ttyp1 
         ttyvf
ad2s2c          fido            nfs4            ttyp2 
         ulpt0
ad2s2d          fw0             null            ttyp3 
         unlpt0
ad2s2e          fw0.0           pci             ttyv0 
         urandom
ad2s2f          fwmem0          psm0            ttyv1 
         usb
agpgart         fwmem0.0        ptyp0           ttyv2 
         usb0
ata             geom.ctl        ptyp1           ttyv3 
         usb1
atkbd0          io              ptyp2           ttyv4 
         xpt0
bpf0            kbd0            ptyp3           ttyv5 
         zero
bpsm0           klog            random          ttyv6
console         kmem            stderr          ttyv7
consolectl      log             stdin           ttyv8
ctty            mdctl           stdout          ttyv9


>Description:
  I have a SimpleTech SimpleDrive external Hard Drive
(160 GB) via USB 2.0, and although the USB controllers
are fine, I don't see that umass is found by devfs,
and neither does da0 appear in /dev.
 
>How-To-Repeat:
 I can't mount the drive. 
>Fix:

 



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
>Release-Note:
>Audit-Trail:
>Unformatted:
 SimpleDrive 


More information about the freebsd-i386 mailing list