i386/72334: FreeBSD 5.3 Beta6 and Beta7 carsh on boot
George Mitchell
george at m5p.com
Mon Oct 4 14:10:29 PDT 2004
>Number: 72334
>Category: i386
>Synopsis: FreeBSD 5.3 Beta6 and Beta7 carsh on boot
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Oct 04 21:10:28 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: George Mitchell
>Release: FreeBSD 5.3-BETA(6|7) i386
>Organization:
>Environment:
System: FreeBSD 5.3 BETA7 boot-only ISO downloaded from ftp.freebsd.org
Motherboard: FIC VA-503+
Here's a dmesg from 5.2, which currently runs just fine:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004
root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a07000.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc0a071f4.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0a072a4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 511766528 (488 MB)
K6-family MTRR support enabled (2 registers)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdd50
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:7 INTD BIOS irq 9
pci_cfgintr: 0:9 INTA BIOS irq 10
pci_cfgintr: 0:10 INTA BIOS irq 7
agp0: <VIA 82C597 (Apollo VP3) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586B UDMA33 controller> port 0xe400-0xe40f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib2: <PCI-PCI bridge> at device 7.3 on pci0
pcm0: <Creative CT5880-C> port 0xe800-0xe83f irq 10 at device 9.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xf3000000-0xf30000ff irq 7 at device 10.0 on pci0
rl0: Ethernet address: 00:50:22:96:d3:6c
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
ppc0: <Parallel port> at port 0x278-0x27f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
aha1 at port 0x330-0x333 irq 11 drq 5 on isa0
aha1: AHA-1542CF FW Rev. C.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 501139086 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc4878060
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA33
acd0: DVDROM <DVD-ROM OEM316B> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xc48fc850
GEOM: create disk da1 dp=0xc48d4c50
GEOM: create disk da2 dp=0xc48d4850
da0 at aha1 bus 0 target 1 lun 0
da0: <CONNER CFP1060E LKM1.05 2035> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers
da0: 1001MB (2050801 512 byte sectors: 64H 32S/T 1001C)
da1 at aha1 bus 0 target 2 lun 0
da1: <CONNER CFP1060S SUN1.05 245C> Fixed Direct Access SCSI-2 device
da1: 3.300MB/s transfers
da1: 1010MB (2070400 512 byte sectors: 64H 32S/T 1010C)
da2 at aha1 bus 0 target 6 lun 0
da2: <IOMEGA ZIP 100 D.06> Removable Direct Access SCSI-2 device
da2: 3.300MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(da2:aha1:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:aha1:0:6:0): CAM Status: SCSI Status Error
(da2:aha1:0:6:0): SCSI Status: Check Condition
(da2:aha1:0:6:0): NOT READY asc:3a,0
(da2:aha1:0:6:0): Medium not present
(da2:aha1:0:6:0): Unretryable error
Opened disk da2 -> 6
(da2:aha1:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:aha1:0:6:0): CAM Status: SCSI Status Error
(da2:aha1:0:6:0): SCSI Status: Check Condition
(da2:aha1:0:6:0): NOT READY asc:3a,0
(da2:aha1:0:6:0): Medium not present
(da2:aha1:0:6:0): Unretryable error
Opened disk da2 -> 6
Mounting root from ufs:/dev/ad0s2a
>Description:
FreeBSD 5.3-BETA6 or BETA7 crashes immediately upon booting
>How-To-Repeat:
Burn a CD with BETA7 boot-only ISO image. Insert CD into drive.
Boot. Within one or two seconds after the 15 second SCSI settling
delay, system gets a fatal trap 12:
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x3c
fault code = supervisor write, page not present
instruction pinter = 0x8:0xc05d69ad
stack pointer = 0x10:0xd4424ce4
frame pointer = 0x10:0xd4424ce8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 2 (g_event)
trap number = 12
panic: page fault
cpuid = 0
Uptime: 17s
>Fix:
You tell me. Is there something that needs to get updated in th
aha driver? At the time of the panic, the tail end of some text
which just scrolled off the screen seems to indicate problems
scanning the SCSI bus.
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-i386
mailing list