i386/61303: 5.2-REL hangs during boot with 3-port pyramid.de NIC (worked on 4.7-4.9)

[Kurt Jaeger]

>Number:         61303
>Category:       i386
>Synopsis:       5.2-REL hangs during boot with 3-port pyramid.de NIC (worked on 4.7-4.9)
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Jan 13 01:20:17 PST 2004
>Closed-Date:
>Last-Modified:
>Originator:     Kurt Jaeger
>Release:        FreeBSD 5.2-RELEASE i386
>Organization:
LF.net Netzwerksysteme GmbH
>Environment:
System: FreeBSD toast.c0mplx.org 4.9-RELEASE FreeBSD 4.9-RELEASE #6: Wed Dec 31 21:17:12 CET 2003     pi at toast.c0mplx.org:/usr/src/sys/compile/TOAST  i386

The same system hangs during boot, see below, therefore no uname -a
of the 5.2 system.

>Description:

There is a vendor in Germany for 3-port NICs based on the
Intel 82559ER Embedded 10/100 Ethernet chip:

http://www.pyramid.de/d/builttosuit/3nic.shtml?id=4

When this board is installed, the 5.2 REL iso does not boot.
It hungs right after the PCI bridge is detected.

Here's the output of pciconv -l -v on a freebsd 4.9 system:

pcib3 at pci2:12:0:        class=0x060400 card=0x000000dc chip=0xb1528086 rev=0x00 
hdr=0x01
    vendor   = 'Intel Corporation'
    device   = 'S21152BB PCI to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
fxp0 at pci3:0:0:  class=0x020000 card=0x00000000 chip=0x12098086 rev=0x09 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82559ER Fast Ethernet Controller'
    class    = network
    subclass = ethernet
fxp1 at pci3:1:0:  class=0x020000 card=0x00000000 chip=0x12098086 rev=0x09 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82559ER Fast Ethernet Controller'
    class    = network
    subclass = ethernet
fxp2 at pci3:2:0:  class=0x020000 card=0x00000000 chip=0x12098086 rev=0x09 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82559ER Fast Ethernet Controller'
    class    = network
    subclass = ethernet
none6 at pci3:3:0: class=0x070103 card=0x00001415 chip=0x84031415 rev=0x00 hdr=0x00
    vendor   = 'Oxford Semiconductor Ltd'
    device   = 'OX12PCI840 PCI Parallel Port'
    class    = simple comms
    subclass = parallel port

On a 4.9, it is detected during bootup as

pcib3: <PCI to PCI bridge (vendor=8086 device=b152)> at device 12.0 on pci2
pci3: <PCI bus> on pcib3
fxp0: <Intel 82559ER Embedded 10/100 Ethernet> port 0xb800-0xb83f mem 0xe8800000
-0xe881ffff,0xe9000000-0xe9000fff irq 10 at device 0.0 on pci3
fxp0: Ethernet address 00:50:c2:01:fc:0c
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559ER Embedded 10/100 Ethernet> port 0xb400-0xb43f mem 0xe7800000
-0xe781ffff,0xe8000000-0xe8000fff irq 9 at device 1.0 on pci3
fxp1: Ethernet address 00:50:c2:01:fc:0d
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: <Intel 82559ER Embedded 10/100 Ethernet> port 0xb000-0xb03f mem 0xe6800000
-0xe681ffff,0xe7000000-0xe7000fff irq 9 at device 2.0 on pci3
fxp2: Ethernet address 00:50:c2:01:fc:0e
inphy2: <i82555 10/100 media interface> on miibus2
inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci3: <unknown card> (vendor=0x1415, dev=0x8403) at 3.0 irq 11

On a 5.2, it hungs after the

pci3: <PCI bus> on pcib3


>How-To-Repeat:

Boot 5.2 ISO, wait for system hang.

>Fix:

No idea right now.

>Release-Note:
>Audit-Trail:
>Unformatted: