i386/63098: Compaq Workstation IDE CDROM drive not probed
David Burns
david.burns at dugeem.net
Thu Feb 19 17:20:19 PST 2004
>Number: 63098
>Category: i386
>Synopsis: Compaq Workstation IDE CDROM drive not probed
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Feb 19 17:20:18 PST 2004
>Closed-Date:
>Last-Modified:
>Originator: David Burns
>Release: 5.2.1-RC2
>Organization:
(this space available for rent)
>Environment:
FreeBSD duel.ryde.dugeem.net 5.2.1-RC2 FreeBSD 5.2.1-RC2 #0: Thus Feb 12 16:28:31 GMT 2004 root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/sys/GENERIC i386
>Description:
System is a Compaq Workstation 5100 with dual PCI buses (ServerWorks chipset), dual PII 333MHz CPUs and 384MB RAM.
IDE controller is on motherboard (unidentifiable chipset) and has only a secondary channel connector for IDE CD-ROM. The IDE CD-ROM is a Compaq/Matshita CR-5850.
System correctly boots from IDE CD-ROM (ie from BIOS) - but IDE CD-ROM is not found during device probing.
NB CD-ROM suffered similar problem to PR 43762 - hence is probably controller issue???
dmesg (verbose) extract from 5.2.1-RC2:
atapci0: <Generic ATA Controller> port 0x6000-0x600f,0-0x3,0-0x7,0-0x3,0-0x7 irq 15 at device 15.1 on pci0
ata0: reset tp1 mask=03 ostat0=51 ostat1=01
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
[no further ata* or acd* messages]
dmesg extract from 4.9
atapci0: <Generic PCI ATA Controller> port 0x6000-0x600f,0-0x3,0-0x7,0-0x3,0-0x7 irq 15 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
..
acd0: MODE_SENSE_BIG command timeout - resetting
ata0: resetting devices .. done
acd0: read data overrun 28/6
acd0: CDROM <MATSHITA CR-5850> at ata0-master PIO3
>How-To-Repeat:
1. Boot system with FreeBSD v5.2.1 disk in CD-ROM
2. Observe CD-ROM is not found during device probing
>Fix:
Unknown (yet).
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-i386
mailing list