i386/70942: Genius Wireless USB mouse: moused doesn't work correctly

Roman Pavlik rp at tns.cz
Wed Aug 25 07:30:25 PDT 2004

>Number:         70942
>Category:       i386
>Synopsis:       Genius Wireless USB mouse: moused doesn't work correctly
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-i386
>State:          open
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Aug 25 14:30:25 GMT 2004
>Originator:     Roman Pavlik
>Release:        5.2-CURRENT-20040710-JPSNAP
FreeBSD belzebub.tns.cz 5.2-CURRENT-20040710-JPSNAP FreeBSD 5.2-CURRENT-20040710-JPSNAP #8: Mon Aug  2 09:35:41 CEST 2004     rpav at belzebub.tns.cz:/usr/src/sys/i386/compile/BELZEBUB  i386

Strange behavior of USB mouse. Moving mouse doesn't generate any action.  Even with moused -f -d -p /dev/ums1 moving mouse generate no data. Pressing the left and right physical buttons simultanously is only action which generate something, nothing else.
Dmesg is:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT-20040710-JPSNAP #8: Mon Aug  2 09:35:41 CEST 2004
    rpav at belzebub.tns.cz:/usr/src/sys/i386/compile/BELZEBUB
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1400MHz (1398.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
real memory  = 251592704 (239 MB)
avail memory = 240717824 (229 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INSYDE RSDT_000> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0xe000-0xe007 mem 0xf0000000-0xf007ffff,0xb0000000-0xb7ffffff irq 11 at device 2.0 on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1200-0x121f at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: vendor 0x0603 USB Mouse STD., rev 1.00/1.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1600-0x161f at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass0: USB Flash Disk, rev 2.00/2.00, addr 2
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1700-0x171f at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ukbd0: KYE SYSTEMS CORP. product 0x002c, rev 1.10/0.01, addr 2, iclass 3/1
kbd1 at ukbd0
ums1: KYE SYSTEMS CORP. Wireless TwinTouch Optical Office, rev 1.10/0.01, addr 2, iclass 3/1
ums1: 5 buttons and Z dir.
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <VIA VT6306> port 0xc100-0xc17f mem 0xe0001800-0xe0001fff irq 11 at device 0.0 on pci1
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:3b:44:00:06:a6
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:00:06:a6
fwe0: Ethernet address: 02:02:3f:00:06:a6
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xe0001000-0xe00010ff irq 11 at device 1.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:02:3f:0f:c3:63
pci1: <network> at device 2.0 (no driver attached)
cbb0: <ENE CB1410 PCI-CardBus Bridge> at device 4.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1100-0x110f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0xe200-0xe23f,0xe100-0xe1ff mem 0xf0080600-0xf00806ff,0xf0080400-0xf00805ff irq 5 at device 31.5 on pci0
pcm0: <Avance Logic ALC202 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
sio0 port 0x7f8-0x7ff,0x3f8-0x3ff irq 4 drq 1 on acpi0
sio0: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xe6000-0xe6fff,0xe0000-0xe17ff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1398816515 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 28615MB <TOSHIBA MK3021GAS> [58140/16/63] at ata0-master UDMA33
acd0: CDRW <QSI CD-RW/DVD-ROM SBW-242> at ata1-master PIO4
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <VMAX 256MB 2.00> Removable Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C)
Mounting root from ufs:/dev/ad0s2a

connect Genius Wireless Optical Office Kit to FreeBSD 5.2-20040710 SNAP box. Try to run moused in debugging mode.

More information about the freebsd-i386 mailing list