From markocpc at gmail.com  Fri Oct  2 21:58:53 2009
From: markocpc at gmail.com (Lagrange Marc)
Date: Fri Oct  2 21:58:59 2009
Subject: Only one sysctl node if two battery on the laptop ?
Message-ID: <1b5ab4050910021428m70baea2cm4e3236384e68e66@mail.gmail.com>

Hi,

I've a Fujitsu Siemens CELSIUS Mobile H which can have two battery.

apm command show :

% apm
APM version: 1.2
APM Management: Enabled
AC Line status: off-line
Battery Status: high
Remaining battery life: 99%
Remaining battery time:  1:36:00
Number of batteries: 2
Battery 0:
not present
Battery 1:
	Battery Status: high
	Remaining battery life: 99%
	Remaining battery time:  1:36:00

OR :

% apm
APM version: 1.2
APM Management: Enabled
AC Line status: on-line
Battery Status: charging
Remaining battery life: 50%
Remaining battery time: unknown
Number of batteries: 2
Battery 0:
	Battery Status: low
	Remaining battery life: 0%
	Remaining battery time: unknown
Battery 1:
	Battery Status: charging
	Remaining battery life: 100%
	Remaining battery time: unknown

Sysctl :

% sysctl hw.acpi.battery
hw.acpi.battery.life: 100
hw.acpi.battery.time: -1
hw.acpi.battery.state: 2
hw.acpi.battery.units: 2
hw.acpi.battery.info_expire: 5

OR :

% sysctl hw.acpi.battery
hw.acpi.battery.life: 50
hw.acpi.battery.time: -1
hw.acpi.battery.state: 2
hw.acpi.battery.units: 2
hw.acpi.battery.info_expire: 5

The first run is with one battery, the second with two (one battery is
dead and the other is good)

Why only one battery shown in sysctl and not hw.acpi.battery.<battery
number>.{life,time,...} ?

uname -a : FreeBSD cornichon 8.0-RC1 FreeBSD 8.0-RC1 #1: Sat Sep 19
13:02:09 CEST 2009     marc@cornichon:/usr/obj/usr/src/sys/CORNICHON
i386

Thanks.
From yuval_levy at yahoo.com  Sat Oct  3 01:04:50 2009
From: yuval_levy at yahoo.com (yuval levy)
Date: Sat Oct  3 02:40:35 2009
Subject: Intel S3420GPLC
Message-ID: <348455.8055.qm@web50512.mail.re2.yahoo.com>

Hi all

I've searched the archives and the web in vain. Maybe somebody here can tell me how well FreeBSD stable supports Intel's entry level server board S3420GPLC?

specifically, will it work with the on board RAID?

thanks
Yuv



      
From Olivier.Nicole at cs.ait.ac.th  Sat Oct  3 03:50:51 2009
From: Olivier.Nicole at cs.ait.ac.th (Olivier Nicole)
Date: Sat Oct  3 03:50:59 2009
Subject: List of words for Crack
Message-ID: <200910030331.n933VHPJ069269@banyan.cs.ait.ac.th>

Hi,

I have modified Crack 5.0a (/usr/ports/security/crack) to check
passwords that are used for Windows NT and Samba.

Now, in order to start Crack on production on my Samba server, I'd
like to use as many dictionary files as possible.

Where could I find files of words (ideally one word per line), in many
languages using Roman alphabet?

I have already included all files from /usr/shar/dict, but I am sure
there are other such lists available somewhere.

Best regards,

Olivier
From olivier at gautherot.net  Sat Oct  3 04:21:17 2009
From: olivier at gautherot.net (Olivier Gautherot)
Date: Sat Oct  3 04:21:22 2009
Subject: FreeBSD 8.0-RC1 on an Atom n330
Message-ID: <dcfb161c0910022056r6e80c96bo60b89cc4f7905f63@mail.gmail.com>

Hi folks!

For the newbies wishing to set up a cheap machine with reasonable power
consumption, I can suggest the Atom processor.
I bought one recently (the Intel D945GCLF2) and it performs quite well
compared to my previous C3-based VIA board.
I have not got round to try the sound yet and still share the IDE port
between a HD and a DVD drive but the results are really promising.

Note: the first set up requires a bit of fiddling around to get the system
to start: there seems to be something weird with either IDE controller (need
to disable the SMART mode) or the graphics memory (yes, it is shared with
the system) but, all in all, it's a decent investment for a small server.

I'll drop a line if something goes wrong but currently it's running happily
5 compiles in parallel...

Cheers
--
Olivier Gautherot
olivier@gautherot.net
From mav at FreeBSD.org  Mon Oct  5 05:09:03 2009
From: mav at FreeBSD.org (Alexander Motin)
Date: Mon Oct  5 05:09:09 2009
Subject: Only one sysctl node if two battery on the laptop ?
In-Reply-To: <1254532999.00169673.1254520805@10.7.7.3>
References: <1254532999.00169673.1254520805@10.7.7.3>
Message-ID: <4AC97964.4010908@FreeBSD.org>

Lagrange Marc wrote:
> Why only one battery shown in sysctl and not hw.acpi.battery.<battery
> number>.{life,time,...} ?

Why not? Applications that want to have full information could use acpi
interface to obtain it, just like `acpiconf -i X` does.

-- 
Alexander Motin
From nealie at kobudo.homeunix.net  Mon Oct  5 14:34:23 2009
From: nealie at kobudo.homeunix.net (Neal Nelson)
Date: Mon Oct  5 14:34:46 2009
Subject: FreeBSD 8.0-RC1 on an Atom n330
In-Reply-To: <dcfb161c0910022056r6e80c96bo60b89cc4f7905f63@mail.gmail.com>
References: <dcfb161c0910022056r6e80c96bo60b89cc4f7905f63@mail.gmail.com>
Message-ID: <9DEAD882-7297-49A0-BA86-0695E21B9F10@kobudo.homeunix.net>


On 2009-10-03, at 05:56 , Olivier Gautherot wrote:

> Hi folks!
>
> For the newbies wishing to set up a cheap machine with reasonable  
> power
> consumption, I can suggest the Atom processor.
> I bought one recently (the Intel D945GCLF2) and it performs quite well
> compared to my previous C3-based VIA board.
> I have not got round to try the sound yet and still share the IDE port
> between a HD and a DVD drive but the results are really promising.
>
> Note: the first set up requires a bit of fiddling around to get the  
> system
> to start: there seems to be something weird with either IDE  
> controller (need
> to disable the SMART mode) or the graphics memory (yes, it is shared  
> with
> the system) but, all in all, it's a decent investment for a small  
> server.
>
> I'll drop a line if something goes wrong but currently it's running  
> happily
> 5 compiles in parallel...
>
> Cheers
> --
> Olivier Gautherot
> olivier@gautherot.net

I've been using the Intel D945GCLF (not 2) for some time as my mail/ 
web/VoIP server and it's run flawlessly. Installed without a hitch and  
no tweeks necessary. I did change the MCH fan for a quieter one  
though, as apart from the disc, it was the only noise in the box.
From agh at coolrhaug.com  Mon Oct  5 18:46:13 2009
From: agh at coolrhaug.com (Alastair Hogge)
Date: Mon Oct  5 18:46:19 2009
Subject: Intel DP45SG motherboard problem (amd64)
Message-ID: <200910060219.29214.agh@coolrhaug.com>

Hey Andrew,

Re you're thread (http://lists.freebsd.org/pipermail/freebsd-hardware/2009-
June/005883.html) to freebsd-hardware back in June. As you may remember, I 
have the same hardware and the same problem, I would like to further diagnose 
and hopefully find a solution to our problem.

Could you please explain how you managed a serial connection to the system?

Both my DP45SG have no serial connections. The best I can do is Firewire, 
which works very well, however the installation cds don't come with Firewire 
support enabled in the boot loader.

Thanks
-al
 Alastair Hogge
From paul+fbsd at it.ca  Sat Oct 10 21:30:05 2009
From: paul+fbsd at it.ca (Paul Chvostek)
Date: Sat Oct 10 21:30:40 2009
Subject: juke box problem - "chio: /dev/ch0: CHIOMOVE: Device not configured"
Message-ID: <20091010211452.GA44208@it.ca>

Hi there.

I have a tape library, but I can't seem to send it commands.

It's recognized on the bus:

  # grep ch0 /var/run/dmesg.boot 
  ch0 at isp0 bus 0 target 0 lun 1
  ch0: <HP MSL G3 Series 6.00> Removable Changer SCSI-5 device 
  ch0: 400.000MB/s transfers
  ch0: Command Queueing Enabled
  ch0: 48 slots, 2 drives, 1 picker, 0 portals

And I can read status and voltags and such from it:

  # chio status -vS | tail -8
  slot 42: <ACCESS,FULL> voltag: <000026L4:0> source: <slot 42>
  slot 43: <ACCESS,FULL> voltag: <000020L4:0> source: <slot 43>
  slot 44: <ACCESS,FULL> voltag: <000039L4:0> source: <slot 44>
  slot 45: <ACCESS,FULL> voltag: <000040L4:0> source: <slot 45>
  slot 46: <ACCESS,FULL> voltag: <000043L4:0> source: <slot 46>
  slot 47: <ACCESS,FULL> voltag: <000031L4:0> source: <slot 47>
  drive 0: <ACCESS> voltag: <:0> source: <>
  drive 1: <ACCESS,FULL> voltag: <000030L4:0> source: <slot 16>

But I can't send commands:

  # chio move slot 43 drive 0
  chio: /dev/ch0: CHIOMOVE: Device not configured
  # tail -6 /var/log/messages
  Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): MOVE MEDIUM. CDB: a5 0 0 0 4 14 0 1 0 0 0 0 
  Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): CAM Status: SCSI Status Error
  Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): SCSI Status: Check Condition
  Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): ILLEGAL REQUEST asc:25,0
  Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): Logical unit not supported
  Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): Unretryable error

What am I missing?

Thanks.  :-)

p


-- 
  Paul Chvostek                                             <paul@it.ca>
  Operations / Abuse / Whatever
  it.canada, hosting and development                   http://www.it.ca/

From sean.bruno at dsl-only.net  Sat Oct 10 22:16:01 2009
From: sean.bruno at dsl-only.net (Sean Bruno)
Date: Sat Oct 10 22:16:12 2009
Subject: juke box problem - "chio: /dev/ch0: CHIOMOVE: Device not
 configured"
In-Reply-To: <20091010211452.GA44208@it.ca>
References: <20091010211452.GA44208@it.ca>
Message-ID: <1255211359.2521.15.camel@Lappy>

On Sat, 2009-10-10 at 17:14 -0400, Paul Chvostek wrote:
> 000031L4


Huh ... have you tried moving the tape by "voltag" ??

e.g.

move voltag 000020L4 drive 0


Sean

From tarkhil at webmail.sub.ru  Sun Oct 11 00:03:58 2009
From: tarkhil at webmail.sub.ru (Alex Povolotsky)
Date: Sun Oct 11 00:04:26 2009
Subject: 6.2-RELEASE does not use second CPU on pentium D
Message-ID: <462F15B4.4010201@webmail.sub.ru>

Hello!

I have a Pentium D box, running 6.2-RELEASE. In dmesg, I see CPU#1 
launched, but I never see any process running on it, and mptable shows

cluster-one# mptable -verbose

===============================================================================

MPTable

 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009e800
 searching CMOS 'top of mem' @ 0x0009e400 (633K)
 searching default 'top of mem' @ 0x0009fc00 (639K)
 searching BIOS @ 0x000f0000

 MP FPS found in BIOS @ physical addr: 0x000fe200

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:                     BIOS
  physical address:             0x000fe200
  signature:                    '_MP_'
  length:                       16 bytes
  version:                      1.4
  checksum:                     0x9f
  mode:                         Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:             0x000fe210
  signature:                    'PCMP'
  base table length:            64
  version:                      1.4
  checksum:                     0x7f
  OEM ID:                       ''
  Product ID:                   ''
  OEM table pointer:            0x00000000
  OEM table size:               0
  entry count:                  1
  local APIC address:           0xfee00000
  extended table length:        0
  extended table checksum:      0

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:     APIC ID Version State           Family  Model   Step    
Flags
                 0       0x14    BSP, usable     15      6       4       
0xbfebfbff

===============================================================================

while in dmesg

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #2: Thu Apr 19 00:19:54 MSD 2007
    tarkhil@cluster-one.zinester.com:/usr/obj/usr/src/sys/P4D
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2808.41-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf64  Stepping = 4
  
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH
,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
real memory  = 1046757376 (998 MB)
avail memory = 1015095296 (968 MB)
ACPI APIC Table: <INTEL  DG965SS >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard

[...]
SMP: AP CPU #1 Launched!

The kernel is, of course, SMP.

What can I do, where can I search for solution?

Second core IS enabled in BIOS
cluster-one# sysctl hw | grep cpu
hw.ncpu: 2
hw.acpi.cpu.cx_supported: C1/0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00%
cluster-one# sysctl machdep | grep cpu
machdep.cpu_idle_hlt: 1
machdep.hlt_cpus: 2
machdep.hlt_logical_cpus: 0
machdep.logical_cpus_mask: 2

so second CPU is halted, attempt to start it with sysctl does not help
Alex.


_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
From case at sdf.lonestar.org  Mon Oct 12 16:18:11 2009
From: case at sdf.lonestar.org (John Case)
Date: Mon Oct 12 16:18:19 2009
Subject: SSL/AES acceleration in FreeBSD ?
Message-ID: <Pine.NEB.4.64.0910121554080.3170@otaku.freeshell.org>


This presentation document from meetBSD 2008:

http://www.paeps.cx/pubs/crypto_acceleration/slides.pdf

lists these supported devices:

glxsb(4)  AMD Geode
hifn(4)  Hifn
padlock(4)  VIA Padlock
safe(4)  SafeNet
ubsec(4)  Broadcom/Bluesteel

However, I can only find "safe" as a isted device in generic kernel 
configuration files.  The other devices are not anywhere in kernel config 
files.

I am able to find hifn.ko and /sys/modules/padlock and ubsec.ko in the 
source tree, however.

glxsb, however, is nowhere to be found.

My goal is to accelerate the Tor onion router using hardware on FreeBSD. 
Since safe(4) is a standard kernel config option, that seemed a likely 
starting place, however a cursory search shows that this is not really a 
working device and certainly not a trouble-free item to implement.

Are any implementations of hardware crypto acceleration both stable and 
trouble-free in FreeBSD ?

I appreciate all comments and suggestions.
From korvus at comcast.net  Mon Oct 12 18:33:20 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon Oct 12 18:33:33 2009
Subject: SSL/AES acceleration in FreeBSD ?
In-Reply-To: <Pine.NEB.4.64.0910121554080.3170@otaku.freeshell.org>
References: <Pine.NEB.4.64.0910121554080.3170@otaku.freeshell.org>
Message-ID: <4AD3728E.8010509@comcast.net>


John Case wrote:
>
> This presentation document from meetBSD 2008:
>
> http://www.paeps.cx/pubs/crypto_acceleration/slides.pdf
>
> lists these supported devices:
>
> glxsb(4)  AMD Geode
> hifn(4)  Hifn
> padlock(4)  VIA Padlock
> safe(4)  SafeNet
> ubsec(4)  Broadcom/Bluesteel
>
> However, I can only find "safe" as a isted device in generic kernel 
> configuration files.  The other devices are not anywhere in kernel 
> config files.  cd
>
I can personally verify FreeBSD's support for the Geode (glxsb(4)) and 
various hifn(4) and ubsec(4) devices.  The code is all there and has 
been there for some time:
glxsb(4) - /usr/src/sys/dev/glxsb
hifn(4) - /usr/src/sys/dev/hifn
ubsec(4) - /usr/src/sys/dev/ubsec

I'm not sure about the kernel options, but all of the above are 
typically built as modules with the GENERIC kernel.  After loading the 
module, the devices are then made available through the cryptodev(4) 
driver.  OpenSSL and several tools 
(/usr/src/tools/tools/crypto/cryptotest & cryptostats) can confirm they 
are being used.

>
> My goal is to accelerate the Tor onion router using hardware on 
> FreeBSD. Since safe(4) is a standard kernel config option, that seemed 
> a likely starting place, however a cursory search shows that this is 
> not really a working device and certainly not a trouble-free item to 
> implement.

You will may find that for any fairly modern dual-core CPU (even an 
Athlon64 X2), the CPU will outperform pretty much all of the hardware 
crypto-accelerator offerings, except for the most recent and high-end.  
This is *especially* true when you are doing many small cryptographic 
operations, which I assume Tor may be doing.  You'll still at least get 
the benefit of offloading all of these operations from the CPU, freeing 
it up to spend time on other tasks.
>
> Are any implementations of hardware crypto acceleration both stable 
> and trouble-free in FreeBSD ?
In the testing I've done, the hifn, ubsec, and glxsb devices all work 
quite well.  I haven't seen any problems with any of them.  If you're 
still looking to select a card, I'd recommend the newest Broadcom 
offerings that you can find on eBay at a fair price - these use the 
ubsec(4) driver.
>
> I appreciate all comments and suggestions.
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to 
> "freebsd-hardware-unsubscribe@freebsd.org"
>


From jhb at freebsd.org  Tue Oct 13 14:42:15 2009
From: jhb at freebsd.org (John Baldwin)
Date: Tue Oct 13 14:42:39 2009
Subject: 6.2-RELEASE does not use second CPU on pentium D
In-Reply-To: <462F15B4.4010201@webmail.sub.ru>
References: <462F15B4.4010201@webmail.sub.ru>
Message-ID: <200910131040.55465.jhb@freebsd.org>

On Wednesday 25 April 2007 4:47:48 am Alex Povolotsky wrote:
> Hello!
> 
> I have a Pentium D box, running 6.2-RELEASE. In dmesg, I see CPU#1 
> launched, but I never see any process running on it, and mptable shows
> 
> cluster-one# mptable -verbose
> 
> 
===============================================================================
> 
> MPTable
> 
>  looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009e800
>  searching CMOS 'top of mem' @ 0x0009e400 (633K)
>  searching default 'top of mem' @ 0x0009fc00 (639K)
>  searching BIOS @ 0x000f0000
> 
>  MP FPS found in BIOS @ physical addr: 0x000fe200
> 
> -------------------------------------------------------------------------------
> 
> MP Floating Pointer Structure:
> 
>   location:                     BIOS
>   physical address:             0x000fe200
>   signature:                    '_MP_'
>   length:                       16 bytes
>   version:                      1.4
>   checksum:                     0x9f
>   mode:                         Virtual Wire
> 
> -------------------------------------------------------------------------------
> 
> MP Config Table Header:
> 
>   physical address:             0x000fe210
>   signature:                    'PCMP'
>   base table length:            64
>   version:                      1.4
>   checksum:                     0x7f
>   OEM ID:                       ''
>   Product ID:                   ''
>   OEM table pointer:            0x00000000
>   OEM table size:               0
>   entry count:                  1
>   local APIC address:           0xfee00000
>   extended table length:        0
>   extended table checksum:      0
> 
> -------------------------------------------------------------------------------
> 
> MP Config Base Table Entries:
> 
> --
> Processors:     APIC ID Version State           Family  Model   Step    
> Flags
>                  0       0x14    BSP, usable     15      6       4       
> 0xbfebfbff
> 
> 
===============================================================================
> 
> while in dmesg
> 
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-RELEASE-p3 #2: Thu Apr 19 00:19:54 MSD 2007
>     tarkhil@cluster-one.zinester.com:/usr/obj/usr/src/sys/P4D
> WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
> WARNING: MPSAFE network stack disabled, expect reduced performance.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2808.41-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf64  Stepping = 4
>   
> 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH
> ,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>>
>   AMD Features=0x20100000<NX,LM>
>   AMD Features2=0x1<LAHF>
> real memory  = 1046757376 (998 MB)
> avail memory = 1015095296 (968 MB)
> ACPI APIC Table: <INTEL  DG965SS >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> 
> [...]
> SMP: AP CPU #1 Launched!
> 
> The kernel is, of course, SMP.
> 
> What can I do, where can I search for solution?
> 
> Second core IS enabled in BIOS
> cluster-one# sysctl hw | grep cpu
> hw.ncpu: 2
> hw.acpi.cpu.cx_supported: C1/0
> hw.acpi.cpu.cx_lowest: C1
> hw.acpi.cpu.cx_usage: 100.00%
> cluster-one# sysctl machdep | grep cpu
> machdep.cpu_idle_hlt: 1
> machdep.hlt_cpus: 2
> machdep.hlt_logical_cpus: 0
> machdep.logical_cpus_mask: 2
> 
> so second CPU is halted, attempt to start it with sysctl does not help
> Alex.

What does 'sysctl machdep | grep hyper' show?

-- 
John Baldwin
From paul+fbsd at it.ca  Wed Oct 14 06:55:35 2009
From: paul+fbsd at it.ca (Paul Chvostek)
Date: Wed Oct 14 06:57:18 2009
Subject: juke box problem - "chio: /dev/ch0: CHIOMOVE: Device not
	configured"
In-Reply-To: <1255211359.2521.15.camel@Lappy>
References: <20091010211452.GA44208@it.ca> <1255211359.2521.15.camel@Lappy>
Message-ID: <20091014065309.GA95320@it.ca>

Hi Sean,

On Sat, Oct 10, 2009 at 02:49:19PM -0700, Sean Bruno wrote:
> 
> On Sat, 2009-10-10 at 17:14 -0400, Paul Chvostek wrote:
> > 000031L4
> 
> Huh ... have you tried moving the tape by "voltag" ??
> 
> e.g.
> 
> move voltag 000020L4 drive 0

I have now, but with the same result:

  # chio status -v | grep drive
  drive 0: <ACCESS,FULL> voltag: <000039L4:0>
  drive 1: <ACCESS,FULL> voltag: <000030L4:0>
  #
  # chio move voltag 000030L4 slot 44
  chio: /dev/ch0: CHIOMOVE: Device not configured
  #
  # tail -6 /var/log/messages
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): MOVE MEDIUM. CDB: a5 0 0 0 0 2 4 15 0 0 0 0 
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): CAM Status: SCSI Status Error
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): SCSI Status: Check Condition
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): ILLEGAL REQUEST asc:25,0
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Logical unit not supported
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Unretryable error


Is there a way to determine whether this problem is with the device or
with FreeBSD?  Note that I *can* move the tapes around using the juke
box's web gui, so it's not a physical problem.

For reference:

  # grep 'at isp0' /var/run/dmesg.boot 
  sa0 at isp0 bus 0 target 0 lun 0
  ch0 at isp0 bus 0 target 0 lun 1

Thanks muchly.


-- 
  Paul Chvostek                                             <paul@it.ca>
  Operations / Abuse / Whatever
  it.canada, hosting and development                   http://www.it.ca/

From ken at kdm.org  Wed Oct 14 15:20:12 2009
From: ken at kdm.org (Kenneth D. Merry)
Date: Wed Oct 14 15:20:19 2009
Subject: juke box problem - "chio: /dev/ch0: CHIOMOVE: Device not
	configured"
In-Reply-To: <20091014065309.GA95320@it.ca>
References: <20091010211452.GA44208@it.ca> <1255211359.2521.15.camel@Lappy>
	<20091014065309.GA95320@it.ca>
Message-ID: <20091014150111.GA54658@nargothrond.kdm.org>

On Wed, Oct 14, 2009 at 02:53:09 -0400, Paul Chvostek wrote:
> Hi Sean,
> 
> On Sat, Oct 10, 2009 at 02:49:19PM -0700, Sean Bruno wrote:
> > 
> > On Sat, 2009-10-10 at 17:14 -0400, Paul Chvostek wrote:
> > > 000031L4
> > 
> > Huh ... have you tried moving the tape by "voltag" ??
> > 
> > e.g.
> > 
> > move voltag 000020L4 drive 0
> 
> I have now, but with the same result:
> 
>   # chio status -v | grep drive
>   drive 0: <ACCESS,FULL> voltag: <000039L4:0>
>   drive 1: <ACCESS,FULL> voltag: <000030L4:0>
>   #
>   # chio move voltag 000030L4 slot 44
>   chio: /dev/ch0: CHIOMOVE: Device not configured
>   #
>   # tail -6 /var/log/messages
>   Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): MOVE MEDIUM. CDB: a5 0 0 0 0 2 4 15 0 0 0 0 
>   Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): CAM Status: SCSI Status Error
>   Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): SCSI Status: Check Condition
>   Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): ILLEGAL REQUEST asc:25,0
>   Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Logical unit not supported
>   Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Unretryable error

Typically a "Logical unit not supported" error means that that particular
LUN (in this case LUN 1) isn't supported/doesn't exist.  (Which would be
strange, given that it does probe.)

Could the changer be in autoloader mode?  That's the only thing I can think
of that would cause an error like that.  The only other explanation is that
they're misusing that error to say that it doesn't like the particular move
you're trying to do.

> Is there a way to determine whether this problem is with the device or
> with FreeBSD?  Note that I *can* move the tapes around using the juke
> box's web gui, so it's not a physical problem.
> 
> For reference:
> 
>   # grep 'at isp0' /var/run/dmesg.boot 
>   sa0 at isp0 bus 0 target 0 lun 0
>   ch0 at isp0 bus 0 target 0 lun 1

Ken
-- 
Kenneth Merry
ken@kdm.org
From dean at fragfest.com.au  Thu Oct 15 13:03:18 2009
From: dean at fragfest.com.au (Dean Hamstead)
Date: Thu Oct 15 13:03:26 2009
Subject: SSL/AES acceleration in FreeBSD ?
In-Reply-To: <4AD3728E.8010509@comcast.net>
References: <Pine.NEB.4.64.0910121554080.3170@otaku.freeshell.org>
	<4AD3728E.8010509@comcast.net>
Message-ID: <4AD71DD8.4030009@fragfest.com.au>



> You will may find that for any fairly modern dual-core CPU (even an 
> Athlon64 X2), the CPU will outperform pretty much all of the hardware 
> crypto-accelerator offerings, except for the most recent and high-end.  
> This is *especially* true when you are doing many small cryptographic 
> operations, which I assume Tor may be doing.  You'll still at least get 
> the benefit of offloading all of these operations from the CPU, freeing 
> it up to spend time on other tasks.

this website gives more details confirming this statement.

http://sslacceleration.info/64bit.shtml

Interestingly, GMP benchmarking puts the Athlon64 significantly ahead of 
the intel offerings (i7 being one of them) for complex math. Although 
one must consider that the compilers are different versions etc.

http://gmplib.org/gmpbench.html

Certainly, given the low cost of the amd64 chips. For a CPU bound task 
like SSL Acceleration, it would be interesting to see what the best bang 
for buck would be in a cluster.


Dean
From north_side_sox_fan at comcast.net  Sat Oct 17 01:52:28 2009
From: north_side_sox_fan at comcast.net (Bryan Cassidy)
Date: Sat Oct 17 01:52:35 2009
Subject: HP Photosmart C4180
Message-ID: <20091017143806.GB85318@.hsd1.tn.comcast.net.>

Anyone using this printer and have it working?

From walkerindarkness at gmail.com  Sat Oct 17 07:45:25 2009
From: walkerindarkness at gmail.com (jason henson)
Date: Sat Oct 17 07:45:31 2009
Subject: HP Photosmart C4180
In-Reply-To: <20091017143806.GB85318@.hsd1.tn.comcast.net.>
References: <20091017143806.GB85318@.hsd1.tn.comcast.net.>
Message-ID: <e7ef27990910170015o60ce3ebale87e21fb73558a03@mail.gmail.com>

I have a hp photosmart c3140, I think you can use the driver for generic hp,
plc or plc 3 I think.  I can check my freebsd machine later if you need
more.  I also used lpr, the built in system print spooler I think. On Sat,
Oct 17, 2009 at 10:38 AM, Bryan Cassidy <north_side_sox_fan@comcast.net>wrote:
>
> Anyone using this printer and have it working?
>
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org
> "
>
From north_side_sox_fan at comcast.net  Sat Oct 17 19:39:55 2009
From: north_side_sox_fan at comcast.net (Bryan Cassidy)
Date: Sat Oct 17 19:40:02 2009
Subject: HP Photosmart C4180
In-Reply-To: <e7ef27990910170015o60ce3ebale87e21fb73558a03@mail.gmail.com>
References: <20091017143806.GB85318@.hsd1.tn.comcast.net.>
	<e7ef27990910170015o60ce3ebale87e21fb73558a03@mail.gmail.com>
Message-ID: <20091018083846.GA65104@.hsd1.tn.comcast.net.>

Yes, please give me more info when you find the time. I tried setting it up
a while back but just got done building a new machine and wanted to give it
another go. I got a good deal on the all-in-one and would love to get it 
working. 

On Sat, Oct 17, 2009 at 03:15:25AM -0400, jason henson wrote:
> I have a hp photosmart c3140, I think you can use the driver for generic hp,
> plc or plc 3 I think.  I can check my freebsd machine later if you need
> more.  I also used lpr, the built in system print spooler I think. On Sat,
> Oct 17, 2009 at 10:38 AM, Bryan Cassidy <north_side_sox_fan@comcast.net>wrote:
> >
> > Anyone using this printer and have it working?
> >
> > _______________________________________________
> > freebsd-hardware@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org
> > "
> >
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"

From nox at jelal.kn-bremen.de  Sat Oct 17 21:34:46 2009
From: nox at jelal.kn-bremen.de (Juergen Lock)
Date: Sat Oct 17 21:34:53 2009
Subject: HP Photosmart C4180
In-Reply-To: <20091018083846.GA65104@.hsd1.tn.comcast.net.>
References: <20091017143806.GB85318@.hsd1.tn.comcast.net.>
	<e7ef27990910170015o60ce3ebale87e21fb73558a03@mail.gmail.com>
	<20091018083846.GA65104@.hsd1.tn.comcast.net.>
Message-ID: <20091017203156.GA87576@triton8.kn-bremen.de>

On Sun, Oct 18, 2009 at 03:38:46AM -0500, Bryan Cassidy wrote:
> Yes, please give me more info when you find the time. I tried setting it up
> a while back but just got done building a new machine and wanted to give it
> another go. I got a good deal on the all-in-one and would love to get it 
> working. 
> 
> On Sat, Oct 17, 2009 at 03:15:25AM -0400, jason henson wrote:
> > I have a hp photosmart c3140, I think you can use the driver for generic hp,
> > plc or plc 3 I think.  I can check my freebsd machine later if you need
> > more.  I also used lpr, the built in system print spooler I think. On Sat,
> > Oct 17, 2009 at 10:38 AM, Bryan Cassidy <north_side_sox_fan@comcast.net>wrote:

I don't know if that particular one speaks plc, but if you want to
be able to scan too (and have X installed on the box for the gui) then
look at /usr/ports/print/hplip3 - looks like it supports your all-in-one,
including printing (using cups), scanning (using sane) and status info:
	http://hplipopensource.com/hplip-web/models/photosmart/photosmart_c4100_series.html

 HTH,
	Juergen

PS: I think all I had to do when testing an earlier update of that port
was setting up ugen* permissions for my user in /etc/devfs.rules (there's
some info in /usr/ports/print/hplip3/files/pkg-message.in - things are
a little different with the new usb stack in 8 and -current tho) and
then running hp-setup as root (so it can access the cups config),
selecting the right ppd file for the printer.  (seems to be
hp-photosmart_c4100_series-hpijs.ppd.gz for yours.)

PPS: your mailer sends broken Message-ID headers. :)
From walkerindarkness at gmail.com  Sun Oct 18 06:01:06 2009
From: walkerindarkness at gmail.com (jason henson)
Date: Sun Oct 18 06:01:13 2009
Subject: HP Photosmart C4180
In-Reply-To: <20091017203156.GA87576@triton8.kn-bremen.de>
References: <20091017143806.GB85318@.hsd1.tn.comcast.net.>
	<e7ef27990910170015o60ce3ebale87e21fb73558a03@mail.gmail.com>
	<20091018083846.GA65104@.hsd1.tn.comcast.net.>
	<20091017203156.GA87576@triton8.kn-bremen.de>
Message-ID: <e7ef27990910172301k667b40ccj3c861adcb98c5656@mail.gmail.com>

On Sat, Oct 17, 2009 at 4:31 PM, Juergen Lock <nox@jelal.kn-bremen.de>wrote:

> On Sun, Oct 18, 2009 at 03:38:46AM -0500, Bryan Cassidy wrote:
> > Yes, please give me more info when you find the time. I tried setting it
> up
> > a while back but just got done building a new machine and wanted to give
> it
> > another go. I got a good deal on the all-in-one and would love to get it
> > working.
> >
> > On Sat, Oct 17, 2009 at 03:15:25AM -0400, jason henson wrote:
> > > I have a hp photosmart c3140, I think you can use the driver for
> generic hp,
> > > plc or plc 3 I think.  I can check my freebsd machine later if you need
> > > more.  I also used lpr, the built in system print spooler I think. On
> Sat,
> > > Oct 17, 2009 at 10:38 AM, Bryan Cassidy <
> north_side_sox_fan@comcast.net>wrote:
>
> I don't know if that particular one speaks plc, but if you want to
> be able to scan too (and have X installed on the box for the gui) then
> look at /usr/ports/print/hplip3 - looks like it supports your all-in-one,
> including printing (using cups), scanning (using sane) and status info:
>
> http://hplipopensource.com/hplip-web/models/photosmart/photosmart_c4100_series.html
>
>  HTH,
>        Juergen
>
> PS: I think all I had to do when testing an earlier update of that port
> was setting up ugen* permissions for my user in /etc/devfs.rules (there's
> some info in /usr/ports/print/hplip3/files/pkg-message.in - things are
> a little different with the new usb stack in 8 and -current tho) and
> then running hp-setup as root (so it can access the cups config),
> selecting the right ppd file for the printer.  (seems to be
> hp-photosmart_c4100_series-hpijs.ppd.gz for yours.)
>
> PPS: your mailer sends broken Message-ID headers. :)
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org
> "
>
I didn't like the hplip3 port, it ws the only thing that used qt on my
machince.  I don't remember if I got hplip3 to work, not meaning qt was a
problem.

for lpd with the ghostscript drivers installed you will likely need to
correct the stair case effect via the ifhp file and change permissions on it
to print. Configure lpd to run, check the handbook.


in /usr/etc/printcap i have
lp:hp:photosmart:c3140:\
     :sh:sd=/var/spool/lpd/hp:\
     :lp=/dev/unlpt0:\
     :if=/usr/local/libexec/ifhp:
From korvus at comcast.net  Tue Oct 20 18:48:45 2009
From: korvus at comcast.net (Steve Polyack)
Date: Tue Oct 20 18:48:52 2009
Subject: FreeBSD and SATA Port Multipliers
Message-ID: <4ADE060C.5050605@comcast.net>

I have a system running FreeBSD 8.0-RC1 that contains 3x Sil3124 PCI-E 
SATA controller cards.  Each card has 3x Sil3726 Port Multipliers 
attached (5 slots per SATA PM).  The problem is that the disks are often 
not all detected by FreeBSD, even though the controller Option ROMs list 
all of the installed physical disks.  Which drive(s) are not detected 
seems to vary with each boot.  All of the port multipliers are detected 
every boot, it's just the drives which aren't getting probed.

I've tried the following patch, 
http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/129784 , which may have 
helped - it picks up 6-8 out of 9 disks, but obviously that's not 
ideal.  The motherboard BIOS version is current, as is the firmware for 
the SATA controllers.

Does anyone have any ideas or other patches that I may try?


Thanks,
Steve Polyack

From korvus at comcast.net  Tue Oct 20 20:53:51 2009
From: korvus at comcast.net (Steve Polyack)
Date: Tue Oct 20 20:53:59 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4ADE060C.5050605@comcast.net>
References: <4ADE060C.5050605@comcast.net>
Message-ID: <4ADE235D.6050208@comcast.net>

Steve Polyack wrote:
> I have a system running FreeBSD 8.0-RC1 that contains 3x Sil3124 PCI-E 
> SATA controller cards.  Each card has 3x Sil3726 Port Multipliers 
> attached (5 slots per SATA PM).  The problem is that the disks are 
> often not all detected by FreeBSD, even though the controller Option 
> ROMs list all of the installed physical disks.  Which drive(s) are not 
> detected seems to vary with each boot.  All of the port multipliers 
> are detected every boot, it's just the drives which aren't getting 
> probed.

This was mostly fixed by loading the siis(4) module at boot.  However, 
if I attach 5 drives to a port multiplier board and reboot, only 4 of 
the drives attached to that port multiplier are detected.

 From dmesg:
siisch4: Timeout on slot 25
siisch4: siis_timeout is 00000000 ss 02000000 rs 02000000 es 00000000 
sts 80192000 serr 00000000
(aprobe0:siisch4:0:1:0): SIGNATURE: 0000
(aprobe0:siisch4:0:2:0): SIGNATURE: 0000
(aprobe0:siisch4:0:3:0): SIGNATURE: 0000
(aprobe0:siisch4:0:4:0): SIGNATURE: 0000
ada0 at siisch4 bus 0 target 1 lun 0
ada0: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada0: 300.000MB/s transfers
ada0: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled
ada1 at siisch4 bus 0 target 2 lun 0
ada1: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada1: 300.000MB/s transfers
ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada1: Native Command Queueing enabled
ada2 at siisch4 bus 0 target 3 lun 0
ada2: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada2: 300.000MB/s transfers
ada2: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada2: Native Command Queueing enabled
ada3 at siisch4 bus 0 target 4 lun 0
ada3: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada3: 300.000MB/s transfers
ada3: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada3: Native Command Queueing enabled


The disk at siisch4 bus 0 target 0 lun 0 is what's missing - it looks 
like there's some kind of timeout during the detection. A 'camcontrol 
rescan all' does not help.  In fact, the camcontrol rescan appears to 
lose all of the SATA drives attached to port-multipliers with a similar 
timeout message:

siisch4: Timeout on slot 17
siisch4: siis_timeout is 00040000 ss 00020000 rs 00020000 es 00000000 
sts 80112000 serr 00000000
(ada0:siisch4:0:1:0): lost device
(ada0:siisch4:0:1:0): removing device entry
siisch4: Timeout on slot 19
siisch4: siis_timeout is 00040000 ss 00080000 rs 00080000 es 00000000 
sts 80132000 serr 00000000
siisch4: Timeout on slot 20
siisch4: siis_timeout is 00040000 ss 00100000 rs 00100000 es 00000000 
sts 80142000 serr 00000000
(ada1:siisch4:0:2:0): lost device
(ada1:siisch4:0:2:0): removing device entry
siisch4: Timeout on slot 21
siisch4: siis_timeout is 00040000 ss 00200000 rs 00200000 es 00000000 
sts 80152000 serr 00000000
siisch4: Timeout on slot 22
siisch4: siis_timeout is 00040000 ss 00400000 rs 00400000 es 00000000 
sts 80162000 serr 00000000
(ada2:siisch4:0:3:0): lost device
(ada2:siisch4:0:3:0): removing device entry

I can provide more info on request.

From mav at FreeBSD.org  Tue Oct 20 22:51:55 2009
From: mav at FreeBSD.org (Alexander Motin)
Date: Tue Oct 20 22:52:01 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <1256075840.00175367.1256064602@10.7.7.3>
References: <1256075840.00175367.1256064602@10.7.7.3>
Message-ID: <4ADE3F06.9050508@FreeBSD.org>

Steve Polyack wrote:
> I have a system running FreeBSD 8.0-RC1 that contains 3x Sil3124 PCI-E
> SATA controller cards.  Each card has 3x Sil3726 Port Multipliers
> attached (5 slots per SATA PM).  The problem is that the disks are often
> not all detected by FreeBSD, even though the controller Option ROMs list
> all of the installed physical disks.  Which drive(s) are not detected
> seems to vary with each boot.  All of the port multipliers are detected
> every boot, it's just the drives which aren't getting probed.
> 
> I've tried the following patch,
> http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/129784 , which may have
> helped - it picks up 6-8 out of 9 disks, but obviously that's not
> ideal.  The motherboard BIOS version is current, as is the firmware for
> the SATA controllers.
> 
> Does anyone have any ideas or other patches that I may try?

Have you tried new CAM-based ATA subsystem present in 8.x by siis(4)
driver? Work is still in progress there, but it should work with port
multipliers much better then previous implementation.

-- 
Alexander Motin
From grarpamp at gmail.com  Wed Oct 21 06:03:37 2009
From: grarpamp at gmail.com (grarpamp)
Date: Wed Oct 21 06:03:50 2009
Subject: FreeBSD and SATA Port Multipliers
Message-ID: <d2e731a10910202303n613d0a94gc3082a6b74729a5a@mail.gmail.com>

In the somewhat related dept...

The SiI3124 and SiI3726 seem to be *really*
popular chipsets for low cost JBOD setups
so I'm sure any work done towards this
will be a win. The only other chip I see
a lot of is the Marvell 88SX6041 and 88SX6081.
Any others, particularly of the eight port
generic card variety or other multipliers???
I'm not sure if JMicron ever got into the 4/8 port
game.

A somewhat related diversion:
http://blog.backblaze.com/2009/09/01/petabytes-on-a-budget-how-to-build-cheap-cloud-storage/

And without the fab... you'd be amazed what a
bicycle inner tube, scrap pc case lids, tin snips,
hammer, anvil, drill bit, and a pop rivet tool will yield ;-)
From dean at fragfest.com.au  Wed Oct 21 06:12:06 2009
From: dean at fragfest.com.au (Dean Hamstead)
Date: Wed Oct 21 06:12:13 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <d2e731a10910202303n613d0a94gc3082a6b74729a5a@mail.gmail.com>
References: <d2e731a10910202303n613d0a94gc3082a6b74729a5a@mail.gmail.com>
Message-ID: <4ADEA668.9000401@fragfest.com.au>

FWIW you can buy the case and accessories for a very reasonable cost.

just click further through the blog and they link the manufacturer.

its extremely cheap 90tb of zfs....


Dean

grarpamp wrote:
> In the somewhat related dept...
> 
> The SiI3124 and SiI3726 seem to be *really*
> popular chipsets for low cost JBOD setups
> so I'm sure any work done towards this
> will be a win. The only other chip I see
> a lot of is the Marvell 88SX6041 and 88SX6081.
> Any others, particularly of the eight port
> generic card variety or other multipliers???
> I'm not sure if JMicron ever got into the 4/8 port
> game.
> 
> A somewhat related diversion:
> http://blog.backblaze.com/2009/09/01/petabytes-on-a-budget-how-to-build-cheap-cloud-storage/
> 
> And without the fab... you'd be amazed what a
> bicycle inner tube, scrap pc case lids, tin snips,
> hammer, anvil, drill bit, and a pop rivet tool will yield ;-)
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"
> 

-- 
http://fragfest.com.au
From lists at c0mplx.org  Wed Oct 21 06:52:34 2009
From: lists at c0mplx.org (Kurt Jaeger)
Date: Wed Oct 21 06:52:46 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <d2e731a10910202303n613d0a94gc3082a6b74729a5a@mail.gmail.com>
References: <d2e731a10910202303n613d0a94gc3082a6b74729a5a@mail.gmail.com>
Message-ID: <20091021065232.GD93084@home.opsec.eu>

Hello,

> A somewhat related diversion:
> http://blog.backblaze.com/2009/09/01/petabytes-on-a-budget-how-to-build-cheap-cloud-storage/

And the quite reasonable Sun answer to that:

http://www.c0t0d0s0.org/archives/5899-Some-perspective-to-this-DIY-storage-server-mentioned-at-Storagemojo.html

http://www.c0t0d0s0.org/archives/5906-Thoughts-about-this-DIY-Thumper-and-storage-in-general.html

-- 
pi@opsec.eu            +49 171 3101372                        11 years to go !
From korvus at comcast.net  Wed Oct 21 17:28:48 2009
From: korvus at comcast.net (Steve Polyack)
Date: Wed Oct 21 17:29:00 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4ADE060C.5050605@comcast.net>
References: <4ADE060C.5050605@comcast.net>
Message-ID: <4ADF44CE.3030605@comcast.net>

Alexander Motin wrote:
>  Have you tried new CAM-based ATA subsystem present in 8.x by siis(4)
>  driver? Work is still in progress there, but it should work with port
>  multipliers much better then previous implementation.

Indeed, the siis(4) driver works MUCH better.  However, it's still not 
always detecting every drive if I fill a port multiplier with 5/5 
drives.  Sometimes it boots up with 4, sometimes with 5.

Snippet from the dmesg in my other reply:
siisch4: Timeout on slot 25
siisch4: siis_timeout is 00000000 ss 02000000 rs 02000000 es 00000000 
sts 80192000 serr 00000000
(aprobe0:siisch4:0:1:0): SIGNATURE: 0000
(aprobe0:siisch4:0:2:0): SIGNATURE: 0000
(aprobe0:siisch4:0:3:0): SIGNATURE: 0000
(aprobe0:siisch4:0:4:0): SIGNATURE: 0000
ada0 at siisch4 bus 0 target 1 lun 0
ada0: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada0: 300.000MB/s transfers
ada0: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled

siisch4 bus 0 target 0 lun 0 is missing here, due to some kind of 
timeout.  The drives are fine and the missing device does not follow a 
specific physical drive.  Lastly, using camcontrol to rescan port 
multipliers and attached drives only leads to failure.  Rescanning 
everythign simply loses all but one drive attached to each port multiplier.


From mav at FreeBSD.org  Wed Oct 21 20:58:06 2009
From: mav at FreeBSD.org (Alexander Motin)
Date: Wed Oct 21 20:58:19 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4ADF44CE.3030605@comcast.net>
References: <4ADE060C.5050605@comcast.net> <4ADF44CE.3030605@comcast.net>
Message-ID: <4ADF75DA.8040707@FreeBSD.org>

Steve Polyack wrote:
> Alexander Motin wrote:
>>  Have you tried new CAM-based ATA subsystem present in 8.x by siis(4)
>>  driver? Work is still in progress there, but it should work with port
>>  multipliers much better then previous implementation.
> 
> Indeed, the siis(4) driver works MUCH better.  However, it's still not
> always detecting every drive if I fill a port multiplier with 5/5
> drives.  Sometimes it boots up with 4, sometimes with 5.
> 
> Snippet from the dmesg in my other reply:
> siisch4: Timeout on slot 25
> siisch4: siis_timeout is 00000000 ss 02000000 rs 02000000 es 00000000
> sts 80192000 serr 00000000
> (aprobe0:siisch4:0:1:0): SIGNATURE: 0000
> (aprobe0:siisch4:0:2:0): SIGNATURE: 0000
> (aprobe0:siisch4:0:3:0): SIGNATURE: 0000
> (aprobe0:siisch4:0:4:0): SIGNATURE: 0000
> ada0 at siisch4 bus 0 target 1 lun 0
> ada0: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
> ada0: 300.000MB/s transfers
> ada0: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
> ada0: Native Command Queueing enabled
> 
> siisch4 bus 0 target 0 lun 0 is missing here, due to some kind of
> timeout.  The drives are fine and the missing device does not follow a
> specific physical drive.  Lastly, using camcontrol to rescan port
> multipliers and attached drives only leads to failure.  Rescanning
> everythign simply loses all but one drive attached to each port multiplier.

As I have said, infrastructure is not finished yet, especially part of
recovery from timeout state. That's why probably rescan does not solve
situation. From other side, this timeout may be called by some driver
issue, as it looks too repeatable.

If your conditions permit, you can try to upgrade to recent HEAD to look
how will it go with newer code. I am periodically merging my work there
from Perforce. Also I am going to generate new test patch for HEAD,
which includes reworked PMP support, tomorrow. I will put it to
http://people.freebsd.org/~mav/ as usual, so you can test it.

-- 
Alexander Motin
From mav at FreeBSD.org  Thu Oct 22 09:55:36 2009
From: mav at FreeBSD.org (Alexander Motin)
Date: Thu Oct 22 09:55:43 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4ADF75DA.8040707@FreeBSD.org>
References: <4ADE060C.5050605@comcast.net> <4ADF44CE.3030605@comcast.net>
	<4ADF75DA.8040707@FreeBSD.org>
Message-ID: <4AE02C14.6060709@FreeBSD.org>

Alexander Motin wrote:
> If your conditions permit, you can try to upgrade to recent HEAD to look
> how will it go with newer code. I am periodically merging my work there
> from Perforce. Also I am going to generate new test patch for HEAD,
> which includes reworked PMP support, tomorrow.

You can try this patch against today's HEAD:
http://people.freebsd.org/~mav/cam-ata.20091022.patch

-- 
Alexander Motin
From korvus at comcast.net  Thu Oct 22 15:01:37 2009
From: korvus at comcast.net (Steve Polyack)
Date: Thu Oct 22 15:01:49 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4AE04F73.1050703@comcast.net>
References: <4AE04F73.1050703@comcast.net>
Message-ID: <4AE073CF.40500@comcast.net>

Alexander Motin wrote:
>> If your conditions permit, you can try to upgrade to recent HEAD to look
>> how will it go with newer code. I am periodically merging my work there
>> from Perforce. Also I am going to generate new test patch for HEAD,
>> which includes reworked PMP support, tomorrow.
>>     
>
> You can try this patch against today's HEAD:
> http://people.freebsd.org/~mav/cam-ata.20091022.patch
>
>   
I tried the patch this morning against a fresh checkout of HEAD.  
Immediately after boot only one device per PM was detected (I have two 
hooked up at the moment, 5 drives on one, 1 on the other).  However, 
about two minutes later all of the drives showed up!

camcontrol also rescans the entire bus *very* quickly now, and discovers 
all changes (new/missing disks and port multipliers).

Here's some verbose info from /var/log/messages immediately after boot:
Oct 22 10:52:03 lovepod kernel: siisch0: Timeout on slot 27
Oct 22 10:52:03 lovepod kernel: siisch0: siis_timeout is 00000000 ss 
08000000 rs 08000000 es 00000000 sts 801b2000 serr 00000000
Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset...
Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:52:03 lovepod kernel: siisch0: hardware reset ...
Oct 22 10:52:03 lovepod kernel: siisch0: SATA connect timeout 
status=00000001
Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset done: phy reset 
found no device
Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Command timed out
Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): error 5
Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Retries Exhausted
Oct 22 10:52:03 lovepod kernel: siisch0: DISCONNECT requested
Oct 22 10:52:05 lovepod kernel: siisch0: CONNECT requested
Oct 22 10:52:05 lovepod kernel: siisch0: SIIS reset...
Oct 22 10:52:05 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:52:05 lovepod kernel: siisch0: hardware reset ...
Oct 22 10:52:05 lovepod kernel: siisch0: SATA connect time=0ms 
status=00000123
Oct 22 10:52:05 lovepod kernel: siisch0: ready wait time=0ms
Oct 22 10:52:05 lovepod kernel: siisch0: SIIS reset done: devices=00000001
Oct 22 10:52:33 lovepod kernel: siisch0: Timeout on slot 28
Oct 22 10:52:33 lovepod kernel: siisch0: siis_timeout is 00000000 ss 
10000000 rs 10000000 es 00000000 sts 801c2000 serr 00000000
Oct 22 10:52:33 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:52:33 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:52:33 lovepod kernel: siisch0: SIIS reset...
Oct 22 10:52:33 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:52:33 lovepod kernel: siisch0: hardware reset ...
Oct 22 10:52:33 lovepod kernel: siisch0: SATA connect timeout 
status=00000001
Oct 22 10:52:33 lovepod kernel: siisch0: SIIS reset done: phy reset 
found no device
Oct 22 10:52:33 lovepod kernel: (aprobe0:siisch0:0:2:0): Command timed out
Oct 22 10:52:33 lovepod kernel: (aprobe0:siisch0:0:2:0): error 5
Oct 22 10:52:33 lovepod kernel: (aprobe0:siisch0:0:2:0): Retries Exhausted
Oct 22 10:52:33 lovepod kernel: siisch0: DISCONNECT requested
Oct 22 10:52:35 lovepod kernel: siisch0: CONNECT requested
Oct 22 10:52:35 lovepod kernel: siisch0: SIIS reset...
Oct 22 10:52:35 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:52:35 lovepod kernel: siisch0: hardware reset ...
Oct 22 10:52:35 lovepod kernel: siisch0: SATA connect time=0ms 
status=00000123
Oct 22 10:52:35 lovepod kernel: siisch0: ready wait time=0ms
Oct 22 10:52:35 lovepod kernel: siisch0: SIIS reset done: devices=00000001
Oct 22 10:53:03 lovepod kernel: siisch0: Timeout on slot 29
Oct 22 10:53:03 lovepod kernel: siisch0: siis_timeout is 00000000 ss 
20000000 rs 20000000 es 00000000 sts 801d2000 serr 00000000
Oct 22 10:53:03 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:53:03 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:53:03 lovepod kernel: siisch0: SIIS reset...
Oct 22 10:53:03 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:53:03 lovepod kernel: siisch0: hardware reset ...
Oct 22 10:53:03 lovepod kernel: siisch0: SATA connect timeout 
status=00000001
Oct 22 10:53:03 lovepod kernel: siisch0: SIIS reset done: phy reset 
found no device
Oct 22 10:53:03 lovepod kernel: (aprobe0:siisch0:0:3:0): Command timed out
Oct 22 10:53:03 lovepod kernel: (aprobe0:siisch0:0:3:0): error 5
Oct 22 10:53:03 lovepod kernel: (aprobe0:siisch0:0:3:0): Retries Exhausted
Oct 22 10:53:03 lovepod kernel: siisch0: DISCONNECT requested
Oct 22 10:53:05 lovepod kernel: siisch0: CONNECT requested
Oct 22 10:53:05 lovepod kernel: siisch0: SIIS reset...
Oct 22 10:53:05 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:53:05 lovepod kernel: siisch0: hardware reset ...
Oct 22 10:53:05 lovepod kernel: siisch0: SATA connect time=0ms 
status=00000123
Oct 22 10:53:05 lovepod kernel: siisch0: ready wait time=0ms
Oct 22 10:53:05 lovepod kernel: siisch0: SIIS reset done: devices=00000001
Oct 22 10:53:34 lovepod kernel: siisch0: Timeout on slot 30
Oct 22 10:53:34 lovepod kernel: siisch0: siis_timeout is 00000000 ss 
40000000 rs 40000000 es 00000000 sts 801e2000 serr 00000000
Oct 22 10:53:34 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:53:34 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:53:34 lovepod kernel: siisch0: SIIS reset...
Oct 22 10:53:34 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:53:34 lovepod kernel: siisch0: hardware reset ...
Oct 22 10:53:34 lovepod kernel: siisch0: SATA connect timeout 
status=00000001
Oct 22 10:53:34 lovepod kernel: siisch0: SIIS reset done: phy reset 
found no device
Oct 22 10:53:34 lovepod kernel: (aprobe0:siisch0:0:4:0): Command timed out
Oct 22 10:53:34 lovepod kernel: (aprobe0:siisch0:0:4:0): error 5
Oct 22 10:53:34 lovepod kernel: (aprobe0:siisch0:0:4:0): Retries Exhausted
Oct 22 10:53:34 lovepod kernel: siisch0: DISCONNECT requested
Oct 22 10:53:36 lovepod kernel: siisch0: CONNECT requested
Oct 22 10:53:36 lovepod kernel: siisch0: SIIS reset...
Oct 22 10:53:36 lovepod kernel: siisch0: ready wait time=1ms
Oct 22 10:53:36 lovepod kernel: siisch0: hardware reset ...
Oct 22 10:53:36 lovepod kernel: siisch0: SATA connect time=0ms 
status=00000123
Oct 22 10:53:36 lovepod kernel: siisch0: ready wait time=0ms
Oct 22 10:53:36 lovepod kernel: siisch0: SIIS reset done: devices=00000001
Oct 22 10:53:36 lovepod kernel: PMP freeze: 0
Oct 22 10:53:36 lovepod kernel: PMP freeze: 1
Oct 22 10:53:36 lovepod kernel: PMP freeze: 2
Oct 22 10:53:36 lovepod kernel: PMP freeze: 3
Oct 22 10:53:36 lovepod kernel: PMP freeze: 4
Oct 22 10:53:51 lovepod kernel: PM ports: 5
Oct 22 10:53:51 lovepod kernel: PM RESET 0
Oct 22 10:53:51 lovepod kernel: PM RESET 1
Oct 22 10:53:51 lovepod kernel: PM RESET 2
Oct 22 10:53:51 lovepod kernel: siisch0: SNTF 0x0000
Oct 22 10:53:51 lovepod kernel: siisch0: SNTF 0x0000
Oct 22 10:53:51 lovepod kernel: PM RESET 3
Oct 22 10:53:51 lovepod kernel: PM RESET 4
Oct 22 10:53:51 lovepod kernel: siisch0: SNTF 0x0000
Oct 22 10:53:51 lovepod kernel: siisch0: SNTF 0x0000
Oct 22 10:53:51 lovepod kernel: PM reset done
Oct 22 10:53:51 lovepod kernel: PM connect done
Oct 22 10:53:51 lovepod kernel: PM status: 0 - 00000123
Oct 22 10:53:51 lovepod kernel: PM status: 1 - 00000123
Oct 22 10:53:51 lovepod kernel: PM status: 2 - 00000123
Oct 22 10:53:51 lovepod kernel: PM status: 3 - 00000123
Oct 22 10:53:51 lovepod kernel: PM status: 4 - 00000123
Oct 22 10:53:51 lovepod kernel: PMP release: 0
Oct 22 10:53:51 lovepod kernel: (aprobe0:siisch0:0:0:0): SIGNATURE: 0000
Oct 22 10:53:51 lovepod kernel: pass4 at siisch0 bus 0 scbus0 target 0 lun 0
Oct 22 10:53:51 lovepod kernel: pass4: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: pass4: Serial Number 9VS2FJJR
Oct 22 10:53:51 lovepod kernel: pass4: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada2 at siisch0 bus 0 scbus0 target 0 
lun 0GEOM: new disk ada2
Oct 22 10:53:51 lovepod kernel: ada2:
Oct 22 10:53:51 lovepod kernel: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x 
device
Oct 22 10:53:51 lovepod kernel: ada2: Serial Number 9VS2FJJR
Oct 22 10:53:51 lovepod kernel: ada2: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada2: 1430799MB (2930277168 512 byte 
sectors: 16H 63S/T 16383C)
Oct 22 10:53:51 lovepod kernel: ada2: Native Command Queueing enabled
Oct 22 10:53:51 lovepod kernel: PMP release: 1
Oct 22 10:53:51 lovepod kernel: (aprobe0:siisch0:0:1:0): SIGNATURE: 0000
Oct 22 10:53:51 lovepod kernel: pass5 at siisch0 bus 0 scbus0 target 1 lun 0
Oct 22 10:53:51 lovepod kernel: pass5: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: pass5: Serial Number 9VS2DYEQ
Oct 22 10:53:51 lovepod kernel: pass5: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada3 at siisch0 bus 0 scbus0 target 1 lun 0
Oct 22 10:53:51 lovepod kernel: ada3: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: ada3: Serial Number 9VS2DYEQ
Oct 22 10:53:51 lovepod kernel: ada3: 300.000MB/s transfers
Oct 22 10:53:36 lovepod kernel: PMP freeze: 4
Oct 22 10:53:51 lovepod kernel: PM ports: 5
Oct 22 10:53:51 lovepod kernel: PM RESET 0
Oct 22 10:53:51 lovepod kernel: PM RESET 1
Oct 22 10:53:51 lovepod kernel: PM RESET 2
Oct 22 10:53:51 lovepod kernel: siisch0: SNTF 0x0000
Oct 22 10:53:51 lovepod kernel: siisch0: SNTF 0x0000
Oct 22 10:53:51 lovepod kernel: PM RESET 3
Oct 22 10:53:51 lovepod kernel: PM RESET 4
Oct 22 10:53:51 lovepod kernel: siisch0: SNTF 0x0000
Oct 22 10:53:51 lovepod kernel: siisch0: SNTF 0x0000
Oct 22 10:53:51 lovepod kernel: PM reset done
Oct 22 10:53:51 lovepod kernel: PM connect done
Oct 22 10:53:51 lovepod kernel: PM status: 0 - 00000123
Oct 22 10:53:51 lovepod kernel: PM status: 1 - 00000123
Oct 22 10:53:51 lovepod kernel: PM status: 2 - 00000123
Oct 22 10:53:51 lovepod kernel: PM status: 3 - 00000123
Oct 22 10:53:51 lovepod kernel: PM status: 4 - 00000123
Oct 22 10:53:51 lovepod kernel: PMP release: 0
Oct 22 10:53:51 lovepod kernel: (aprobe0:siisch0:0:0:0): SIGNATURE: 0000
Oct 22 10:53:51 lovepod kernel: pass4 at siisch0 bus 0 scbus0 target 0 lun 0
Oct 22 10:53:51 lovepod kernel: pass4: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: pass4: Serial Number 9VS2FJJR
Oct 22 10:53:51 lovepod kernel: pass4: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada2 at siisch0 bus 0 scbus0 target 0 
lun 0GEOM: new disk ada2
Oct 22 10:53:51 lovepod kernel: ada2:
Oct 22 10:53:51 lovepod kernel: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x 
device
Oct 22 10:53:51 lovepod kernel: ada2: Serial Number 9VS2FJJR
Oct 22 10:53:51 lovepod kernel: ada2: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada2: 1430799MB (2930277168 512 byte 
sectors: 16H 63S/T 16383C)
Oct 22 10:53:51 lovepod kernel: ada2: Native Command Queueing enabled
Oct 22 10:53:51 lovepod kernel: PMP release: 1
Oct 22 10:53:51 lovepod kernel: (aprobe0:siisch0:0:1:0): SIGNATURE: 0000
Oct 22 10:53:51 lovepod kernel: pass5 at siisch0 bus 0 scbus0 target 1 lun 0
Oct 22 10:53:51 lovepod kernel: pass5: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: pass5: Serial Number 9VS2DYEQ
Oct 22 10:53:51 lovepod kernel: pass5: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada3 at siisch0 bus 0 scbus0 target 1 lun 0
Oct 22 10:53:51 lovepod kernel: ada3: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: ada3: Serial Number 9VS2DYEQ
Oct 22 10:53:51 lovepod kernel: ada3: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada3: 1430799MB (2930277168 512 byte 
sectors: 16H 63S/T 16383C)
Oct 22 10:53:51 lovepod kernel: ada3: Native Command Queueing enabled
Oct 22 10:53:51 lovepod kernel: PMP release: 2
Oct 22 10:53:51 lovepod kernel: (aprobe0:siisch0:0:2:0): SIGNATURE: 0000
Oct 22 10:53:51 lovepod kernel: pass6 at siisch0 bus 0 scbus0 target 2 lun 0
Oct 22 10:53:51 lovepod kernel: pass6: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: pass6: Serial Number 9VS2FJQ0
Oct 22 10:53:51 lovepod kernel: pass6: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada4 at siisch0 bus 0 scbus0 target 2 lun 0
Oct 22 10:53:51 lovepod kernel: ada4: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: ada4: Serial Number 9VS2FJQ0
Oct 22 10:53:51 lovepod kernel: ada4: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada4: 1430799MB (2930277168 512 byte 
sectors: 16H 63S/T 16383C)
Oct 22 10:53:51 lovepod kernel: ada4: Native Command Queueing enabled
Oct 22 10:53:51 lovepod kernel: PMP release: 3
Oct 22 10:53:51 lovepod kernel: (aprobe0:siisch0:0:3:0): SIGNATURE: 0000
Oct 22 10:53:51 lovepod kernel: pass7 at siisch0 bus 0 scbus0 target 3 lun 0
Oct 22 10:53:51 lovepod kernel: pass7: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: pass7: Serial Number 9VS2FG9C
Oct 22 10:53:51 lovepod kernel: pass7: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada5 at siisch0 bus 0 scbus0 target 3 lun 0
Oct 22 10:53:51 lovepod kernel: ada5: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: ada5: Serial Number 9VS2FG9C
Oct 22 10:53:51 lovepod kernel: ada5: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada5: 1430799MB (2930277168 512 byte 
sectors: 16H 63S/T 16383C)
Oct 22 10:53:51 lovepod kernel: ada5: Native Command Queueing enabled
Oct 22 10:53:51 lovepod kernel: PMP release: 4
Oct 22 10:53:51 lovepod kernel: (aprobe0:siisch0:0:4:0): SIGNATURE: 0000
Oct 22 10:53:51 lovepod kernel: pass8 at siisch0 bus 0 scbus0 target 4 lun 0
Oct 22 10:53:51 lovepod kernel: pass8: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: pass8: Serial Number 9VS2DH15
Oct 22 10:53:51 lovepod kernel: pass8: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada6 at siisch0 bus 0 scbus0 target 4 lun 0
Oct 22 10:53:51 lovepod kernel: ada6: <ST31500341AS CC1H> ATA/ATAPI-8 
SATA 2.x device
Oct 22 10:53:51 lovepod kernel: ada6: Serial Number 9VS2DH15
Oct 22 10:53:51 lovepod kernel: ada6: 300.000MB/s transfers
Oct 22 10:53:51 lovepod kernel: ada6: 1430799MB (2930277168 512 byte 
sectors: 16H 63S/T 16383C)
Oct 22 10:53:51 lovepod kernel: ada6: Native Command Queueing enabled
Oct 22 10:53:51 lovepod kernel: GEOM: new disk ada3
Oct 22 10:53:51 lovepod kernel: GEOM: new disk ada4
Oct 22 10:53:51 lovepod kernel: GEOM: new disk ada5
Oct 22 10:53:51 lovepod kernel: GEOM: new disk ada6

From mav at FreeBSD.org  Thu Oct 22 17:43:56 2009
From: mav at FreeBSD.org (Alexander Motin)
Date: Thu Oct 22 17:44:05 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4AE073CF.40500@comcast.net>
References: <4AE04F73.1050703@comcast.net> <4AE073CF.40500@comcast.net>
Message-ID: <4AE099D8.5060103@FreeBSD.org>

Steve Polyack wrote:
> Alexander Motin wrote:
>>> If your conditions permit, you can try to upgrade to recent HEAD to look
>>> how will it go with newer code. I am periodically merging my work there
>>> from Perforce. Also I am going to generate new test patch for HEAD,
>>> which includes reworked PMP support, tomorrow.
>>
>> You can try this patch against today's HEAD:
>> http://people.freebsd.org/~mav/cam-ata.20091022.patch
>>   
> I tried the patch this morning against a fresh checkout of HEAD. 
> Immediately after boot only one device per PM was detected (I have two
> hooked up at the moment, 5 drives on one, 1 on the other).  However,
> about two minutes later all of the drives showed up!
> 
> camcontrol also rescans the entire bus *very* quickly now, and discovers
> all changes (new/missing disks and port multipliers).
> 
> Here's some verbose info from /var/log/messages immediately after boot:
> Oct 22 10:52:03 lovepod kernel: siisch0: Timeout on slot 27
> Oct 22 10:52:03 lovepod kernel: siisch0: siis_timeout is 00000000 ss
> 08000000 rs 08000000 es 00000000 sts 801b2000 serr 00000000
> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
> Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset...
> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
> Oct 22 10:52:03 lovepod kernel: siisch0: hardware reset ...
> Oct 22 10:52:03 lovepod kernel: siisch0: SATA connect timeout
> status=00000001
> Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset done: phy reset
> found no device
> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Command timed out
> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): error 5
> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Retries Exhausted
> Oct 22 10:52:03 lovepod kernel: siisch0: DISCONNECT requested

What was before that? Can you send me full verbose boot messages?

-- 
Alexander Motin
From lehmann at ans-netz.de  Thu Oct 22 20:06:19 2009
From: lehmann at ans-netz.de (Oliver Lehmann)
Date: Thu Oct 22 20:06:27 2009
Subject: determining the Frequence of the PCI Bus
Message-ID: <20091022213935.9f1f11fb.lehmann@ans-netz.de>

Hi,

is there a way to find out with FreeBSD if my 33/66MHz PCI bus runs at
66MHz or at 33MHz? Either dmesg nor pciconv -lv is telling me that...

  Greetings, Oliver

-- 
 Oliver Lehmann
  http://www.pofo.de/
  http://wishlist.ans-netz.de/
From mav at FreeBSD.org  Fri Oct 23 21:38:51 2009
From: mav at FreeBSD.org (Alexander Motin)
Date: Fri Oct 23 21:38:57 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4AE073CF.40500@comcast.net>
References: <4AE04F73.1050703@comcast.net> <4AE073CF.40500@comcast.net>
Message-ID: <4AE22264.60909@FreeBSD.org>

Steve Polyack wrote:
> Alexander Motin wrote:
>>> If your conditions permit, you can try to upgrade to recent HEAD to look
>>> how will it go with newer code. I am periodically merging my work there
>>> from Perforce. Also I am going to generate new test patch for HEAD,
>>> which includes reworked PMP support, tomorrow.
>>
>> You can try this patch against today's HEAD:
>> http://people.freebsd.org/~mav/cam-ata.20091022.patch
>>   
> I tried the patch this morning against a fresh checkout of HEAD. 
> Immediately after boot only one device per PM was detected (I have two
> hooked up at the moment, 5 drives on one, 1 on the other).  However,
> about two minutes later all of the drives showed up!

I've just committed to HEAD new reset sequence for siis. Try please new
HEAD with new patch and show me full results. Patch:
http://people.freebsd.org/~mav/cam-ata.20091023.patch

Thanks.

-- 
Alexander Motin
From korvus at comcast.net  Mon Oct 26 13:55:18 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon Oct 26 13:55:32 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4AE099D8.5060103@FreeBSD.org>
References: <4AE04F73.1050703@comcast.net> <4AE073CF.40500@comcast.net>
	<4AE099D8.5060103@FreeBSD.org>
Message-ID: <4AE5AA43.7030405@comcast.net>

Alexander Motin wrote:
> Steve Polyack wrote:
>   
>> Alexander Motin wrote:
>>     
>>> You can try this patch against today's HEAD:
>>> http://people.freebsd.org/~mav/cam-ata.20091022.patch
>>>   
>>>       
>> I tried the patch this morning against a fresh checkout of HEAD. 
>> Immediately after boot only one device per PM was detected (I have two
>> hooked up at the moment, 5 drives on one, 1 on the other).  However,
>> about two minutes later all of the drives showed up!
>>
>> camcontrol also rescans the entire bus *very* quickly now, and discovers
>> all changes (new/missing disks and port multipliers).
>>
>> Here's some verbose info from /var/log/messages immediately after boot:
>> Oct 22 10:52:03 lovepod kernel: siisch0: Timeout on slot 27
>> Oct 22 10:52:03 lovepod kernel: siisch0: siis_timeout is 00000000 ss
>> 08000000 rs 08000000 es 00000000 sts 801b2000 serr 00000000
>> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
>> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
>> Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset...
>> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
>> Oct 22 10:52:03 lovepod kernel: siisch0: hardware reset ...
>> Oct 22 10:52:03 lovepod kernel: siisch0: SATA connect timeout
>> status=00000001
>> Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset done: phy reset
>> found no device
>> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Command timed out
>> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): error 5
>> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Retries Exhausted
>> Oct 22 10:52:03 lovepod kernel: siisch0: DISCONNECT requested
>>     
>
> What was before that? Can you send me full verbose boot messages?
>
>   
Here's a full dmesg from today using the 10/22/2009 head and patch.  It 
actually failed to detect all but one of 6 drives this time.  I'm about 
to try today's head and patch.  I'll let you know how it goes.

-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #2: Thu Oct 22 10:34:44 EDT 2009
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff809e7000.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff809e7260.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2133421704 Hz
CPU: Intel(R) Xeon(R) CPU           E5506  @ 2.13GHz (2133.42-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4299161600 (4100 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000093fff, 602112 bytes (147 pages)
0x0000000000a16000 - 0x00000000b60fffff, 3043926016 bytes (743146 pages)
0x00000000bf78e000 - 0x00000000bf78ffff, 8192 bytes (2 pages)
0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages)
avail memory = 4095377408 (3905 MB)
ACPI APIC Table: <061909 APIC1420>
INTR: Adding local APIC 18 as a target
INTR: Adding local APIC 20 as a target
INTR: Adding local APIC 22 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID: 16
 cpu1 (AP): APIC ID: 18
 cpu2 (AP): APIC ID: 20
 cpu3 (AP): APIC ID: 22
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xfa710 00024 (v2 ACPIAM)
ACPI: XSDT 0xbf790100 0008C (v1 NEC             20090619 MSFT 00000097)
ACPI: FACP 0xbf790290 000F4 (v4 061909 FACP1420 20090619 MSFT 00000097)
ACPI: DSDT 0xbf790670 05B8F (v2  10006 10006000 00000000 INTL 20051117)
ACPI: FACS 0xbf79e000 00040
ACPI: APIC 0xbf790390 000D2 (v2 061909 APIC1420 20090619 MSFT 00000097)
ACPI: MCFG 0xbf790470 0003C (v1 061909 OEMMCFG  20090619 MSFT 00000097)
ACPI: SLIC 0xbf7904b0 00176 (v1 NEC             20090619 MSFT 00000097)
ACPI: ERST 0xbf790630 00040 (v1 061909 WHEA1420 20090619 MSFT 00000097)
ACPI: OEMB 0xbf79e040 0007B (v1 061909 OEMB1420 20090619 MSFT 00000097)
ACPI: HPET 0xbf79a670 00038 (v1 061909 OEMHPET  20090619 MSFT 00000097)
ACPI: DMAR 0xbf79e0c0 00120 (v1    AMI  OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 0xbf79efb0 00363 (v1 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: EINJ 0xbf79a6b0 00130 (v1  AMIER AMI_EINJ 20090619 MSFT 00000097)
ACPI: BERT 0xbf79a840 00030 (v1  AMIER AMI_BERT 20090619 MSFT 00000097)
ACPI: ERST 0xbf79a870 001B0 (v1  AMIER AMI_ERST 20090619 MSFT 00000097)
ACPI: HEST 0xbf79aa20 000A8 (v1  AMIER AMI_HEST 20090619 MSFT 00000097)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x10000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
acpi0: <NEC > on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
ACPI timer: 1/2 1/2 1/1 1/0 1/0 1/2 1/0 1/0 1/1 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   15   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   15   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   14   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   14   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    7   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    6   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    6   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfed40000-0xfed44fff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3403, revid=0x13
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x3408, revid=0x13
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340a, revid=0x13
	domain=0, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340e, revid=0x13
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x3410, revid=0x13
	domain=0, bus=0, slot=9, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x342e, revid=0x13
	domain=0, bus=0, slot=20, func=0
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3422, revid=0x13
	domain=0, bus=0, slot=20, func=1
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3423, revid=0x13
	domain=0, bus=0, slot=20, func=2
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3438, revid=0x13
	domain=0, bus=0, slot=20, func=3
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3430, revid=0x13
	domain=0, bus=0, slot=22, func=0
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacfc000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3431, revid=0x13
	domain=0, bus=0, slot=22, func=1
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacf8000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3432, revid=0x13
	domain=0, bus=0, slot=22, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacf4000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3433, revid=0x13
	domain=0, bus=0, slot=22, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacf0000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3429, revid=0x13
	domain=0, bus=0, slot=22, func=4
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacec000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x342a, revid=0x13
	domain=0, bus=0, slot=22, func=5
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xface8000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x342b, revid=0x13
	domain=0, bus=0, slot=22, func=6
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xface4000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x342c, revid=0x13
	domain=0, bus=0, slot=22, func=7
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xface0000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a37, revid=0x00
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xbc00, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a38, revid=0x00
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=7
	map[20]: type I/O Port, range 32, base 0xb880, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x3a39, revid=0x00
	domain=0, bus=0, slot=26, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=14
	map[20]: type I/O Port, range 32, base 0xb800, size  5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a3c, revid=0x00
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfacde000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacde000
found->	vendor=0x8086, dev=0x3a3e, revid=0x00
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=6
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfacd8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x3a40, revid=0x00
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a48, revid=0x00
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a4a, revid=0x00
	domain=0, bus=0, slot=28, func=5
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a34, revid=0x00
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xb480, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x3a35, revid=0x00
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=14
	map[20]: type I/O Port, range 32, base 0xb400, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a36, revid=0x00
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	map[20]: type I/O Port, range 32, base 0xb080, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3a3a, revid=0x00
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfacdc000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacdc000
found->	vendor=0x8086, dev=0x244e, revid=0x90
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a16, revid=0x00
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a22, revid=0x00
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0xb000, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xac00, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xa880, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xa800, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xa480, size  5, enabled
	map[24]: type Memory, range 32, base 0xfacd2000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a30, revid=0x00
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	map[10]: type Memory, range 64, base 0xfacd0000, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   4
pcib3:   I/O decode        0xc000-0xcfff
pcib3:   memory decode     0xfad00000-0xfadfffff
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x12d8, dev=0xe111, revid=0x02
	domain=0, bus=3, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: <PCI-PCI bridge> irq 16 at device 0.0 on pci3
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xc000-0xcfff
pcib4:   memory decode     0xfad00000-0xfadfffff
pcib4:   no prefetched decode
pci4: <PCI bus> on pcib4
pci4: domain=0, physical bus=4
found->	vendor=0x1095, dev=0x3124, revid=0x01
	domain=0, bus=4, slot=4, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x01df, statreg=0x02b0, cachelnsz=64 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfadfe000, size  7, enabled
pcib4: requested memory range 0xfadfe000-0xfadfe07f: good
pcib3: requested memory range 0xfadfe000-0xfadfe07f: good
	map[18]: type Memory, range 64, base 0xfadf0000, size 15, enabled
pcib4: requested memory range 0xfadf0000-0xfadf7fff: good
pcib3: requested memory range 0xfadf0000-0xfadf7fff: good
	map[20]: type I/O Port, range 32, base 0xcc00, size  4, enabled
pcib4: requested I/O range 0xcc00-0xcc0f: in range
pcib3: requested I/O range 0xcc00-0xcc0f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: slot 4 INTA is routed to irq 16
siis0: <SiI3124 SATA2 controller> port 0xcc00-0xcc0f mem 0xfadfe000-0xfadfe07f,0xfadf0000-0xfadf7fff irq 16 at device 4.0 on pci4
siis0: Reserved 0x80 bytes for rid 0x10 type 3 at 0xfadfe000
siis0: Reserved 0x8000 bytes for rid 0x18 type 3 at 0xfadf0000
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 49
siis0: [MPSAFE]
siis0: [ITHREAD]
siisch0: <SIIS channel> at channel 0 on siis0
siisch0: [MPSAFE]
siisch0: [ITHREAD]
siisch1: <SIIS channel> at channel 1 on siis0
siisch1: [MPSAFE]
siisch1: [ITHREAD]
siisch2: <SIIS channel> at channel 2 on siis0
siisch2: [MPSAFE]
siisch2: [ITHREAD]
siisch3: <SIIS channel> at channel 3 on siis0
siisch3: [MPSAFE]
siisch3: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb880
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 16 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 19 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfacde000-0xfacde3ff irq 18 at device 26.7 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 52
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0x0-0x0
pcib6:   no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib7:   domain            0
pcib7:   secondary bus     7
pcib7:   subordinate bus   7
pcib7:   I/O decode        0xd000-0xdfff
pcib7:   memory decode     0xfae00000-0xfaefffff
pcib7:   no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=7, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
	map[10]: type Memory, range 32, base 0xfaee0000, size 17, enabled
pcib7: requested memory range 0xfaee0000-0xfaefffff: good
	map[18]: type I/O Port, range 32, base 0xdc00, size  5, enabled
pcib7: requested I/O range 0xdc00-0xdc1f: in range
	map[1c]: type Memory, range 32, base 0xfaedc000, size 14, enabled
pcib7: requested memory range 0xfaedc000-0xfaedffff: good
pcib7: matched entry for 7.0.INTA
pcib7: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdc00-0xdc1f mem 0xfaee0000-0xfaefffff,0xfaedc000-0xfaedffff irq 16 at device 0.0 on pci7
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfaee0000
em0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfaedc000
em0: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 256 to local APIC 16 vector 53
msi: routing MSI-X IRQ 257 to local APIC 16 vector 54
msi: routing MSI-X IRQ 258 to local APIC 16 vector 55
em0: using IRQs 256-258 for MSI-X
em0: Using MSIX interrupts
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: bpf attached
em0: Ethernet address: 00:30:48:db:7d:9e
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib8:   domain            0
pcib8:   secondary bus     8
pcib8:   subordinate bus   8
pcib8:   I/O decode        0xe000-0xefff
pcib8:   memory decode     0xfaf00000-0xfaffffff
pcib8:   no prefetched decode
pci8: <ACPI PCI bus> on pcib8
pci8: domain=0, physical bus=8
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=8, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
	map[10]: type Memory, range 32, base 0xfafe0000, size 17, enabled
pcib8: requested memory range 0xfafe0000-0xfaffffff: good
	map[18]: type I/O Port, range 32, base 0xec00, size  5, enabled
pcib8: requested I/O range 0xec00-0xec1f: in range
	map[1c]: type Memory, range 32, base 0xfafdc000, size 14, enabled
pcib8: requested memory range 0xfafdc000-0xfafdffff: good
pcib8: matched entry for 8.0.INTA
pcib8: slot 0 INTA hardwired to IRQ 17
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xec00-0xec1f mem 0xfafe0000-0xfaffffff,0xfafdc000-0xfafdffff irq 17 at device 0.0 on pci8
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfafe0000
em1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfafdc000
em1: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 259 to local APIC 16 vector 56
msi: routing MSI-X IRQ 260 to local APIC 16 vector 57
msi: routing MSI-X IRQ 261 to local APIC 16 vector 58
em1: using IRQs 259-261 for MSI-X
em1: Using MSIX interrupts
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: bpf attached
em1: Ethernet address: 00:30:48:db:7d:9f
uhci3: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 23 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb480
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 16 vector 59
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x3f00
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfacdc000-0xfacdc3ff irq 23 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib9:   domain            0
pcib9:   secondary bus     9
pcib9:   subordinate bus   9
pcib9:   I/O decode        0xf000-0xfff
pcib9:   memory decode     0xfb000000-0xfbefffff
pcib9:   prefetched decode 0xf9000000-0xf9ffffff
pcib9:   Subtractively decoded bridge.
pci9: <ACPI PCI bus> on pcib9
pci9: domain=0, physical bus=9
found->	vendor=0x102b, dev=0x0532, revid=0x0a
	domain=0, bus=9, slot=1, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=64 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=15
	powerspec 1  supports D0 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xf9000000, size 24, enabled
pcib9: requested memory range 0xf9000000-0xf9ffffff: good
	map[14]: type Memory, range 32, base 0xfbefc000, size 14, enabled
pcib9: requested memory range 0xfbefc000-0xfbefffff: good
	map[18]: type Memory, range 32, base 0xfb000000, size 23, enabled
pcib9: requested memory range 0xfb000000-0xfb7fffff: good
pcib9: matched entry for 9.1.INTA
pcib9: slot 1 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbefc000-0xfbefffff,0xfb000000-0xfb7fffff irq 18 at device 1.0 on pci9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa49f mem 0xfacd2000-0xfacd27ff irq 19 at device 31.2 on pci0
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfacd2000
ahci0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 262 to local APIC 16 vector 64
ahci0: using IRQ 262 for MSI
ahci0: [MPSAFE]
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 6ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [MPSAFE]
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [MPSAFE]
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [MPSAFE]
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [MPSAFE]
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [MPSAFE]
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [MPSAFE]
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
Calling int 0x15 (ax=0xc000 bx=0x0000 cx=0x0000 dx=0x0000 es=0x0000 di=0x0000)
Exiting int 0x15 (ax=0x0000 bx=0xe712 cx=0x0000 dx=0x0000 es=0xf000 di=0x0000)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 60
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 61
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 16 vector 62
uart1: [FILTER]
uart1: fast interrupt
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 6E, should be 6B (20091013/tbutils-354)
ACPI: SSDT 0xbf79e1e0 008F0 (v1 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 0xbf79ead0 004D5 (v1  PmRef  P001Cst 00003001 INTL 20051117)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (15, 16)
est0: Invalid freq 2000, ignored.
est0: Invalid id16 (set, cur) = (14, 16)
est0: Invalid freq 1867, ignored.
est0: Invalid id16 (set, cur) = (13, 16)
est0: Invalid freq 1733, ignored.
est0: Invalid id16 (set, cur) = (12, 16)
est0: Invalid freq 1600, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (15, 16)
est1: Invalid freq 2000, ignored.
est1: Invalid id16 (set, cur) = (14, 16)
est1: Invalid freq 1867, ignored.
est1: Invalid id16 (set, cur) = (13, 16)
est1: Invalid freq 1733, ignored.
est1: Invalid id16 (set, cur) = (12, 16)
est1: Invalid freq 1600, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (15, 16)
est2: Invalid freq 2000, ignored.
est2: Invalid id16 (set, cur) = (14, 16)
est2: Invalid freq 1867, ignored.
est2: Invalid id16 (set, cur) = (13, 16)
est2: Invalid freq 1733, ignored.
est2: Invalid id16 (set, cur) = (12, 16)
est2: Invalid freq 1600, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (15, 16)
est3: Invalid freq 2000, ignored.
est3: Invalid id16 (set, cur) = (14, 16)
est3: Invalid freq 1867, ignored.
est3: Invalid id16 (set, cur) = (13, 16)
est3: Invalid freq 1733, ignored.
est3: Invalid id16 (set, cur) = (12, 16)
est3: Invalid freq 1600, ignored.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi0: wakeup code va 0xffffff8077774000 pa 0x4000
isa_probe_children: disabling PnP devices
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 257519 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669427 hz
Timecounter "TSC" frequency 2133421704 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attachedsiisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch2: CONNECT requested
siisch2: SIIS reset...
siisch2: ready wait time=1ms
siisch2: hardware reset ...
siisch2: SATA connect time=0ms status=00000123
siisch2: ready wait time=0ms
siisch2: SIIS reset done: devices=00000001

Waiting 15 seconds for SCSI devices to settle
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch1: SIIS reset...
siisch1: ready wait time=1ms
siisch1: hardware reset ...
siisch1: SATA connect timeout status=00000000
siisch1: SIIS reset done: phy reset found no device
siisch2: SIIS reset...
siisch2: ready wait time=1ms
siisch2: hardware reset ...
siisch2: SATA connect time=0ms status=00000123
siisch2: ready wait time=0ms
siisch2: SIIS reset done: devices=00000001
siisch3: SIIS reset...
siisch3: ready wait time=1ms
siisch3: hardware reset ...
siisch3: SATA connect timeout status=00000000
siisch3: SIIS reset done: phy reset found no device
ahcich0: AHCI reset...
ahcich0: hardware reset ...
ahcich0: SATA connect timeout status=00000000
ahcich0: AHCI reset done: phy reset found no device
ahcich1: AHCI reset...
ahcich1: hardware reset ...
ahcich1: SATA connect time=0ms status=00000123
ahcich1: ready wait time=4ms
ahcich1: AHCI reset done: device found
ahcich2: AHCI reset...
ahcich2: hardware reset ...
ahcich2: SATA connect timeout status=00000000
ahcich2: AHCI reset done: phy reset found no device
ahcich3: AHCI reset...
ahcich3: hardware reset ...
ahcich3: SATA connect timeout status=00000000
ahcich3: AHCI reset done: phy reset found no device
ahcich4: AHCI reset...
ahcich4: hardware reset ...
ahcich4: SATA connect timeout status=00000000
ahcich4: AHCI reset done: phy reset found no device
ahcich5: AHCI reset...
ahcich5: hardware reset ...
ahcich5: SATA connect timeout status=00000000
ahcich5: AHCI reset done: phy reset found no device
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ipmi0: IPMI device rev. 1, firmware rev. 1.2, version 2.0
ipmi0: Number of channels 0
ipmi0: Attached watchdog
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen1.2: <Winbond Electronics Corp> at usbus1
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
(aprobe0:siisch0:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
(aprobe2:siisch2:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
(aprobe5:ahcich1:0:0:0): SIGNATURE: 0000
pmp0 at siisch0 bus 0 scbus0 target 15 lun 0
pmp0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pmp0: 300.000MB/s transfers
PM ports: 5
PM RESET 0
PM RESET 1
PM RESET 2
siisch0: SNTF 0x0000
siisch0: SNTF 0x0000
PM RESET 3
PM RESET 4
siisch0: SNTF 0x0000
siisch0: SNTF 0x0000
PM reset done
pmp1 at siisch2 bus 0 scbus2 target 15 lun 0
pmp1: <Port Multiplier 37261095 1706> ATA/ATAPI-0PM connect done
 devicePM status: 0 - 00000123

pmp1: 300.000MB/s transfersPM status: 1 - 00000123
PM status: 2 - 00000123

PM status: 3 - 00000123
PM ports: 5
PM status: 4 - 00000123
PM RESET 0
PM RESET 1
PM RESET 2
PM RESET 3
PM RESET 4
PM reset done
ada0 at PM connect done
GEOM: new disk ada0PM status: 0 - 00000123

ahcich1 bus 0 scbus5 target 0 lun 0
ada0: <ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device
ada0: Serial Number 9VM1RYE5
ada0: 300.000MB/s transfers
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled
pass0 at siisch0 bus 0 scbus0 target 15 lun 0
pass0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pass0: 30GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
0.000MB/s transfersPM status: 1 - 00000000
PM status: 2 - 00000000
PM status: 3 - 00000000

PM status: 4 - 00000000
pass1 at siisch2 bus 0 scbus2 target 15 lun 0
pass1: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pass1: 300.000MB/s transfers
pass2 at ahcich1 bus 0 scbus5 target 0 lun 0
pass2: <ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device
pass2: Serial Number 9VM1RYE5
pass2: 300.000MB/s transfers
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x12000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x14000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x16000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 18 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 20 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 22 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 18 vector 49
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 20 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 22 vector 49
msi: Assigning MSI-X IRQ 256 to local APIC 18 vector 50
msi: Assigning MSI-X IRQ 257 to local APIC 20 vector 50
msi: Assigning MSI-X IRQ 258 to local APIC 22 vector 50
msi: Assigning MSI-X IRQ 260 to local APIC 18 vector 51
msi: Assigning MSI-X IRQ 261 to local APIC 20 vector 51
msi: Assigning MSI IRQ 262 to local APIC 22 vector 51
(aprobe1:siisch2:0:0:0): SIGNATURE: 0000
pass3 at siisch2 bus 0 scbus2 target 0 lun 0
pass3: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
pass3: Serial Number 9VS2FGFN
pass3: 300.000MB/s transfers
ada1 at siisch2 bus 0 scbus2 target 0 lun 0
ada1: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada1: Serial Number 9VS2FGFN
ada1: 300.000MB/s transfers
ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada1: Native Command Queueing enabled
GEOM: new disk ada1
Trying to mount root from ufs:/dev/label/OS/rootfs
ct_to_ts([2009-10-26 09:41:15]) = 1256550075.000000000
start_init: trying /sbin/init
em0: Link is up 1000 Mbps Full Duplex
em0: link state changed to UP
siisch0: Timeout on slot 26
siisch0: siis_timeout is 00000000 ss 04000000 rs 04000000 es 00000000 sts 801a2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(aprobe0:siisch0:0:0:0): Command timed out
(aprobe0:siisch0:0:0:0): error 5
(aprobe0:siisch0:0:0:0): Retries Exhausted
siisch0: Timeout on slot 27
siisch0: siis_timeout is 00000000 ss 08000000 rs 08000000 es 00000000 sts 801b2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect timeout status=00000001
siisch0: SIIS reset done: phy reset found no device
(aprobe0:siisch0:0:1:0): Command timed out
(aprobe0:siisch0:0:1:0): error 5
(aprobe0:siisch0:0:1:0): Retries Exhausted
siisch0: DISCONNECT requested
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch0: Timeout on slot 28
siisch0: siis_timeout is 00000000 ss 10000000 rs 10000000 es 00000000 sts 801c2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect timeout status=00000001
siisch0: SIIS reset done: phy reset found no device
(aprobe0:siisch0:0:2:0): Command timed out
(aprobe0:siisch0:0:2:0): error 5
(aprobe0:siisch0:0:2:0): Retries Exhausted
siisch0: DISCONNECT requested
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch0: Timeout on slot 29
siisch0: siis_timeout is 00000000 ss 20000000 rs 20000000 es 00000000 sts 801d2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect timeout status=00000001
siisch0: SIIS reset done: phy reset found no device
(aprobe0:siisch0:0:3:0): Command timed out
(aprobe0:siisch0:0:3:0): error 5
(aprobe0:siisch0:0:3:0): Retries Exhausted
siisch0: DISCONNECT requested
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch0: Timeout on slot 30
siisch0: siis_timeout is 00000000 ss 40000000 rs 40000000 es 00000000 sts 801e2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect timeout status=00000001
siisch0: SIIS reset done: phy reset found no device
(aprobe0:siisch0:0:4:0): Command timed out
(aprobe0:siisch0:0:4:0): error 5
(aprobe0:siisch0:0:4:0): Retries Exhausted
siisch0: DISCONNECT requested
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
PMP freeze: 0
PMP freeze: 1
PMP freeze: 2
PMP freeze: 3
PMP freeze: 4
siisch0: Timeout on slot 0
siisch0: siis_timeout is 00000000 ss 00000001 rs 00000001 es 00000000 sts 80002000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(pmp0:siisch0:0:15:0): Command timed out
(pmp0:siisch0:0:15:0): Retrying Command
siisch0: Timeout on slot 1
siisch0: siis_timeout is 00000000 ss 00000002 rs 00000002 es 00000000 sts 80012000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(pmp0:siisch0:0:15:0): Command timed out
(pmp0:siisch0:0:15:0): error 5
(pmp0:siisch0:0:15:0): Retries Exhausted
PMP release: 0
PMP release: 1
PMP release: 2
PMP release: 3
PMP release: 4
From mav at FreeBSD.org  Mon Oct 26 14:03:42 2009
From: mav at FreeBSD.org (Alexander Motin)
Date: Mon Oct 26 14:03:49 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4AE5AA43.7030405@comcast.net>
References: <4AE04F73.1050703@comcast.net> <4AE073CF.40500@comcast.net>
	<4AE099D8.5060103@FreeBSD.org> <4AE5AA43.7030405@comcast.net>
Message-ID: <4AE5AC38.4050507@FreeBSD.org>

Steve Polyack wrote:
> I'm about to try today's head and patch.  I'll let you know how it goes.

Ok. Just to be sure it is not cabling issue (I have seen such), try also
limit port speed to 1.5Gbps by adding to loader.conf:
hint.siisch.0.sata_rev=1
hint.siisch.1.sata_rev=1
hint.siisch.2.sata_rev=1
hint.siisch.3.sata_rev=1

-- 
Alexander Motin
From korvus at comcast.net  Mon Oct 26 14:24:04 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon Oct 26 14:24:19 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4AE5AC38.4050507@FreeBSD.org>
References: <4AE04F73.1050703@comcast.net> <4AE073CF.40500@comcast.net>
	<4AE099D8.5060103@FreeBSD.org> <4AE5AA43.7030405@comcast.net>
	<4AE5AC38.4050507@FreeBSD.org>
Message-ID: <4AE5B102.6000704@comcast.net>

Alexander Motin wrote:
> Steve Polyack wrote:
>   
>> I'm about to try today's head and patch.  I'll let you know how it goes.
>>     
>
> Ok. Just to be sure it is not cabling issue (I have seen such), try also
> limit port speed to 1.5Gbps by adding to loader.conf:
> hint.siisch.0.sata_rev=1
> hint.siisch.1.sata_rev=1
> hint.siisch.2.sata_rev=1
> hint.siisch.3.sata_rev=1
>
>   
Here's a dmesg from todays head and your patch from this morning.  It's 
still only sensing one disk over the two PMs.  Forcing SATA1/1.5Gbps 
operation didn't change anything.



-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #4: Mon Oct 26 10:01:55 EDT 2009
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff809e7000.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff809e7260.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2133419836 Hz
CPU: Intel(R) Xeon(R) CPU           E5506  @ 2.13GHz (2133.42-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4299161600 (4100 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000093fff, 602112 bytes (147 pages)
0x0000000000a16000 - 0x00000000b60fffff, 3043926016 bytes (743146 pages)
0x00000000bf78e000 - 0x00000000bf78ffff, 8192 bytes (2 pages)
0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages)
avail memory = 4095377408 (3905 MB)
ACPI APIC Table: <061909 APIC1420>
INTR: Adding local APIC 18 as a target
INTR: Adding local APIC 20 as a target
INTR: Adding local APIC 22 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID: 16
 cpu1 (AP): APIC ID: 18
 cpu2 (AP): APIC ID: 20
 cpu3 (AP): APIC ID: 22
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xfa710 00024 (v2 ACPIAM)
ACPI: XSDT 0xbf790100 0008C (v1 NEC             20090619 MSFT 00000097)
ACPI: FACP 0xbf790290 000F4 (v4 061909 FACP1420 20090619 MSFT 00000097)
ACPI: DSDT 0xbf790670 05B8F (v2  10006 10006000 00000000 INTL 20051117)
ACPI: FACS 0xbf79e000 00040
ACPI: APIC 0xbf790390 000D2 (v2 061909 APIC1420 20090619 MSFT 00000097)
ACPI: MCFG 0xbf790470 0003C (v1 061909 OEMMCFG  20090619 MSFT 00000097)
ACPI: SLIC 0xbf7904b0 00176 (v1 NEC             20090619 MSFT 00000097)
ACPI: ERST 0xbf790630 00040 (v1 061909 WHEA1420 20090619 MSFT 00000097)
ACPI: OEMB 0xbf79e040 0007B (v1 061909 OEMB1420 20090619 MSFT 00000097)
ACPI: HPET 0xbf79a670 00038 (v1 061909 OEMHPET  20090619 MSFT 00000097)
ACPI: DMAR 0xbf79e0c0 00120 (v1    AMI  OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 0xbf79efb0 00363 (v1 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: EINJ 0xbf79a6b0 00130 (v1  AMIER AMI_EINJ 20090619 MSFT 00000097)
ACPI: BERT 0xbf79a840 00030 (v1  AMIER AMI_BERT 20090619 MSFT 00000097)
ACPI: ERST 0xbf79a870 001B0 (v1  AMIER AMI_ERST 20090619 MSFT 00000097)
ACPI: HEST 0xbf79aa20 000A8 (v1  AMIER AMI_HEST 20090619 MSFT 00000097)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x10000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
acpi0: <NEC > on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
ACPI timer: 1/1 1/0 1/0 1/2 0/459 1/2 1/0 1/0 1/0 1/0 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   15   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   15   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   14   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   14   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    7   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    6   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    6   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfed40000-0xfed44fff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3403, revid=0x13
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x3408, revid=0x13
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340a, revid=0x13
	domain=0, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340e, revid=0x13
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x3410, revid=0x13
	domain=0, bus=0, slot=9, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x342e, revid=0x13
	domain=0, bus=0, slot=20, func=0
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3422, revid=0x13
	domain=0, bus=0, slot=20, func=1
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3423, revid=0x13
	domain=0, bus=0, slot=20, func=2
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3438, revid=0x13
	domain=0, bus=0, slot=20, func=3
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3430, revid=0x13
	domain=0, bus=0, slot=22, func=0
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacfc000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3431, revid=0x13
	domain=0, bus=0, slot=22, func=1
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacf8000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3432, revid=0x13
	domain=0, bus=0, slot=22, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacf4000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3433, revid=0x13
	domain=0, bus=0, slot=22, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacf0000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3429, revid=0x13
	domain=0, bus=0, slot=22, func=4
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacec000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x342a, revid=0x13
	domain=0, bus=0, slot=22, func=5
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xface8000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x342b, revid=0x13
	domain=0, bus=0, slot=22, func=6
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xface4000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x342c, revid=0x13
	domain=0, bus=0, slot=22, func=7
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xface0000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a37, revid=0x00
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xbc00, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a38, revid=0x00
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=7
	map[20]: type I/O Port, range 32, base 0xb880, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x3a39, revid=0x00
	domain=0, bus=0, slot=26, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=14
	map[20]: type I/O Port, range 32, base 0xb800, size  5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a3c, revid=0x00
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfacde000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacde000
found->	vendor=0x8086, dev=0x3a3e, revid=0x00
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=6
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfacd8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x3a40, revid=0x00
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a48, revid=0x00
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a4a, revid=0x00
	domain=0, bus=0, slot=28, func=5
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a34, revid=0x00
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xb480, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x3a35, revid=0x00
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=14
	map[20]: type I/O Port, range 32, base 0xb400, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a36, revid=0x00
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	map[20]: type I/O Port, range 32, base 0xb080, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3a3a, revid=0x00
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfacdc000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacdc000
found->	vendor=0x8086, dev=0x244e, revid=0x90
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a16, revid=0x00
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a22, revid=0x00
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0xb000, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xac00, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xa880, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xa800, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xa480, size  5, enabled
	map[24]: type Memory, range 32, base 0xfacd2000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a30, revid=0x00
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	map[10]: type Memory, range 64, base 0xfacd0000, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   4
pcib3:   I/O decode        0xc000-0xcfff
pcib3:   memory decode     0xfad00000-0xfadfffff
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x12d8, dev=0xe111, revid=0x02
	domain=0, bus=3, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: <PCI-PCI bridge> irq 16 at device 0.0 on pci3
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xc000-0xcfff
pcib4:   memory decode     0xfad00000-0xfadfffff
pcib4:   no prefetched decode
pci4: <PCI bus> on pcib4
pci4: domain=0, physical bus=4
found->	vendor=0x1095, dev=0x3124, revid=0x01
	domain=0, bus=4, slot=4, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x01df, statreg=0x02b0, cachelnsz=64 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfadfe000, size  7, enabled
pcib4: requested memory range 0xfadfe000-0xfadfe07f: good
pcib3: requested memory range 0xfadfe000-0xfadfe07f: good
	map[18]: type Memory, range 64, base 0xfadf0000, size 15, enabled
pcib4: requested memory range 0xfadf0000-0xfadf7fff: good
pcib3: requested memory range 0xfadf0000-0xfadf7fff: good
	map[20]: type I/O Port, range 32, base 0xcc00, size  4, enabled
pcib4: requested I/O range 0xcc00-0xcc0f: in range
pcib3: requested I/O range 0xcc00-0xcc0f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: slot 4 INTA is routed to irq 16
siis0: <SiI3124 SATA2 controller> port 0xcc00-0xcc0f mem 0xfadfe000-0xfadfe07f,0xfadf0000-0xfadf7fff irq 16 at device 4.0 on pci4
siis0: Reserved 0x80 bytes for rid 0x10 type 3 at 0xfadfe000
siis0: Reserved 0x8000 bytes for rid 0x18 type 3 at 0xfadf0000
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 49
siis0: [MPSAFE]
siis0: [ITHREAD]
siisch0: <SIIS channel> at channel 0 on siis0
siisch0: [MPSAFE]
siisch0: [ITHREAD]
siisch1: <SIIS channel> at channel 1 on siis0
siisch1: [MPSAFE]
siisch1: [ITHREAD]
siisch2: <SIIS channel> at channel 2 on siis0
siisch2: [MPSAFE]
siisch2: [ITHREAD]
siisch3: <SIIS channel> at channel 3 on siis0
siisch3: [MPSAFE]
siisch3: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb880
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 16 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 19 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfacde000-0xfacde3ff irq 18 at device 26.7 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 52
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0x0-0x0
pcib6:   no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib7:   domain            0
pcib7:   secondary bus     7
pcib7:   subordinate bus   7
pcib7:   I/O decode        0xd000-0xdfff
pcib7:   memory decode     0xfae00000-0xfaefffff
pcib7:   no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=7, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
	map[10]: type Memory, range 32, base 0xfaee0000, size 17, enabled
pcib7: requested memory range 0xfaee0000-0xfaefffff: good
	map[18]: type I/O Port, range 32, base 0xdc00, size  5, enabled
pcib7: requested I/O range 0xdc00-0xdc1f: in range
	map[1c]: type Memory, range 32, base 0xfaedc000, size 14, enabled
pcib7: requested memory range 0xfaedc000-0xfaedffff: good
pcib7: matched entry for 7.0.INTA
pcib7: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdc00-0xdc1f mem 0xfaee0000-0xfaefffff,0xfaedc000-0xfaedffff irq 16 at device 0.0 on pci7
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfaee0000
em0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfaedc000
em0: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 256 to local APIC 16 vector 53
msi: routing MSI-X IRQ 257 to local APIC 16 vector 54
msi: routing MSI-X IRQ 258 to local APIC 16 vector 55
em0: using IRQs 256-258 for MSI-X
em0: Using MSIX interrupts
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: bpf attached
em0: Ethernet address: 00:30:48:db:7d:9e
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib8:   domain            0
pcib8:   secondary bus     8
pcib8:   subordinate bus   8
pcib8:   I/O decode        0xe000-0xefff
pcib8:   memory decode     0xfaf00000-0xfaffffff
pcib8:   no prefetched decode
pci8: <ACPI PCI bus> on pcib8
pci8: domain=0, physical bus=8
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=8, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
	map[10]: type Memory, range 32, base 0xfafe0000, size 17, enabled
pcib8: requested memory range 0xfafe0000-0xfaffffff: good
	map[18]: type I/O Port, range 32, base 0xec00, size  5, enabled
pcib8: requested I/O range 0xec00-0xec1f: in range
	map[1c]: type Memory, range 32, base 0xfafdc000, size 14, enabled
pcib8: requested memory range 0xfafdc000-0xfafdffff: good
pcib8: matched entry for 8.0.INTA
pcib8: slot 0 INTA hardwired to IRQ 17
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xec00-0xec1f mem 0xfafe0000-0xfaffffff,0xfafdc000-0xfafdffff irq 17 at device 0.0 on pci8
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfafe0000
em1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfafdc000
em1: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 259 to local APIC 16 vector 56
msi: routing MSI-X IRQ 260 to local APIC 16 vector 57
msi: routing MSI-X IRQ 261 to local APIC 16 vector 58
em1: using IRQs 259-261 for MSI-X
em1: Using MSIX interrupts
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: bpf attached
em1: Ethernet address: 00:30:48:db:7d:9f
uhci3: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 23 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb480
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 16 vector 59
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x3f00
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfacdc000-0xfacdc3ff irq 23 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib9:   domain            0
pcib9:   secondary bus     9
pcib9:   subordinate bus   9
pcib9:   I/O decode        0xf000-0xfff
pcib9:   memory decode     0xfb000000-0xfbefffff
pcib9:   prefetched decode 0xf9000000-0xf9ffffff
pcib9:   Subtractively decoded bridge.
pci9: <ACPI PCI bus> on pcib9
pci9: domain=0, physical bus=9
found->	vendor=0x102b, dev=0x0532, revid=0x0a
	domain=0, bus=9, slot=1, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=64 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=15
	powerspec 1  supports D0 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xf9000000, size 24, enabled
pcib9: requested memory range 0xf9000000-0xf9ffffff: good
	map[14]: type Memory, range 32, base 0xfbefc000, size 14, enabled
pcib9: requested memory range 0xfbefc000-0xfbefffff: good
	map[18]: type Memory, range 32, base 0xfb000000, size 23, enabled
pcib9: requested memory range 0xfb000000-0xfb7fffff: good
pcib9: matched entry for 9.1.INTA
pcib9: slot 1 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbefc000-0xfbefffff,0xfb000000-0xfb7fffff irq 18 at device 1.0 on pci9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa49f mem 0xfacd2000-0xfacd27ff irq 19 at device 31.2 on pci0
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfacd2000
ahci0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 262 to local APIC 16 vector 64
ahci0: using IRQ 262 for MSI
ahci0: [MPSAFE]
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 6ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [MPSAFE]
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [MPSAFE]
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [MPSAFE]
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [MPSAFE]
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [MPSAFE]
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [MPSAFE]
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
Calling int 0x15 (ax=0xc000 bx=0x0000 cx=0x0000 dx=0x0000 es=0x0000 di=0x0000)
Exiting int 0x15 (ax=0x0000 bx=0xe712 cx=0x0000 dx=0x0000 es=0xf000 di=0x0000)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 60
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 61
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 16 vector 62
uart1: [FILTER]
uart1: fast interrupt
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 6E, should be 6B (20091013/tbutils-354)
ACPI: SSDT 0xbf79e1e0 008F0 (v1 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 0xbf79ead0 004D5 (v1  PmRef  P001Cst 00003001 INTL 20051117)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (15, 16)
est0: Invalid freq 2000, ignored.
est0: Invalid id16 (set, cur) = (14, 16)
est0: Invalid freq 1867, ignored.
est0: Invalid id16 (set, cur) = (13, 16)
est0: Invalid freq 1733, ignored.
est0: Invalid id16 (set, cur) = (12, 16)
est0: Invalid freq 1600, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (15, 16)
est1: Invalid freq 2000, ignored.
est1: Invalid id16 (set, cur) = (14, 16)
est1: Invalid freq 1867, ignored.
est1: Invalid id16 (set, cur) = (13, 16)
est1: Invalid freq 1733, ignored.
est1: Invalid id16 (set, cur) = (12, 16)
est1: Invalid freq 1600, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (15, 16)
est2: Invalid freq 2000, ignored.
est2: Invalid id16 (set, cur) = (14, 16)
est2: Invalid freq 1867, ignored.
est2: Invalid id16 (set, cur) = (13, 16)
est2: Invalid freq 1733, ignored.
est2: Invalid id16 (set, cur) = (12, 16)
est2: Invalid freq 1600, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (15, 16)
est3: Invalid freq 2000, ignored.
est3: Invalid id16 (set, cur) = (14, 16)
est3: Invalid freq 1867, ignored.
est3: Invalid id16 (set, cur) = (13, 16)
est3: Invalid freq 1733, ignored.
est3: Invalid id16 (set, cur) = (12, 16)
est3: Invalid freq 1600, ignored.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi0: wakeup code va 0xffffff8077774000 pa 0x4000
isa_probe_children: disabling PnP devices
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 257519 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669369 hz
Timecounter "TSC" frequency 2133419836 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attachedsiisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: device reset time=0ms
siisch0: SATA connect time=0ms status=00000113
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch2: CONNECT requested
siisch2: SIIS reset...
siisch2: device reset time=0ms
siisch2: SATA connect time=0ms status=00000113
siisch2: ready wait time=0ms
siisch2: SIIS reset done: devices=00000001

Waiting 15 seconds for SCSI devices to settle
siisch0: SIIS reset...
siisch0: device reset time=1ms
siisch0: SATA connect time=0ms status=00000113
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch1: SIIS reset...
siisch1: device reset time=1ms
siisch1: SATA connect timeout status=00000000
siisch1: SIIS reset done: phy reset found no device
siisch2: SIIS reset...
siisch2: device reset time=1ms
siisch2: SATA connect time=0ms status=00000113
siisch2: ready wait time=0ms
siisch2: SIIS reset done: devices=00000001
siisch3: SIIS reset...
siisch3: device reset time=1ms
siisch3: SATA connect timeout status=00000000
siisch3: SIIS reset done: phy reset found no device
ahcich0: AHCI reset...
ahcich0: hardware reset ...
ahcich0: SATA connect timeout status=00000000
ahcich0: AHCI reset done: phy reset found no device
ahcich1: AHCI reset...
ahcich1: hardware reset ...
ahcich1: SATA connect time=0ms status=00000123
ahcich1: ready wait time=4ms
ahcich1: AHCI reset done: device found
ahcich2: AHCI reset...
ahcich2: hardware reset ...
ahcich2: SATA connect timeout status=00000000
ahcich2: AHCI reset done: phy reset found no device
ahcich3: AHCI reset...
ahcich3: hardware reset ...
ahcich3: SATA connect timeout status=00000000
ahcich3: AHCI reset done: phy reset found no device
ahcich4: AHCI reset...
ahcich4: hardware reset ...
ahcich4: SATA connect timeout status=00000000
ahcich4: AHCI reset done: phy reset found no device
ahcich5: AHCI reset...
ahcich5: hardware reset ...
ahcich5: SATA connect timeout status=00000000
ahcich5: AHCI reset done: phy reset found no device
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ipmi0: IPMI device rev. 1, firmware rev. 1.2, version 2.0
ipmi0: Number of channels 0
ipmi0: Attached watchdog
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen1.2: <Winbond Electronics Corp> at usbus1
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
(aprobe0:siisch0:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
(aprobe2:siisch2:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
(aprobe5:ahcich1:0:0:0): SIGNATURE: 0000
pmp0 at siisch0 bus 0 scbus0 target 15 lun 0
pmp0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pmp0: 150.000MB/s transfers
PM ports: 5
PM RESET 0
PM RESET 1
PM RESET 2
siisch0: SNTF 0x0000
siisch0: SNTF 0x0000
PM RESET 3
PM RESET 4
siisch0: SNTF 0x0000
siisch0: SNTF 0x0000
PM reset done
pmp1 at siisch2 bus 0 scbus2 target 15 lun 0
pmp1: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pmp1: 150.000MB/s transfers
PM ports: 5
PM RESET 0
PM RESET 1
PM RESET 2
PM RESET 3
PM RESET 4
PM reset done
GEOM: new disk ada0
ada0 at ahcich1 bus 0 scbus5 target 0 lun 0
ada0: <ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device
ada0: Serial Number 9VM1RYE5
ada0: 300.000MB/s transfers
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled
pass0 at siisch0 bus 0 scbus0 target 15 lun 0
pass0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pass0: 150.000MB/s transfers
PM connect done
PM status: 0 - 00000123
PM status: 1 - 00000123
PM status: 2 - 00000123
PM status: 3 - 00000123
PM status: 4 - 00000123
pass1 at siisch2 bus 0 scbus2 target 15 lun 0
pass1: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pass1: 150.000MB/s transfers
pass2 at ahcich1 bus 0 scbus5 target 0 lun 0PM connect done

pass2: PM status: 0 - 00000123
<ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device
pass2: Serial Number 9VM1RYE5
pass2: 300.000MB/s transfers
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x12000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x16000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x14000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 18 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 20 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 22 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 18 vector 49
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 20 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 22 vector 49
msi: Assigning MSI-X IRQ 256 to local APIC 18 vector 50
msi: Assigning MSI-X IRQ 257 to local APIC 20 vector 50
msi: Assigning MSI-X IRQ 258 to local APIC 22 vector 50
msi: Assigning MSI-X IRQ 260 to local APIC 18 vector 51
msi: Assigning MSI-X IRQ 261 to local APIC 20 vector 51
msi: Assigning MSI IRQ 262 to local APIC 22 vector 51
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
Trying to mount root from ufs:/dev/label/OS/rootfs
ct_to_ts([2009-10-26 10:16:33]) = 1256552193.000000000
start_init: trying /sbin/init
PM status: 1 - 00000000
PM status: 2 - 00000000
PM status: 3 - 00000000
PM status: 4 - 00000000
(aprobe1:siisch2:0:0:0): SIGNATURE: 0000
pass3 at siisch2 bus 0 scbus2 target 0 lun 0
pass3: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
pass3: Serial Number 9VS2FGFN
pass3: 150.000MB/s transfers
ada1 at siisch2 bus 0 scbus2 target 0 lun 0GEOM: new disk ada1
ada1: 
<ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada1: Serial Number 9VS2FGFN
ada1: 150.000MB/s transfers
ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada1: Native Command Queueing enabled
em0: Link is up 1000 Mbps Full Duplex
em0: link state changed to UP
siisch0: Timeout on slot 26
siisch0: siis_timeout is 00000000 ss 04000000 rs 04000000 es 00000000 sts 801a2000 serr 00000000
siisch0: ready wait time=0ms
siisch0: ready wait time=0ms
siisch0: SIIS reset...
siisch0: device reset time=1ms
siisch0: SATA connect time=0ms status=00000113
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
PMP freeze: 1
PMP freeze: 2
PMP freeze: 3
PMP freeze: 4
(aprobe0:siisch0:0:0:0): Command timed out
(aprobe0:siisch0:0:0:0): error 5
(aprobe0:siisch0:0:0:0): Retries Exhausted
PMP freeze: 0
PM ports: -1771503359
PM RESET 0
PM reset done
PM connect done
PMP release: 0
PMP release: 1
PMP release: 2
PMP release: 3
PMP release: 4
t_delta 15.fc765cbdba5b39c0 too short
From korvus at comcast.net  Mon Oct 26 14:48:26 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon Oct 26 14:48:38 2009
Subject: FreeBSD and SATA Port Multipliers
In-Reply-To: <4AE5B102.6000704@comcast.net>
References: <4AE04F73.1050703@comcast.net> <4AE073CF.40500@comcast.net>
	<4AE099D8.5060103@FreeBSD.org> <4AE5AA43.7030405@comcast.net>
	<4AE5AC38.4050507@FreeBSD.org> <4AE5B102.6000704@comcast.net>
Message-ID: <4AE5B6B8.2010509@comcast.net>

Steve Polyack wrote:
> Alexander Motin wrote:
>> Steve Polyack wrote:
>>  
>>> I'm about to try today's head and patch.  I'll let you know how it 
>>> goes.
>>>     
>>
>> Ok. Just to be sure it is not cabling issue (I have seen such), try also
>> limit port speed to 1.5Gbps by adding to loader.conf:
>> hint.siisch.0.sata_rev=1
>> hint.siisch.1.sata_rev=1
>> hint.siisch.2.sata_rev=1
>> hint.siisch.3.sata_rev=1
>>
>>   
> Here's a dmesg from todays head and your patch from this morning.  
> It's still only sensing one disk over the two PMs.  Forcing 
> SATA1/1.5Gbps operation didn't change anything.
>
I should also note that if I do a 'camcontrol rescan', the first PM 
(with 5 physical drives attached, none detected) will vanish.  
Physically unplugging and reconnecting the device does the same.

COMMAND=/sbin/camcontrol rescan all
siisch0: Timeout on slot 29
siisch0: siis_timeout is 00000000 ss 20000000 rs 20000000 es 00000000 
sts 801f2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: device reset time=0ms
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(aprobe0:siisch0:0:15:0): Command timed out
(aprobe0:siisch0:0:15:0): error 5
(aprobe0:siisch0:0:15:0): Retries Exhausted
(pass0:siisch0:0:15:0): lost device
(pass0:siisch0:0:15:0): removing device entry
(pmp0:siisch0:0:15:0): lost device
siisch0: Timeout on slot 30
siisch0: siis_timeout is 00000000 ss 40000000 rs 40000000 es 00000000 
sts 801f0000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
(pmp0:siisch0:0:15:0): Request Requeued
(pmp0:siisch0:0:15:0): Retrying Command
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: device reset time=0ms
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(aprobe0:siisch0:0:0:0): Command timed out
(aprobe0:siisch0:0:0:0): error 5
(aprobe0:siisch0:0:0:0): Retries Exhausted
(pmp0:siisch0:0:15:0): Request Requeued
(pmp0:siisch0:0:15:0): Retrying Command
(aprobe0:siisch2:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
PMP freeze: 0

PM ports: 5
PM RESET 0 skipping

PM RESET 1
PM RESET 2

PM RESET 3
PM RESET 4

PM reset done
PM connect done
PM status: 0 - 00000123
PM status: 1 - 00000000
PM status: 2 - 00000000
PM status: 3 - 00000000
PM status: 4 - 00000000
PMP release: 0



From mav at FreeBSD.org  Fri Oct 30 20:30:55 2009
From: mav at FreeBSD.org (Alexander Motin)
Date: Fri Oct 30 20:31:01 2009
Subject: Generic Marvell 88SX7042 Cards
In-Reply-To: <1223533385.00023501.1223523002@10.7.7.3>
References: <1223533385.00023501.1223523002@10.7.7.3>
Message-ID: <4AEB4CFB.6050107@FreeBSD.org>

Adam Stylinski wrote:
>      I've been scouring through the Hardware Support list to find that
> nothing under this chipset seems to be supported.  Linux recently supports
> this with the sata_mv module and I was wondering if there was any effort to
> port a driver to BSD.  I have a Rosewill RC-218 card, which is a non-raid
> SATA-II Controller with 4 ports.  I would like to expand my zraid with this
> card.  Any more information to the progress of this would be extremely
> appreciated.  Thanks.

I've just committed basic Marvell 6042/7042 support into HEAD.
Testers are welcome.

-- 
Alexander Motin
From ivoras at gmail.com  Sat Oct 31 15:57:37 2009
From: ivoras at gmail.com (Ivan Voras)
Date: Sat Oct 31 15:57:43 2009
Subject: hostapd "deauthenticated due to local deauth request"
Message-ID: <9bbcef730910310830s43237918g1489beb1fe9fae9a@mail.gmail.com>

I'm trying to setup an AP with a run0 interface on latest 8-STABLE but
apparently 802.11 association fails:

Oct 31 16:21:30 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
802.11: associated
Oct 31 16:21:33 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
802.11: deauthenticated due to local deauth request
Oct 31 16:21:33 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
802.11: deassociated
Oct 31 16:21:35 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
802.11: associated
Oct 31 16:21:38 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
802.11: deauthenticated due to local deauth request
Oct 31 16:21:38 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
802.11: deassociated

etc. Apparently the client never comes to the phase to receive DHCP address.

The client in this case is WinXP and the setup did work with 7-STABLE,
though with a bug in the rum driver which caused regular kernel panics
on the AP.

The devices are configured like this:

rum0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
	ether 00:1c:f0:9d:08:b3
	media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
	status: running
wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 1500
	ether 00:1c:f0:9d:08:b3
	inet6 fe80::21c:f0ff:fe9d:8b3%wlan0 prefixlen 64 scopeid 0x6
        inet 10.0.0.3 netmask 0xffffff00 broadcast 10.0.0.255
	media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
	status: running
	ssid Cosmos channel 1 (2412 Mhz 11g) bssid 00:1c:f0:9d:08:b3
	country US authmode WPA privacy MIXED deftxkey 3 TKIP 2:128-bit
	TKIP 3:128-bit txpower 0 scanvalid 60 protmode CTS dtimperiod 1 -dfs

hostapd.conf contains:

interface=wlan0
debug=3
ctrl_interface=/var/run/hostapd
ctrl_interface_group=wheel
ssid=Cosmos
wpa=1
wpa_passphrase=something
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP

Any ideas?
From onemda at gmail.com  Sat Oct 31 16:46:47 2009
From: onemda at gmail.com (Paul B Mahol)
Date: Sat Oct 31 16:46:59 2009
Subject: hostapd "deauthenticated due to local deauth request"
In-Reply-To: <9bbcef730910310830s43237918g1489beb1fe9fae9a@mail.gmail.com>
References: <9bbcef730910310830s43237918g1489beb1fe9fae9a@mail.gmail.com>
Message-ID: <3a142e750910310916labe85e5ke804386a834c49c8@mail.gmail.com>

On 10/31/09, Ivan Voras <ivoras@gmail.com> wrote:
> I'm trying to setup an AP with a run0 interface on latest 8-STABLE but
> apparently 802.11 association fails:
>
> Oct 31 16:21:30 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
> 802.11: associated
> Oct 31 16:21:33 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
> 802.11: deauthenticated due to local deauth request
> Oct 31 16:21:33 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
> 802.11: deassociated
> Oct 31 16:21:35 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
> 802.11: associated
> Oct 31 16:21:38 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
> 802.11: deauthenticated due to local deauth request
> Oct 31 16:21:38 ursaminor hostapd: wlan0: STA 00:22:69:07:30:9e IEEE
> 802.11: deassociated
>
> etc. Apparently the client never comes to the phase to receive DHCP address.
>
> The client in this case is WinXP and the setup did work with 7-STABLE,
> though with a bug in the rum driver which caused regular kernel panics
> on the AP.
>

I tried same one with rum(4) as AP and ndis(4) as client on same
machine(some version of 8.0 - CURRENT). ndis client (configured via
wpa_supplicant)
would keep auth and deauth all the time.
I came to conclusion that rum is broken. But I think I remmember that
bwi(4) (as a client)
did not have such problem ... (I will test again to see)