Hello all.
I have a problem with Intel LGA775 DP45SG Intel P45/ICH10R motherboard
on FreeBSD/amd64. Any devices (keyboard, sata, net) don't work after
kernel loading. It works for i386 (expect for keyboard: first pressed
key "sticks").
FreeBSD versions that i tried are: 7.0-RELEASE, 7.2-RELEASE, 8.0-CURRENT
There was no difference with/without ACPI.
I connect serial console, boot -v and I'm seeing FreeBSD complaining
about inability to allocate interrupts for devices, like the log below:
OK boot -v -h
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=00000000bf9e3000
SMAP type=04 base=00000000bfae3000 len=0000000000023000
SMAP type=02 base=00000000bfb06000 len=0000000000245000
SMAP type=04 base=00000000bfd4b000 len=0000000000001000
SMAP type=01 base=00000000bfd4c000 len=0000000000002000
SMAP type=04 base=00000000bfd4e000 len=0000000000007000
SMAP type=01 base=00000000bfd55000 len=0000000000002000
SMAP type=04 base=00000000bfd57000 len=0000000000005000
SMAP type=02 base=00000000bfd5c000 len=0000000000001000
SMAP type=04 base=00000000bfd5d000 len=0000000000001000
SMAP type=03 base=00000000bfd5e000 len=0000000000007000
SMAP type=04 base=00000000bfd65000 len=000000000000a000
SMAP type=02 base=00000000bfd6f000 len=000000000001f000
SMAP type=04 base=00000000bfd8e000 len=0000000000006000
SMAP type=01 base=00000000bfd94000 len=000000000016c000
SMAP type=01 base=0000000100000000 len=0000000040000000
SMAP type=02 base=00000000fed1c000 len=0000000000004000
SMAP type=02 base=00000000ff000000 len=0000000001000000
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 07:18:07 UTC 2009
root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80cd4000.
Calibrating clock(s) ... i8254 clock: 1193205 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2999971323 Hz
CPU: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz (2999.97-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x408e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 4278108160 (4079 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000d02000 - 0x00000000b6462fff, 3044413440 bytes (743265 pages)
0x00000000bfd4c000 - 0x00000000bfd4dfff, 8192 bytes (2 pages)
0x00000000bfd55000 - 0x00000000bfd56fff, 8192 bytes (2 pages)
0x00000000bfd94000 - 0x00000000bfefffff, 1490944 bytes (364 pages)
0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages)
avail memory = 4097732608 (3907 MB)
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 1 2009 07:16:51)
ACPI: RSDP @ 0x0xf03c0/0x0024 (v 2 INTEL)
ACPI: XSDT @ 0x0xbfd63e18/0x004C (v 1 INTEL DP45SG 0x00000088 MSFT 0x00010013)
ACPI Warning (tbutils-0243): Incorrect checksum in table [XSDT] - A0, should be 56 [20070320]
ACPI: FACP @ 0x0xbfd62d98/0x00F4 (v 4 INTEL DP45SG 0x00000088 MSFT 0x00010013)
ACPI: DSDT @ 0x0xbfd5e018/0x3D76 (v 1 INTEL DP45SG 0x00000088 INTL 0x20051117)
ACPI: FACS @ 0x0xbfd6ce40/0x0040
ACPI: APIC @ 0x0xbfd62f18/0x006C (v 2 INTEL DP45SG 0x00000088 MSFT 0x00010013)
ACPI: MCFG @ 0x0xbfd6dd98/0x003C (v 1 INTEL DP45SG 0x00000088 MSFT 0x00000097)
ACPI: HPET @ 0x0xbfd6dd18/0x0038 (v 1 INTEL DP45SG 0x00000088 AMI. 0x00000003)
ACPI: ASPT @ 0x0xbfd6da98/0x002C (v 1 INTEL PerfTune 0x00000088 AMI 0x00000003)
acpi0: <INTEL DP45SG> on motherboard
acpi0: could not allocate interrupt
ACPI Exception (evevent-0257): AE_ALREADY_EXISTS, Unable to install System Control Interrupt handler [20070320]
acpi0: Could not enable ACPI: AE_ALREADY_EXISTS
device_attach: acpi0 attach returned 6
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2e20, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2e21, revid=0x02
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x10cd, revid=0x00
domain=0, bus=0, slot=25, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xd3200000, size 17, enabled
map[14]: type Memory, range 32, base 0xd3224000, size 12, enabled
map[18]: type I/O Port, range 32, base 0xf0e0, size 5, enabled
found-> vendor=0x8086, dev=0x3a37, revid=0x00
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0xf0c0, size 5, enabled
found-> vendor=0x8086, dev=0x3a38, revid=0x00
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type I/O Port, range 32, base 0xf0a0, size 5, enabled
found-> vendor=0x8086, dev=0x3a39, revid=0x00
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
map[20]: type I/O Port, range 32, base 0xf080, size 5, enabled
found-> vendor=0x8086, dev=0x3a3c, revid=0x00
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd3225400, size 10, enabled
found-> vendor=0x8086, dev=0x3a3e, revid=0x00
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd3220000, size 14, enabled
found-> vendor=0x8086, dev=0x3a34, revid=0x00
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled
found-> vendor=0x8086, dev=0x3a35, revid=0x00
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled
found-> vendor=0x8086, dev=0x3a36, revid=0x00
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
map[20]: type I/O Port, range 32, base 0xf020, size 5, enabled
found-> vendor=0x8086, dev=0x3a3a, revid=0x00
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd3225000, size 10, enabled
found-> vendor=0x8086, dev=0x244e, revid=0x90
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a16, revid=0x00
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a20, revid=0x00
domain=0, bus=0, slot=31, func=2
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xf170, size 4, enabled
map[24]: type I/O Port, range 32, base 0xf160, size 4, enabled
found-> vendor=0x8086, dev=0x3a30, revid=0x00
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
map[10]: type Memory, range 64, base 0xd3225800, size 8, enabled
map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled
found-> vendor=0x8086, dev=0x3a26, revid=0x00
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xf150, size 3, enabled
map[14]: type I/O Port, range 32, base 0xf140, size 2, enabled
map[18]: type I/O Port, range 32, base 0xf130, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xf120, size 2, enabled
map[20]: type I/O Port, range 32, base 0xf110, size 4, enabled
map[24]: type I/O Port, range 32, base 0xf100, size 4, enabled
pcib1: <PCI-PCI bridge> irq 11 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xc0000000-0xd30fffff
pcib1: no prefetched decode
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0422, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xd2000000, size 24, enabled
pcib1: requested memory range 0xd2000000-0xd2ffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
pcib1: requested memory range 0xc0000000-0xcfffffff: good
map[1c]: type Memory, range 64, base 0xd0000000, size 25, enabled
pcib1: requested memory range 0xd0000000-0xd1ffffff: good
map[24]: type I/O Port, range 32, base 0xe000, size 7, enabled
pcib1: requested I/O range 0xe000-0xe07f: in range
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 11 at device 0.0 on pci1
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xf0e0-0xf0ff mem 0xd3200000-0xd321ffff,0xd3224000-0xd3224fff irq 10 at device 25.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd3200000
em0: attempting to allocate 1 MSI vectors (1 supported)
em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xd3224000
em0: Unable to allocate bus resource: interrupt
device_attach: em0 attach returned 6
uhci0: <UHCI (generic) USB controller> port 0xf0c0-0xf0df irq 11 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf0c0
uhci0: Could not allocate irq
device_attach: uhci0 attach returned 6
uhci1: <UHCI (generic) USB controller> port 0xf0a0-0xf0bf irq 5 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf0a0
uhci1: Could not allocate irq
device_attach: uhci1 attach returned 6
uhci2: <UHCI (generic) USB controller> port 0xf080-0xf09f irq 3 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf080
uhci2: Could not allocate irq
device_attach: uhci2 attach returned 6
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd3225400-0xd32257ff irq 3 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd3225400
ehci0: Could not allocate irq
device_attach: ehci0 attach returned 6
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
uhci3: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 11 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf060
uhci3: Could not allocate irq
device_attach: uhci3 attach returned 6
uhci4: <UHCI (generic) USB controller> port 0xf040-0xf05f irq 10 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf040
uhci4: Could not allocate irq
device_attach: uhci4 attach returned 6
uhci5: <UHCI (generic) USB controller> port 0xf020-0xf03f irq 3 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf020
uhci5: Could not allocate irq
device_attach: uhci5 attach returned 6
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd3225000-0xd32253ff irq 11 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd3225000
ehci1: Could not allocate irq
device_attach: ehci1 attach returned 6
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xd3100000-0xd31fffff
pcib2: no prefetched decode
pcib2: Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x11c1, dev=0x5811, revid=0x70
domain=0, bus=2, slot=0, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd3100000, size 12, enabled
pcib2: requested memory range 0xd3100000-0xd3100fff: good
fwohci0: <Lucent FW322/323> mem 0xd3100000-0xd3100fff irq 10 at device 0.0 on pci2
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd3100000
fwohci0: Could not allocate irq
device_attach: fwohci0 attach returned 6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf170-0xf17f,0xf160-0xf16f irq 10 at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf170
atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0xf160
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ata0: unable to allocate interrupt
device_attach: ata0 attach returned 6
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: unable to allocate interrupt
device_attach: ata1 attach returned 6
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port 0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf110-0xf11f,0xf100-0xf10f irq 10 at device 31.5 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf110
atapci1: unable to map interrupt
device_attach: atapci1 attach returned 6
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206000922
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: unable to allocate IRQ
psm0: unable to allocate IRQ
fdc0: cannot reserve interrupt line
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 257643 -> 100000
procfs registered
Timecounter "TSC" frequency 2999971323 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad4s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input