Logitech Communicate STX + gspca

Wed Apr 29 23:55:06 UTC 2009

Hello everyone,

this is my first post to this list, I hope my problem belongs here.

I have a Logitech Communicate STX webcam which works under Linux using the 
gspca driver but not using FreeBSD. 

When booting and loading the kernel module I get the [2] in dmesg,
usbdevs is showing [1]

I would love to use my webcam for skype with video but I am not sure what 
information needs to be provided, and what I can do to help fix the 
problem.

This seems to be my Webcam: 0x08d7
Searching for that has turned up this site http://www.lissyara.su/?id=1850
which unfortunately is not readable by me.

I would appreciate it if anyone could look into this.

kind Regards

Christof Schulze

[1] output from usbdevs -v (shortened)

% usbdevs                                                                                                                    
addr 1: UHCI root hub, Intel
addr 1: UHCI root hub, Intel
 addr 2: product 0x08d7, vendor 0x046d
addr 1: UHCI root hub, Intel
addr 1: UHCI root hub, Intel
 addr 2: Kyocera Mita FS-1020D, Kyocera Mita
 addr 3: USB Receiver, Logitech
addr 1: EHCI root hub, Intel
1:20 eri.erika% usbdevs --help                                                                                                             

% usbdevs -v                                                                                                             
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
Intel(0x0000), rev 1.00
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
Intel(0x0000), rev 1.00
 port 1 addr 2: full speed, power 100 mA, config 1, product 0x08d7(0x08d7), 
vendor 0x046d(0x046d), rev 1.00
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
Intel(0x0000), rev 1.00
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
Intel(0x0000), rev 1.00
 port 1 addr 2: full speed, self powered, config 1, Kyocera Mita 
FS-1020D(0x000e), Kyocera Mita(0x0482), rev 0.00
 port 2 addr 3: low speed, power 98 mA, config 1, USB Receiver(0xc518), 
Logitech(0x046d), rev 42.00
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), 
Intel(0x0000), rev 1.00

[1] dmesg (shortened)

gspca_attach_bridge: USB GSPCA camera found.(ZC3XX) 
spca5xx_probe: [spca5xx_probe:4259] Camera type JPEG 
zc3xx_config: [zc3xx_config:616] Find Sensor HV7131R(c)
spca5xx_getcapability: [spca5xx_getcapability:1239] maxw 640 maxh 480 minw 
176 minh 144
0 [1117] video_register_device: to be fixed but ok for now
ldev0: vendor 0x046d product 0x08d7, rev 1.10/1.00, addr 2
uaudio0: <vendor 0x046d product 0x08d7, class 0/0, rev 1.10/1.00, addr 2> 
on uhub1
uaudio0: audio rev 1.00
pcm1: <USB Audio> on uaudio0
ulpt0: <Kyocera Mita Kyocera Mita FS-1020D, class 0/0, rev 1.01/0.00, addr 
2> on uhub3
ulpt0: using bi-directional mode
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 3> on uhub3
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 3> on uhub3
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ZFS filesystem version 6
ZFS storage pool version 6
acd0: CDRW <SAMSUNG CDRW/DVD SM-352N/TA00> at ata0-master UDMA33
ad1: DMA limited to UDMA33, controller found non-ATA66 cable
ad1: 190782MB <Seagate ST3200826A 3.02> at ata0-slave UDMA33
ad4: 78533MB <Hitachi HDS722580VLSA80 V32OA63A> at ata2-master SATA150
ad6: 238475MB <SAMSUNG SP2504C VT100-50> at ata3-master SATA150
ad10: 238475MB <SAMSUNG SP2504C VT100-50> at ata5-master SATA150
Waiting 5 seconds for SCSI devices to settle
pcm0: <HDA Codec: Realtek ALC880>
pcm0: <HDA Driver Revision: 20080420_0052>
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
cd0 at ata0 bus 0 target 0 lun 0
cd0: <SAMSUNG CDRW/DVD SM-352N TA00> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - 
tray closed
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s2a
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
drm0: <ATI Radeon RV370 X300 SE> on vgapci0
info: [drm] Initialized radeon 1.25.0 20060524
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
67540 [1081] video_devdata: not complete but ok for now
spca5xx_set_light_freq: [spca5xx_set_light_freq:1920] Sensor currently not 
support light frequency banding filters.
gspca_set_isoc_ep: [gspca_set_isoc_ep:936] ISO EndPoint found 0x81 
AlternateSet 7
ldev_ioctl: called
linux: pid 2021 (skype): ioctl fd=9, cmd=0x7601 ('v',1) is not implemented
69568 [ 959] usb_kill_urb: not complete but try something
69569 [ 766] ldev_isoc_handler: usbd_cancelled 0xc6609a00
69571 [ 766] ldev_isoc_handler: usbd_cancelled 0xcc0cb200
69572 [ 766] ldev_isoc_handler: usbd_cancelled 0xcc0b2a00
69573 [ 766] ldev_isoc_handler: usbd_cancelled 0xcbef3e00
69576 [ 959] usb_kill_urb: not complete but try something
69576 [ 959] usb_kill_urb: not complete but try something
69576 [ 959] usb_kill_urb: not complete but try something
9456429 [1081] video_devdata: not complete but ok for now
spca5xx_set_light_freq: [spca5xx_set_light_freq:1920] Sensor currently not 
support light frequency banding filters.
gspca_set_isoc_ep: [gspca_set_isoc_ep:936] ISO EndPoint found 0x81 
AlternateSet 7
9457653 [ 770] ldev_isoc_handler: status 16
9457669 [ 770] ldev_isoc_handler: status 16
9457684 [ 770] ldev_isoc_handler: status 16
9457762 [ 770] ldev_isoc_handler: status 16
9459407 [ 959] usb_kill_urb: not complete but try something
9459410 [ 959] usb_kill_urb: not complete but try something
9459410 [ 959] usb_kill_urb: not complete but try something
9459410 [ 959] usb_kill_urb: not complete but try something
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part.
Url : http://lists.freebsd.org/pipermail/freebsd-hardware/attachments/20090429/c938529f/attachment.pgp