error messages dmesg/acpi on <Intel SCB20>

Thu May 29 11:46:40 UTC 2008

dmesg output

==================================================
# cat /var/run/dmesg.boot
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #0: Wed May 21 18:24:33 MSD 2008
    root at stone:/usr/obj/usr/src/sys/STONE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family      1400MHz (1396.45-MHz 
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1

Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1610350592 (1535 MB)
avail memory = 1568567296 (1495 MB)
ACPI APIC Table: <INTEL  SCB20   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  3
 cpu1 (AP): APIC ID:  0
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
lapic3: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL SCB20> on motherboard
ACPI Warning (dswload-0794): Type override - [DEB_] had invalid type 
(Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [MLIB] had invalid type 
(Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [DATA] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [SIO_] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [SB__] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [PM__] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [ICNT] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [ACPI] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [LEDP] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [WUES] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [WUSE] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [CSB5] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [PM__] had invalid type 
(String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [BIOS] had invalid type 
(Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [CMOS] had invalid type 
(Integer) for Scope operator, changed to (Scope) [20070320]
acpi0: [ITHREAD]
ACPI Error (evxfevnt-0288): Could not enable GlobalLock event [20070320]
ACPI Warning (evxface-0235): Could not enable fixed event 1 [20070320]
ACPI Error (evmisc-0487): No response from Global Lock hardware, 
disabling lock [20070320]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
atapci0: <Promise PDC20267 UDMA100 controller> port 
0x1400-0x1407,0x1408-0x140b,0x1410-0x1417,0x140c-0x140f,0x1440-0x147f 
mem 0xfe7a0000-0xfe7bffff irq 19 at device 2.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x1480-0x14bf mem 
0xfe790000-0xfe790fff,0xfe760000-0xfe77ffff irq 21 at device 3.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:03:47:a5:6e:c9
fxp0: [ITHREAD]
fxp1: <Intel 82550 Pro/100 Ethernet> port 0x14c0-0x14ff mem 
0xfe750000-0xfe750fff,0xfe720000-0xfe73ffff irq 20 at device 4.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:03:47:a5:6e:cb
fxp1: [ITHREAD]
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 
0xfd000000-0xfdffffff,0xfe7f0000-0xfe7f0fff irq 18 at device 12.0 on pci0
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks CSB5 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3a0-0x3af,0x410-0x413 at device 
15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xc7fff,0xc8000-0xd07ff,0xe4000-0xe7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 114473MB <Seagate ST3120026A 3.06> at ata2-master UDMA100
ad6: 114473MB <Seagate ST3120026A 3.06> at ata3-master UDMA100
ar0: 114440MB <Promise Fasttrak RAID1> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
lapic0: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ar0s1a
==================================================

part of kenv output
==================================================

smbios.bios.reldate="10/18/2001"
smbios.bios.vendor="Intel Corporation"
smbios.bios.version="SCB20.86B.0013.P02.0110181617   "
smbios.chassis.maker=" "
smbios.chassis.serial="            "
smbios.chassis.tag="                        "
smbios.chassis.version="          "
smbios.planar.maker="Intel"
smbios.planar.product="SCB2A"
smbios.planar.serial="KKC115000476"
smbios.planar.version="A46043-607"
smbios.socket.enabled="2"
smbios.socket.populated="2"
smbios.system.maker="Intel"
smbios.system.product="SCB20"
==================================================

/Vladimir Ermakov