AW: freebsd-hardware Digest, Vol 230, Issue 6

[ANDREAS Werner OSTERTAG]

waterline got to have only 50mA~ to energie


----- Ursprüngliche Mail ----
Von: "freebsd-hardware-request at freebsd.org" <freebsd-hardware-request at freebsd.org>
An: freebsd-hardware at freebsd.org
Gesendet: Samstag, den 8. September 2007, 14:00:08 Uhr
Betreff: freebsd-hardware Digest, Vol 230, Issue 6


Send freebsd-hardware mailing list submissions to
    freebsd-hardware at freebsd.org

To subscribe or unsubscribe via the World Wide Web, visit
    http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
or, via email, send a message with subject or body 'help' to
    freebsd-hardware-request at freebsd.org

You can reach the person managing the list at
    freebsd-hardware-owner at freebsd.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of freebsd-hardware digest..."


Today's Topics:

   1. Intel SR1500AL SAS/SATA RAID problem (Rihad)
   2. Re: SIL 3114a (soralx at cydem.org)


----------------------------------------------------------------------

Message: 1
Date: Sat, 08 Sep 2007 10:49:20 +0500
From: Rihad <admin at azuni.net>
Subject: Intel SR1500AL SAS/SATA RAID problem
To: freebsd-hardware at freebsd.org
Message-ID: <46E237E0.5000900 at azuni.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi,

I'm attempting to install FreeBSD 6.2 on Intel Server System SR1500AL 
with 2 SAS drives set up as RAID1. The problem is that the OS can't see 
the RAID, only the 2 separate drives. As I also had problems with Ubuntu 
Linux recognizing RAID1 on an almost twin board, but with 2 SATA disks 
instead of SAS, I asked their support forum. Someone there suggested [*] 
that ESB2 controller used by Intel is software based, and that I must 
use software RAID to make use of it. I'm not sure if I should do the 
same with FreeBSD/SAS array too? Maybe there's a ready to go driver?

Thanks.

[*] http://ubuntuforums.org/showthread.php?p=3329522#post3329522


------------------------------

Message: 2
Date: Sat, 08 Sep 2007 00:34:28 -0700
From: soralx at cydem.org
Subject: Re: SIL 3114a
To: vic at virtualis.lv
Cc: freebsd-hardware at freebsd.org
Message-ID: <20070908003428.721d25f1 at soralx>
Content-Type: text/plain; charset=US-ASCII


> I have a question about Silicon Image 3114a SATA controller and
> FreeBSD 5.3-Release... Will it work? Any experience?

atapci0 at pci2:3:0:    class=0x010400 card=0x61141095 chip=0x31141095
rev=0x02 hdr=0x00 vendor     = 'Silicon Image Inc (Was: CMD Technology
Inc)' device     = 'Sil 3114 SATALink/SATARaid Controller'
    class      = mass storage

worked in 5.2.1-RELEASE for me

> 
> Thanks in advance..
> 
> --
> ViC

[SorAlx]  ridin' VS1400


------------------------------

_______________________________________________
freebsd-hardware at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscribe at freebsd.org"

End of freebsd-hardware Digest, Vol 230, Issue 6
************************************************


      Die etwas anderen Infos rund um das Thema Reisen. BE A BETTER WELTENBUMMLER!  www.yahoo.de/clever