Example 'megacli -AdpAllInfo -aAll' output

Mark Watts m.watts at eris.qinetiq.com
Wed Mar 28 13:46:32 UTC 2007


> megacli -AdpAllInfo -aAll

[root at satellite ~]# MegaCli -AdpAllInfo -aAll

Adapter #0

==============================================================================
                Versions
                ================
Product Name    : PERC 5/i Integrated
Serial No       : 12345
FW Package Build: 5.0.1-0030
FW Version      : 1.00.01-0088
BIOS Version    : MT23
Ctrl-R Version  :1.02-007

                Pending Images In Flash
                ================
None

                PCI Info
                ================
Vendor Id       : 1028
Device Id       : 0015
SubVendorId     : 1028
SubDeviceId     : 1f03

Host Interface  : PCIE

Number of Frontend Port: 0
Device Interface  : PCIE

Number of Backend Port: 8
Port  :  Address
0        1221000000000000
1        1221000001000000
2        1221000002000000
3        1221000003000000
4        1221000004000000
5        1221000005000000
6        0000000000000000
7        0000000000000000

                HW Configuration
                ================
SAS Address     : 5001372069618600
BBU             : Present
Alarm           : Present
NVRAM           : Present
Serial Debugger : Present
Memory          : Present
Flash           : Present

                Settings
                ================
Current Time                     : 13:29:20 3/28, 2007
Predictive Fail Poll Interval    : 300sec
Interrupt Throttle Active Count  : 16
Interrupt Throttle Completion    : 50us
Rebuild Rate                     : 30%
PR Rate                          : 30%
Resynch Rate                     : 30%
Check Consistency Rate           : 30%
Reconstruction Rate              : 30%
Cache flush interval             : 4s
Max drives to spinup at one time : 2
Delay among spinup groups        : 12s
Physical drive coercion mode     : 128MB
Cluster mode                     : Disabled
Alarm                            : Disabled
Auto Rebuild                     : Enabled
Battery Warning                  : Enabled

Ecc Bucket Size                  : 15
Ecc Bucket Leak Rate             : 1440 Minutes
Restore HotSpare On Insertion    : Disabled
Expose Enclosure Devices         : Disabled
Maintain PD Fail History         : Disabled
Host Request Reordering          : Enabled

                Capabilities
                ================
RAID Level Supported             : RAID0, RAID1, RAID5, RAID10, RAID50
Supported Drives                 : SAS, SATA

Allowed Mixing:
Mix In Enclosure Allowed

                Status
                ================
ECC Bucket Count                 : 0

                Limitations
                ================
Max Arms Per VD         : 32
Max Spans Per VD        : 8
Max Arrays              : 128
Max Number of VDs       : 64
Max Parallel Commands   : 1008
Max SGE Count           : 80
Max Data Transfer Size  : 8192 sectors
Max Strips PerIO        : 84
Min Stripe Size         : 8kB
Max Stripe Size         : 128kB

                Device Present
                ================
Virtual Drives    : 1
  Degraded        : 0
  Offline         : 0
Physical Devices  : 7
  Disks           : 6
  Critical Disks  : 0
  Failed Disks    : 0

                Supported Adapter Operations
                ================
Rebuild Rate                    : Yes
CC Rate                         : Yes
BGI Rate                        : Yes
Reconstruct Rate                : Yes
Patrol Read Rate                : Yes
Alarm Control                   : Yes
Cluster Support                 : No
BBU                             : Yes
Spanning                        : Yes
Dedicated Hot Spare             : Yes
revertible Hot Spares           : No
Foreign Config Import           : Yes
Self Diagnostic                 : Yes
Allow Mixed Redundancy On Array : No
Global Hot Spares               : Yes
Deny SCSI Passthrough           : No
Deny SMP Passthrough            : No
Deny STP Passthrough            : No

                Supported VD Operations
                ================
Read Policy          : Yes
Write Policy         : Yes
IO Policy            : Yes
Access Policy        : Yes
Disk Cache Policy    : Yes
Reconstruction       : Yes
Deny Locate          : No
Deny CC              : No

                Supported PD Operations
                ================
Force Online              : Yes
Force Offline             : Yes
Force Rebuild             : Yes
Deny Force Failed         : No
Deny Force Good/Bad       : No
Deny Missing Replace      : No
Deny Clear                : No
Deny Locate               : No

                Error Counters
                ================
Memory Correctable Errors   : 0
Memory Uncorrectable Errors : 0

                Cluster Information
                ================
Cluster Permitted     : No
Cluster Active        : No

                Default Settings
                ================
Phy Polarity                   : 0
Phy PolaritySplit              : 0
Backgroud Rate                 : 30
Stripe Size                    : 64kB
Flush Time                     : 4 seconds
Write Policy                   : WB
Read Policy                    : None
Cache When BBU Bad             : Disabled
Cached IO                      : No
SMART Mode                     : Mode 6
Alarm Disable                  : No
Coercion Mode                  : 128MB
ZCR Config                     : IDSEL
Dirty LED Shows Drive Activity : No
BIOS Continue On Error         : No
Spin Down Mode                 : None
Allowed Device Type            : SAS/SATA Mix
Allow Mix In Enclosure         : Yes
Allow Mix In VD                : No
Allow SATA In Cluster          : No
Max Chained Enclosures         : 1
Disable Ctrl-R                 : No
Enable Web BIOS                : No
Direct PD Mapping              : No
BIOS Enumerate VDs             : No
Restore Hot Spare On Insertion : No
Expose Enclosure Devices       : No
Maintain PD Fail History       : No

-- 
Mark Watts BSc RHCE MBCS
Senior Systems Engineer
QinetiQ Trusted Information Management
Trusted Solutions and Services Group
GPG Public Key ID: 455420ED

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-hardware/attachments/20070328/a664430d/attachment.pgp


More information about the freebsd-hardware mailing list