Dell Poweredge 1950, boot problem

[Brian A. Seklecki]

We run various Dell PE 8th gen and 9th gen.  W/ and W/O the Dell
PERC4/PERC5.  A lot of 6.2 and 6.1/i386 on the 8th gen, some amd64.  All
amd64 on the 9th gen.  We've never seen this problem.

Try 6.2-p3 amd64 instead.  Avoid buying these units w/o PERC5.  If
you're not going to get PERC5, you're better off w/ white box.

~BAS

On Thu, 2007-06-14 at 15:52 +0200, Koldo Aingeru wrote:
> Hi,
> 
> I just read your message
> (http://lists.freebsd.org/pipermail/freebsd-hardware/2006-December/004111.html)
> and I have a similar problem with a dell 2850, we have it now running
> at safe mode, did you manage to get the problem solved?
> 
> Regards.
> 
> Koldo.
> _______________________________________________
> freebsd-hardware at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe at freebsd.org"
-- 
Brian A. Seklecki <bseklecki at collaborativefusion.com>
Collaborative Fusion, Inc.




IMPORTANT: This message contains confidential information and is intended only for the individual named. If the reader of this message is not an intended recipient (or the individual responsible for the delivery of this message to an intended recipient), please be advised that any re-use, dissemination, distribution or copying of this message is prohibited.  Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.