Re: Intel® Server Board S5000VSA support

[Bob Bishop]

Hi,

On 18 Apr 2007, at 04:55, Ivan Carey wrote:

> Bob Bishop wrote:
>> Hi,
>>
>> On 16 Apr 2007, at 23:25, Ivan Carey wrote:
>>
>>> Hello
>>> Does FreeBSD 6.2 release support the Intel® Server Board  
>>> S5000VSA, [etc]
>>
>> Can't speak to this specific board, but the closely-related  
>> S5000PAL works just fine.
>>
>> -- 
>> Bob Bishop          +44 (0)118 940 1243
>> rb at gid.co.uk fax +44 (0)118 940 1295
>>
>>
>>
>>
>> _______________________________________________
>> freebsd-hardware at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
>> To unsubscribe, send any mail to "freebsd-hardware- 
>> unsubscribe at freebsd.org"
>>
>>
> Thanks Peter,

?

> I have looked at the comparison of the 2 boards. http:// 
> compare.intel.com/pcc/showchart.aspx? 
> mmID=24664,24665&familyID=9&culture=en-US
>
> They both use an ICH type of 6321ESB http://download.intel.com/ 
> design/chipsets/datashts/31308201.pdf
>
> The ata(4) man page lists support for 6300ESB do you know if this  
> is similar to the 6321ESB

I believe ata(4) should probably say 63xxESB. Anyway, the probe (on a  
S5000PAL) says:

atapci0: <Intel 63XXESB2 UDMA100 controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 20 at device  
31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x40d8-0x40df, 
0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x403f mem  
0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
ata6: <ATA channel 4> on atapci1
ata7: <ATA channel 5> on atapci1



--
Bob Bishop          +44 (0)118 940 1243
rb at gid.co.uk fax +44 (0)118 940 1295