Boot fail on Dell 2950 with any SCSI card in riser
Dennis Glatting
dg at penx.com
Tue Sep 26 07:50:24 PDT 2006
I sent this to -questions but no one responded, so I'm asking here.
I have a Dell 2950 that fails to boot if I have a SCSI card in either
of the two PCIX riser card slots. I have tried with a i386 kernel and
an amd64 kernel.
With a SCSI card installed, the system sometimes boot under a i386
kernel but under a amd64 kernel, forget it. With no SCSI card installed
the system boots and operates fine. The same is true (no trouble) if I
take the SCSI card drivers out of the kernel. When the system fails to
boot I must get cycle power to get the system back.
Under the i386 kernel I sometimes got an error message about interrupts
being disabled before the system locks up, but I didn't preserve those
messages. I have had the system boot a few times under the i386 kernel
and operate normally, but those cases were very few.
I have tried booting with several different Adaptec cards and a LSI
Logic Ultra320 SCSI card. I have enclosed the boot output of failed
boots against an Adaptec card and the LSI Logic card.
I have not clue why I'm having a problem because the same kernels and
SCSI cards work in other systems, so I'm assuming there is something
funky with this particular Dell hardware. I have three identical Dell
systems and I have this same problem in two of them (the third is
remote and doesn't need a SCSI card). BTW, Dell says "it sounds like a
driver problem" -- sigh.
I have fooled around with BIOS interrupts and other things without
success. Hints and help is appreciated.
This is a failed boot against an Adaptec card.
boot: -Dv kernel
Consoles: internal video/keyboard serial port BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS drive D: is disk2
BIOS 640kB/2095776kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(root at Elmer.dco.penx.com, Wed Sep 20 03:00:51 MDT 2006)
Loading /boot/defaults/loader.conf boot/kernel/kernel text=0x610808
data=0xd6bb8+0x6c988 syms=[0x8+0x98bc8+0x8+0x7ffac]
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=01 base=0000000000100000 len=000000007fea8000
SMAP type=03 base=000000007ffa8000 len=000000000000fc00
SMAP type=02 base=000000007ffb7c00 len=0000000000048400
SMAP type=02 base=00000000e0000000 len=0000000010000000
SMAP type=02 base=00000000fe000000 len=0000000002000000
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.2-PRERELEASE #7: Wed Sep 20 17:34:53 MDT 2006
root at Elmer:/usr/src/sys/amd64/compile/ELMER
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a6e000.
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <DELL PE_SC3 >
Calibrating clock(s) ... i8254 clock: 1193160 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2992523346 Hz
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.52-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf64 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
Logical CPUs per core: 2
real memory = 2147123200 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000b6b000 - 0x000000007c35afff, 2071920640 bytes (505840 pages)
avail memory = 2061656064 (1966 MB)
INTR: Adding local APIC 2 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 5, Interrupt 64 at 0xfec81000
ioapic1: Changing APIC ID to 5
ioapic1: WARNING: intbase 64 != expected base 24
ioapic1: intpin 0 -> PCI IRQ 64 (level, low)
ioapic1: intpin 1 -> PCI IRQ 65 (level, low)
ioapic1: intpin 2 -> PCI IRQ 66 (level, low)
ioapic1: intpin 3 -> PCI IRQ 67 (level, low)
ioapic1: intpin 4 -> PCI IRQ 68 (level, low)
ioapic1: intpin 5 -> PCI IRQ 69 (level, low)
ioapic1: intpin 6 -> PCI IRQ 70 (level, low)
ioapic1: intpin 7 -> PCI IRQ 71 (level, low)
ioapic1: intpin 8 -> PCI IRQ 72 (level, low)
ioapic1: intpin 9 -> PCI IRQ 73 (level, low)
ioapic1: intpin 10 -> PCI IRQ 74 (level, low)
ioapic1: intpin 11 -> PCI IRQ 75 (level, low)
ioapic1: intpin 12 -> PCI IRQ 76 (level, low)
ioapic1: intpin 13 -> PCI IRQ 77 (level, low)
ioapic1: intpin 14 -> PCI IRQ 78 (level, low)
ioapic1: intpin 15 -> PCI IRQ 79 (level, low)
ioapic1: intpin 16 -> PCI IRQ 80 (level, low)
ioapic1: intpin 17 -> PCI IRQ 81 (level, low)
ioapic1: intpin 18 -> PCI IRQ 82 (level, low)
ioapic1: intpin 19 -> PCI IRQ 83 (level, low)
ioapic1: intpin 20 -> PCI IRQ 84 (level, low)
ioapic1: intpin 21 -> PCI IRQ 85 (level, low)
ioapic1: intpin 22 -> PCI IRQ 86 (level, low)
ioapic1: intpin 23 -> PCI IRQ 87 (level, low)
MADT: Found IO APIC ID 6, Interrupt 160 at 0xfec84000
ioapic2: Changing APIC ID to 6
ioapic2: WARNING: intbase 160 != expected base 88
ioapic2: intpin 0 -> PCI IRQ 160 (level, low)
ioapic2: intpin 1 -> PCI IRQ 161 (level, low)
ioapic2: intpin 2 -> PCI IRQ 162 (level, low)
ioapic2: intpin 3 -> PCI IRQ 163 (level, low)
ioapic2: intpin 4 -> PCI IRQ 164 (level, low)
ioapic2: intpin 5 -> PCI IRQ 165 (level, low)
ioapic2: intpin 6 -> PCI IRQ 166 (level, low)
ioapic2: intpin 7 -> PCI IRQ 167 (level, low)
ioapic2: intpin 8 -> PCI IRQ 168 (level, low)
ioapic2: intpin 9 -> PCI IRQ 169 (level, low)
ioapic2: intpin 10 -> PCI IRQ 170 (level, low)
ioapic2: intpin 11 -> PCI IRQ 171 (level, low)
ioapic2: intpin 12 -> PCI IRQ 172 (level, low)
ioapic2: intpin 13 -> PCI IRQ 173 (level, low)
ioapic2: intpin 14 -> PCI IRQ 174 (level, low)
ioapic2: intpin 15 -> PCI IRQ 175 (level, low)
ioapic2: intpin 16 -> PCI IRQ 176 (level, low)
ioapic2: intpin 17 -> PCI IRQ 177 (level, low)
ioapic2: intpin 18 -> PCI IRQ 178 (level, low)
ioapic2: intpin 19 -> PCI IRQ 179 (level, low)
ioapic2: intpin 20 -> PCI IRQ 180 (level, low)
ioapic2: intpin 21 -> PCI IRQ 181 (level, low)
ioapic2: intpin 22 -> PCI IRQ 182 (level, low)
ioapic2: intpin 23 -> PCI IRQ 183 (level, low)
MADT: Found IO APIC ID 7, Interrupt 224 at 0xfec84800
ioapic3: Changing APIC ID to 7
ioapic3: WARNING: intbase 224 != expected base 184
ioapic3: intpin 0 -> PCI IRQ 224 (level, low)
ioapic3: intpin 1 -> PCI IRQ 225 (level, low)
ioapic3: intpin 2 -> PCI IRQ 226 (level, low)
ioapic3: intpin 3 -> PCI IRQ 227 (level, low)
ioapic3: intpin 4 -> PCI IRQ 228 (level, low)
ioapic3: intpin 5 -> PCI IRQ 229 (level, low)
ioapic3: intpin 6 -> PCI IRQ 230 (level, low)
ioapic3: intpin 7 -> PCI IRQ 231 (level, low)
ioapic3: intpin 8 -> PCI IRQ 232 (level, low)
ioapic3: intpin 9 -> PCI IRQ 233 (level, low)
ioapic3: intpin 10 -> PCI IRQ 234 (level, low)
ioapic3: intpin 11 -> PCI IRQ 235 (level, low)
ioapic3: intpin 12 -> PCI IRQ 236 (level, low)
ioapic3: intpin 13 -> PCI IRQ 237 (level, low)
ioapic3: intpin 14 -> PCI IRQ 238 (level, low)
ioapic3: intpin 15 -> PCI IRQ 239 (level, low)
ioapic3: intpin 16 -> PCI IRQ 240 (level, low)
ioapic3: intpin 17 -> PCI IRQ 241 (level, low)
ioapic3: intpin 18 -> PCI IRQ 242 (level, low)
ioapic3: intpin 19 -> PCI IRQ 243 (level, low)
ioapic3: intpin 20 -> PCI IRQ 244 (level, low)
ioapic3: intpin 21 -> PCI IRQ 245 (level, low)
ioapic3: intpin 22 -> PCI IRQ 246 (level, low)
ioapic3: intpin 23 -> PCI IRQ 247 (level, low)
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 5
MADT: Ignoring local NMI routed to ACPI CPU 6
MADT: Ignoring local NMI routed to ACPI CPU 7
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
ioapic2 <Version 2.0> irqs 160-183 on motherboard
ioapic3 <Version 2.0> irqs 224-247 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd0 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Sep 20 2006 17:32:55)
acpi0: <DELL PE_SC3> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80126814
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25c08086)
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 16 func 1
AcpiOsDerivePciId: bus 0 dev 16 func 0
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 10 11 12
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 10 11 12
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 10 11 12
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 10 11 12
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x25c0, revid=0x12
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e2, revid=0x12
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x25e3, revid=0x12
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x25f8, revid=0x12
bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x25e5, revid=0x12
bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f9, revid=0x12
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x25e7, revid=0x12
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x12
bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x12
bus=0, slot=16, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x12
bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f1, revid=0x12
bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f3, revid=0x12
bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f5, revid=0x12
bus=0, slot=21, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f6, revid=0x12
bus=0, slot=22, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2690, revid=0x09
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x2688, revid=0x09
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000cce0, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2689, revid=0x09
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 0000ccc0, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 20
found-> vendor=0x8086, dev=0x268a, revid=0x09
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 0000cca0, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 21
found-> vendor=0x8086, dev=0x268c, revid=0x09
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fc900400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x244e, revid=0xd9
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2670, revid=0x09
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x269e, revid=0x09
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x8086, dev=0x2680, revid=0x09
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=6
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000cc98, size 3, enabled
map[14]: type 4, range 32, base 0000cc90, size 2, enabled
map[18]: type 4, range 32, base 0000cc80, size 3, enabled
map[1c]: type 4, range 32, base 0000cc78, size 2, enabled
map[20]: type 4, range 32, base 0000cc60, size 4, enabled
map[24]: type 1, range 32, base fc900000, size 10, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 23
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: secondary bus 6
pcib1: subordinate bus 11
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf2000000-0xf7ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib1
pci6: physical bus=6
found-> vendor=0x8086, dev=0x3500, revid=0x01
bus=6, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x350c, revid=0x01
bus=6, slot=0, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pcib2: secondary bus 7
pcib2: subordinate bus 10
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xf4000000-0xf7ffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci7: <ACPI PCI bus> on pcib2
pci7: physical bus=7
found-> vendor=0x8086, dev=0x3510, revid=0x01
bus=7, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x3514, revid=0x01
bus=7, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib3: secondary bus 8
pcib3: subordinate bus 9
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xf4000000-0xf7ffffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci8: <ACPI PCI bus> on pcib3
pci8: physical bus=8
found-> vendor=0x1166, dev=0x0103, revid=0xc2
bus=8, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pcib4: secondary bus 9
pcib4: subordinate bus 9
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xf4000000-0xf7ffffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci9: <PCI bus> on pcib4
pci9: physical bus=9
found-> vendor=0x14e4, dev=0x164c, revid=0x11
bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base f4000000, size 25, enabled
pcib4: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib3: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib2: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib1: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib3: matched entry for 8.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: slot 0 INTA is routed to irq 16
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf4000000
bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bce0: bpf attached
bce0: Ethernet address: 00:13:72:60:ac:52
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
bce0: [MPSAFE]
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pcib5: secondary bus 10
pcib5: subordinate bus 10
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfff00000-0xfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci10: <ACPI PCI bus> on pcib5
pci10: physical bus=10
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pcib6: secondary bus 11
pcib6: subordinate bus 11
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xfff00000-0xfffff
pcib6: prefetched decode 0xfff00000-0xfffff
pci11: <PCI bus> on pcib6
pci11: physical bus=11
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib7: secondary bus 1
pcib7: subordinate bus 3
pcib7: I/O decode 0xf000-0xfff
pcib7: memory decode 0xfc600000-0xfc8fffff
pcib7: prefetched decode 0xd8000000-0xd80fffff
pci1: <ACPI PCI bus> on pcib7
pci1: physical bus=1
found-> vendor=0x8086, dev=0x0370, revid=0x00
bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0372, revid=0x00
bus=1, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib8: secondary bus 2
pcib8: subordinate bus 2
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0xfc700000-0xfc8fffff
pcib8: prefetched decode 0xd8000000-0xd80fffff
pci2: <ACPI PCI bus> on pcib8
pci2: physical bus=2
found-> vendor=0x1028, dev=0x0015, revid=0x00
bus=2, slot=14, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x01d6, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 3, range 32, base d80f0000, size 16, enabled
pcib8: (null) requested memory range 0xd80f0000-0xd80fffff: good
pcib7: (null) requested memory range 0xd80f0000-0xd80fffff: good
map[18]: type 1, range 32, base fc7e0000, size 17, enabled
pcib8: (null) requested memory range 0xfc7e0000-0xfc7fffff: good
pcib7: (null) requested memory range 0xfc7e0000-0xfc7fffff: good
pcib8: matched entry for 2.14.INTA
pcib8: slot 14 INTA hardwired to IRQ 78
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc7e0000-0xfc7fffff
irq 78 at
device 14.0 on pci2
mfi0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd80f0000
ioapic1: routing intpin 14 (PCI IRQ 78) to vector 50
mfi0: [MPSAFE]
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pcib9: secondary bus 3
pcib9: subordinate bus 3
pcib9: I/O decode 0xf000-0xfff
pcib9: memory decode 0xfff00000-0xfffff
pcib9: prefetched decode 0xfff00000-0xfffff
pci3: <PCI bus> on pcib9
pci3: physical bus=3
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib10: secondary bus 12
pcib10: subordinate bus 12
pcib10: I/O decode 0xf000-0xfff
pcib10: memory decode 0xfff00000-0xfffff
pcib10: prefetched decode 0xfff00000-0xfffff
pci12: <ACPI PCI bus> on pcib10
pci12: physical bus=12
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pcib11: secondary bus 13
pcib11: subordinate bus 13
pcib11: I/O decode 0xf000-0xfff
pcib11: memory decode 0xfff00000-0xfffff
pcib11: prefetched decode 0xfff00000-0xfffff
pci13: <PCI bus> on pcib11
pci13: physical bus=13
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib12: secondary bus 14
pcib12: subordinate bus 16
pcib12: I/O decode 0xe000-0xefff
pcib12: memory decode 0xfc300000-0xfc5fffff
pcib12: prefetched decode 0xfff00000-0xfffff
pci14: <ACPI PCI bus> on pcib12
pci14: physical bus=14
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=14, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=14, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci14
pcib13: secondary bus 15
pcib13: subordinate bus 15
pcib13: I/O decode 0xf000-0xfff
pcib13: memory decode 0xfff00000-0xfffff
pcib13: prefetched decode 0xfff00000-0xfffff
pci15: <ACPI PCI bus> on pcib13
pci15: physical bus=15
pcib14: <ACPI PCI-PCI bridge> at device 0.2 on pci14
pcib14: secondary bus 16
pcib14: subordinate bus 16
pcib14: I/O decode 0xe000-0xefff
pcib14: memory decode 0xfc400000-0xfc5fffff
pcib14: prefetched decode 0xfff00000-0xfffff
pci16: <ACPI PCI bus> on pcib14
pci16: physical bus=16
found-> vendor=0x9005, dev=0x00c0, revid=0x01
bus=16, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19
(6250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ec00, size 8, enabled
pcib14: (null) requested I/O range 0xec00-0xecff: in range
pcib12: (null) requested I/O range 0xec00-0xecff: in range
map[14]: type 1, range 64, base fc4ff000, size 12, enabled
pcib14: (null) requested memory range 0xfc4ff000-0xfc4fffff: good
pcib12: (null) requested memory range 0xfc4ff000-0xfc4fffff: good
pcib14: matched entry for 16.4.INTA
pcib14: slot 4 INTA hardwired to IRQ 224
found-> vendor=0x9005, dev=0x00c0, revid=0x01
bus=16, slot=4, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19
(6250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
pcib14: (null) requested I/O range 0xe800-0xe8ff: in range
pcib12: (null) requested I/O range 0xe800-0xe8ff: in range
map[14]: type 1, range 64, base fc4fe000, size 12, enabled
pcib14: (null) requested memory range 0xfc4fe000-0xfc4fefff: good
pcib12: (null) requested memory range 0xfc4fe000-0xfc4fefff: good
pcib14: matched entry for 16.4.INTB
pcib14: slot 4 INTB hardwired to IRQ 225
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xec00-0xecff mem
0xfc4ff000-0xfc4fffff irq 224 at device 4.0 on pci16
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00
ahc0: Enabling 39Bit Addressing
ahc0: Reading SEEPROM...done.
ahc0: Manual SE Termination
ahc0: BIOS eeprom is present
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 433 instructions downloaded
ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x29485560
ioapic3: routing intpin 0 (PCI IRQ 224) to vector 51
ahc0: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xe800-0xe8ff mem
0xfc4fe000-0xfc4fefff irq 225 at device 4.1 on pci16
ahc1: Defaulting to MEMIO off
ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
ahc1: Enabling 39Bit Addressing
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 433 instructions downloaded
ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x29485560
ioapic3: routing intpin 1 (PCI IRQ 225) to vector 52
ahc1: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib15: <PCI-PCI bridge> at device 7.0 on pci0
pcib15: secondary bus 17
pcib15: subordinate bus 17
pcib15: I/O decode 0xf000-0xfff
pcib15: memory decode 0xfff00000-0xfffff
pcib15: prefetched decode 0xfff00000-0xfffff
pci17: <PCI bus> on pcib15
pci17: physical bus=17
pcib16: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib16: secondary bus 4
pcib16: subordinate bus 5
pcib16: I/O decode 0xf000-0xfff
pcib16: memory decode 0xf8000000-0xfbffffff
pcib16: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib16
pci4: physical bus=4
found-> vendor=0x1166, dev=0x0103, revid=0xc2
bus=4, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib17: <PCI-PCI bridge> at device 0.0 on pci4
pcib17: secondary bus 5
pcib17: subordinate bus 5
pcib17: I/O decode 0xf000-0xfff
pcib17: memory decode 0xf8000000-0xfbffffff
pcib17: prefetched decode 0xfff00000-0xfffff
pci5: <PCI bus> on pcib17
pci5: physical bus=5
found-> vendor=0x14e4, dev=0x164c, revid=0x11
bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base f8000000, size 25, enabled
pcib17: (null) requested memory range 0xf8000000-0xf9ffffff: good
pcib16: (null) requested memory range 0xf8000000-0xf9ffffff: good
pcib16: matched entry for 4.0.INTA
pcib16: slot 0 INTA hardwired to IRQ 16
pcib17: slot 0 INTA is routed to irq 16
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf8000000
bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bce1: bpf attached
bce1: Ethernet address: 00:13:72:60:ac:50
bce1: [MPSAFE]
uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at
device 29.0
on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcce0
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at
device 29.1
on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xccc0
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at
device 29.2
on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcca0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900400-0xfc9007ff irq
21 at
device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfc900400
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
ukbd0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
umass0:2:0:-1: Attached to scbus2
umass1: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
umass1:3:1:-1: Attached to scbus3
uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 5
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
ukbd1: Dell Dell USB Keyboard, rev 1.10/3.01, addr 6, iclass 3/1
kbd2 at ukbd1
kbd2: ukbd1, generic (0), config:0x0, flags:0x3d0000
pcib18: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib18: secondary bus 18
pcib18: subordinate bus 18
pcib18: I/O decode 0xd000-0xdfff
pcib18: memory decode 0xfc100000-0xfc2fffff
pcib18: prefetched decode 0xd0000000-0xd7ffffff
pcib18: Subtractively decoded bridge.
pci18: <ACPI PCI bus> on pcib18
pci18: physical bus=18
found-> vendor=0x1002, dev=0x515e, revid=0x02
bus=18, slot=13, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=6
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib18: (null) requested memory range 0xd0000000-0xd7ffffff: good
map[14]: type 4, range 32, base 0000dc00, size 8, enabled
pcib18: (null) requested I/O range 0xdc00-0xdcff: in range
map[18]: type 1, range 32, base fc1f0000, size 16, enabled
pcib18: (null) requested memory range 0xfc1f0000-0xfc1fffff: good
pcib18: matched entry for 18.13.INTA
pcib18: slot 13 INTA hardwired to IRQ 19
pci18: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
atapci1: <Intel 63XXESB2 SATA300 controller> port
0xcc98-0xcc9f,0xcc90-0xcc93,0xcc80-0xcc87,0xcc78-0xcc7b,0xcc60-0xcc6f
mem
0xfc900000-0xfc9003ff irq 23 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc60
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 57
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc98
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcc90
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc80
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcc78
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: irq maps: 0x4c61 0x4c71 0x4c61 0x4c61
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio1: irq maps: 0x4c61 0x4c69 0x4c61 0x4c61
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 59
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132662 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 83125179 hz
Timecounter "TSC" frequency 2992523346 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
disabled,
default to accept, logging unlimited
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 63XXESB2 chip
acd0: setting UDMA33 on 63XXESB2 chip
acd0: <TEAC CD-ROM CD-224E-N/3.AB> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 2 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
mfi0: 4265 - PCI 0x041028 0x0415 0x041028 0x041f03: Firmware
initialization
started (PCI ID 0015/1028/1f03/1028)
mfi0: 4266 - Type 18: Firmware version 1.00.01-0088
mfi0: 4267 - Battery Present
mfi0: 4268 - PD 08(e1/s255) event: Enclosure (SES) discovered on PD
08(e1/s255)
mfi0: 4269 - PD 08(e1/s255) event: Inserted: PD 08(e1/s255)
mfi0: 4270 - Type 29: Inserted: PD 08(e1/s255) Info: enclPd=08,
scsiType=d,
portMap=00, sasAddr=5001302062530c00,0000000000000000
mfi0: 4271 - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 4272 - Type 29: Inserted: PD 00(e1/s0) Info: enclPd=08,
scsiType=0,
portMap=01, sasAddr=500000e011eeda62,0000000000000000
mfi0: 4273 - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
mfi0: 4274 - Type 29: Inserted: PD 01(e1/s1) Info: enclPd=08,
scsiType=0,
portMap=02, sasAddr=500000e011eecd12,0000000000000000
mfi0: 4275 - PD 02(e1/s2) event: Inserted: PD 02(e1/s2)
mfi0: 4276 - Type 29: Inserted: PD 02(e1/s2) Info: enclPd=08,
scsiType=0,
portMap=04, sasAddr=500000e0120fe632,0000000000000000
mfid0: <MFI Logical Disk> on mfi0
mfid0: 34176MB (69992448 sectors) RAID
mfi0: 4277 - PD 03(e1/s3) event: Inserted: PD 03(e1/s3)
mfi0: 4278 - Type 29: Inserted: PD 03(e1/s3) Info: enclPd=08,
scsiType=0,
portMap=08, sasAddr=500000e0120fe412,0000000000000000
mfi0: 4279 - PD 04(e1/s4) event: Inserted: PD 04(e1/s4)
mfi0: 4280 - Type 29: Inserted: PD 04(e1/s4) Info: enclPd=08,
scsiType=0,
portMap=10, sasAddr=500000e0120fdee2,0000000000000000
mfid1: <MFI Logical Disk> on mfi0
mfid1: 138752MB (284164096 sectors) RAID
mfi0: 4281 - PD 05(e1/s5) event: Inserted: PD 05(e1/s5)
mfi0: 4282 - Type 29: Inserted: PD 05(e1/s5) Info: enclPd=08,
scsiType=0,
portMap=20, sasAddr=500000e0120f5db2,0000000000000000
mfi0: 4283 - Type 22: Global Hot Spare created on PD 05(e1/s5)
(global,rev)
mfi0: 4284 - PD 05(e1/s5) state prior 0 new 2: State change on PD
05(e1/s5)
from UNCONFIGURED_GOOD(0) to HOT SPARE(2)
mfi0: 4285 - Adapter ticks 212091608 elapsed 59s: Time established as
09/20/06
18:20:08; (59 seconds since power on)
mfi0: 4286 - PCI 0x041028 0x0415 0x041028 0x041f03: Firmware
initialization
started (PCI ID 0015/1028/1f03/1028)
mfi0: 4287 - Type 18: Firmware version 1.00.01-0088
mfi0: 4288 - Battery Present
mfi0: 4289 - PD 08(e1/s255) event: Enclosure (SES) discovered on PD
08(e1/s255)
mfi0: 4290 - PD 08(e1/s255) event: Inserted: PD 08(e1/s255)
mfi0: 4291 - Type 29: Inserted: PD 08(e1/s255) Info: enclPd=08,
scsiType=d,
portMap=00, sasAddr=5001302062530c00,0000000000000000
mfi0: 4292 - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 4293 - Type 29: Inserted: PD 00(e1/s0) Info: enclPd=08,
scsiType=0,
portMap=01, sasAddr=500000e011eeda62,0000000000000000
mfi0: 4294 - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
Gmfi0: 4295 - Type 29: Inserted: PD 01(e1/s1) Info: enclPd=08,
scsiType=0,
portMap=02, sasAddr=500000e011eecd12,0000000000000000
Emfi0: 4296 - PD 02(e1/s2) event: Inserted: PD 02(e1/s2)
Omfi0: 4297 - Type 29: Inserted: PD 02(e1/s2) Info: enclPd=08,
scsiType=0,
portMap=04, sasAddr=500000e0120fe632,0000000000000000
Mmfi0: 4298 - PD 03(e1/s3) event: Inserted: PD 03(e1/s3)
:mfi0: 4299 - Type 29: Inserted: PD 03(e1/s3) Info: enclPd=08,
scsiType=0,
portMap=08, sasAddr=500000e0120fe412,0000000000000000
mfi0: 4300 - PD 04(e1/s4) event: Inserted: PD 04(e1/s4)
nmfi0: 4301 - Type 29: Inserted: PD 04(e1/s4) Info: enclPd=08,
scsiType=0,
portMap=10, sasAddr=500000e0120fdee2,0000000000000000
emfi0: 4302 - PD 05(e1/s5) event: Inserted: PD 05(e1/s5)
wmfi0: 4303 - Type 29: Inserted: PD 05(e1/s5) Info: enclPd=08,
scsiType=0,
portMap=20, sasAddr=500000e0120f5db2,0000000000000000
mfi0: 4304 - Type 22: Global Hot Spare created on PD 05(e1/s5)
(global,rev)
mfi0: 4305 - PD 05(e1/s5) state prior 0 new 2: State change on PD
05(e1/s5)
from UNCONFIGURED_GOOD(0) to HOT SPARE(2)
mfi0: 4306 - Adapter ticks 212091734 elapsed 60s: Time established as
09/20/06
18:22:14; (60 seconds since power on)
mf~
This is a boot sequence against the LSI Logic card.
FreeBSD/i386 bootstrap loader, Revision 1.1
(root at Elmer.dco.penx.com, Wed Sep 20 03:00:51 MDT 2006)
Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x610808
data=0xd6bb8+0x6c988 syms=[0x8+0x98bc8+0x8+0x7ffac]
SMAP type=01 base=0000000000100000 len=000000007fea8000
SMAP type=03 base=000000007ffa8000 len=000000000000fc00
SMAP type=02 base=000000007ffb7c00 len=0000000000048400
SMAP type=02 base=00000000e0000000 len=0000000010000000
SMAP type=02 base=00000000fe000000 len=0000000002000000
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.2-PRERELEASE #7: Wed Sep 20 17:34:53 MDT 2006
root at Elmer:/usr/src/sys/amd64/compile/ELMER
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a6e000.
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <DELL PE_SC3 >
Calibrating clock(s) ... i8254 clock: 1193165 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2992518432 Hz
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.52-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf64 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
Logical CPUs per core: 2
real memory = 2147123200 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000b6b000 - 0x000000007c35afff, 2071920640 bytes (505840 pages)
avail memory = 2061656064 (1966 MB)
INTR: Adding local APIC 2 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 5, Interrupt 64 at 0xfec81000
ioapic1: Changing APIC ID to 5
ioapic1: WARNING: intbase 64 != expected base 24
ioapic1: intpin 0 -> PCI IRQ 64 (level, low)
ioapic1: intpin 1 -> PCI IRQ 65 (level, low)
ioapic1: intpin 2 -> PCI IRQ 66 (level, low)
ioapic1: intpin 3 -> PCI IRQ 67 (level, low)
ioapic1: intpin 4 -> PCI IRQ 68 (level, low)
ioapic1: intpin 5 -> PCI IRQ 69 (level, low)
ioapic1: intpin 6 -> PCI IRQ 70 (level, low)
ioapic1: intpin 7 -> PCI IRQ 71 (level, low)
ioapic1: intpin 8 -> PCI IRQ 72 (level, low)
ioapic1: intpin 9 -> PCI IRQ 73 (level, low)
ioapic1: intpin 10 -> PCI IRQ 74 (level, low)
ioapic1: intpin 11 -> PCI IRQ 75 (level, low)
ioapic1: intpin 12 -> PCI IRQ 76 (level, low)
ioapic1: intpin 13 -> PCI IRQ 77 (level, low)
ioapic1: intpin 14 -> PCI IRQ 78 (level, low)
ioapic1: intpin 15 -> PCI IRQ 79 (level, low)
ioapic1: intpin 16 -> PCI IRQ 80 (level, low)
ioapic1: intpin 17 -> PCI IRQ 81 (level, low)
ioapic1: intpin 18 -> PCI IRQ 82 (level, low)
ioapic1: intpin 19 -> PCI IRQ 83 (level, low)
ioapic1: intpin 20 -> PCI IRQ 84 (level, low)
ioapic1: intpin 21 -> PCI IRQ 85 (level, low)
ioapic1: intpin 22 -> PCI IRQ 86 (level, low)
ioapic1: intpin 23 -> PCI IRQ 87 (level, low)
MADT: Found IO APIC ID 6, Interrupt 160 at 0xfec84000
ioapic2: Changing APIC ID to 6
ioapic2: WARNING: intbase 160 != expected base 88
ioapic2: intpin 0 -> PCI IRQ 160 (level, low)
ioapic2: intpin 1 -> PCI IRQ 161 (level, low)
ioapic2: intpin 2 -> PCI IRQ 162 (level, low)
ioapic2: intpin 3 -> PCI IRQ 163 (level, low)
ioapic2: intpin 4 -> PCI IRQ 164 (level, low)
ioapic2: intpin 5 -> PCI IRQ 165 (level, low)
ioapic2: intpin 6 -> PCI IRQ 166 (level, low)
ioapic2: intpin 7 -> PCI IRQ 167 (level, low)
ioapic2: intpin 8 -> PCI IRQ 168 (level, low)
ioapic2: intpin 9 -> PCI IRQ 169 (level, low)
ioapic2: intpin 10 -> PCI IRQ 170 (level, low)
ioapic2: intpin 11 -> PCI IRQ 171 (level, low)
ioapic2: intpin 12 -> PCI IRQ 172 (level, low)
ioapic2: intpin 13 -> PCI IRQ 173 (level, low)
ioapic2: intpin 14 -> PCI IRQ 174 (level, low)
ioapic2: intpin 15 -> PCI IRQ 175 (level, low)
ioapic2: intpin 16 -> PCI IRQ 176 (level, low)
ioapic2: intpin 17 -> PCI IRQ 177 (level, low)
ioapic2: intpin 18 -> PCI IRQ 178 (level, low)
ioapic2: intpin 19 -> PCI IRQ 179 (level, low)
ioapic2: intpin 20 -> PCI IRQ 180 (level, low)
ioapic2: intpin 21 -> PCI IRQ 181 (level, low)
ioapic2: intpin 22 -> PCI IRQ 182 (level, low)
ioapic2: intpin 23 -> PCI IRQ 183 (level, low)
MADT: Found IO APIC ID 7, Interrupt 224 at 0xfec84800
ioapic3: Changing APIC ID to 7
ioapic3: WARNING: intbase 224 != expected base 184
ioapic3: intpin 0 -> PCI IRQ 224 (level, low)
ioapic3: intpin 1 -> PCI IRQ 225 (level, low)
ioapic3: intpin 2 -> PCI IRQ 226 (level, low)
ioapic3: intpin 3 -> PCI IRQ 227 (level, low)
ioapic3: intpin 4 -> PCI IRQ 228 (level, low)
ioapic3: intpin 5 -> PCI IRQ 229 (level, low)
ioapic3: intpin 6 -> PCI IRQ 230 (level, low)
ioapic3: intpin 7 -> PCI IRQ 231 (level, low)
ioapic3: intpin 8 -> PCI IRQ 232 (level, low)
ioapic3: intpin 9 -> PCI IRQ 233 (level, low)
ioapic3: intpin 10 -> PCI IRQ 234 (level, low)
ioapic3: intpin 11 -> PCI IRQ 235 (level, low)
ioapic3: intpin 12 -> PCI IRQ 236 (level, low)
ioapic3: intpin 13 -> PCI IRQ 237 (level, low)
ioapic3: intpin 14 -> PCI IRQ 238 (level, low)
ioapic3: intpin 15 -> PCI IRQ 239 (level, low)
ioapic3: intpin 16 -> PCI IRQ 240 (level, low)
ioapic3: intpin 17 -> PCI IRQ 241 (level, low)
ioapic3: intpin 18 -> PCI IRQ 242 (level, low)
ioapic3: intpin 19 -> PCI IRQ 243 (level, low)
ioapic3: intpin 20 -> PCI IRQ 244 (level, low)
ioapic3: intpin 21 -> PCI IRQ 245 (level, low)
ioapic3: intpin 22 -> PCI IRQ 246 (level, low)
ioapic3: intpin 23 -> PCI IRQ 247 (level, low)
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 5
MADT: Ignoring local NMI routed to ACPI CPU 6
MADT: Ignoring local NMI routed to ACPI CPU 7
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
ioapic2 <Version 2.0> irqs 160-183 on motherboard
ioapic3 <Version 2.0> irqs 224-247 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd0 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Sep 20 2006 17:32:55)
acpi0: <DELL PE_SC3> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80126814
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25c08086)
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 16 func 1
AcpiOsDerivePciId: bus 0 dev 16 func 0
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 10 11 12
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 10 11 12
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x25c0, revid=0x12
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e2, revid=0x12
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x25e3, revid=0x12
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x25f8, revid=0x12
bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x25e5, revid=0x12
bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f9, revid=0x12
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x25e7, revid=0x12
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x12
bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x12
bus=0, slot=16, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x12
bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f1, revid=0x12
bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f3, revid=0x12
bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f5, revid=0x12
bus=0, slot=21, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f6, revid=0x12
bus=0, slot=22, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2690, revid=0x09
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x2688, revid=0x09
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000cce0, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2689, revid=0x09
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 0000ccc0, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 20
found-> vendor=0x8086, dev=0x268a, revid=0x09
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 0000cca0, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 21
found-> vendor=0x8086, dev=0x268c, revid=0x09
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fc900400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x244e, revid=0xd9
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2670, revid=0x09
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x269e, revid=0x09
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x8086, dev=0x2680, revid=0x09
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=6
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000cc98, size 3, enabled
map[14]: type 4, range 32, base 0000cc90, size 2, enabled
map[18]: type 4, range 32, base 0000cc80, size 3, enabled
map[1c]: type 4, range 32, base 0000cc78, size 2, enabled
map[20]: type 4, range 32, base 0000cc60, size 4, enabled
map[24]: type 1, range 32, base fc900000, size 10, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 23
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: secondary bus 6
pcib1: subordinate bus 11
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf2000000-0xf7ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib1
pci6: physical bus=6
found-> vendor=0x8086, dev=0x3500, revid=0x01
bus=6, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x350c, revid=0x01
bus=6, slot=0, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pcib2: secondary bus 7
pcib2: subordinate bus 10
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xf4000000-0xf7ffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci7: <ACPI PCI bus> on pcib2
pci7: physical bus=7
found-> vendor=0x8086, dev=0x3510, revid=0x01
bus=7, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x3514, revid=0x01
bus=7, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib3: secondary bus 8
pcib3: subordinate bus 9
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xf4000000-0xf7ffffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci8: <ACPI PCI bus> on pcib3
pci8: physical bus=8
found-> vendor=0x1166, dev=0x0103, revid=0xc2
bus=8, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pcib4: secondary bus 9
pcib4: subordinate bus 9
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xf4000000-0xf7ffffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci9: <PCI bus> on pcib4
pci9: physical bus=9
found-> vendor=0x14e4, dev=0x164c, revid=0x11
bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base f4000000, size 25, enabled
pcib4: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib3: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib2: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib1: (null) requested memory range 0xf4000000-0xf5ffffff: good
pcib3: matched entry for 8.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: slot 0 INTA is routed to irq 16
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf4000000
bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bce0: bpf attached
bce0: Ethernet address: 00:13:72:60:ac:52
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
bce0: [MPSAFE]
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pcib5: secondary bus 10
pcib5: subordinate bus 10
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfff00000-0xfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci10: <ACPI PCI bus> on pcib5
pci10: physical bus=10
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pcib6: secondary bus 11
pcib6: subordinate bus 11
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xfff00000-0xfffff
pcib6: prefetched decode 0xfff00000-0xfffff
pci11: <PCI bus> on pcib6
pci11: physical bus=11
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib7: secondary bus 1
pcib7: subordinate bus 3
pcib7: I/O decode 0xf000-0xfff
pcib7: memory decode 0xfc600000-0xfc8fffff
pcib7: prefetched decode 0xd8000000-0xd80fffff
pci1: <ACPI PCI bus> on pcib7
pci1: physical bus=1
found-> vendor=0x8086, dev=0x0370, revid=0x00
bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0372, revid=0x00
bus=1, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib8: secondary bus 2
pcib8: subordinate bus 2
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0xfc700000-0xfc8fffff
pcib8: prefetched decode 0xd8000000-0xd80fffff
pci2: <ACPI PCI bus> on pcib8
pci2: physical bus=2
found-> vendor=0x1028, dev=0x0015, revid=0x00
bus=2, slot=14, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x01d6, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 3, range 32, base d80f0000, size 16, enabled
pcib8: (null) requested memory range 0xd80f0000-0xd80fffff: good
pcib7: (null) requested memory range 0xd80f0000-0xd80fffff: good
map[18]: type 1, range 32, base fc7e0000, size 17, enabled
pcib8: (null) requested memory range 0xfc7e0000-0xfc7fffff: good
pcib7: (null) requested memory range 0xfc7e0000-0xfc7fffff: good
pcib8: matched entry for 2.14.INTA
pcib8: slot 14 INTA hardwired to IRQ 78
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc7e0000-0xfc7fffff
irq 78 at
device 14.0 on pci2
mfi0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd80f0000
ioapic1: routing intpin 14 (PCI IRQ 78) to vector 50
mfi0: [MPSAFE]
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pcib9: secondary bus 3
pcib9: subordinate bus 3
pcib9: I/O decode 0xf000-0xfff
pcib9: memory decode 0xfff00000-0xfffff
pcib9: prefetched decode 0xfff00000-0xfffff
pci3: <PCI bus> on pcib9
pci3: physical bus=3
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib10: secondary bus 12
pcib10: subordinate bus 12
pcib10: I/O decode 0xf000-0xfff
pcib10: memory decode 0xfff00000-0xfffff
pcib10: prefetched decode 0xfff00000-0xfffff
pci12: <ACPI PCI bus> on pcib10
pci12: physical bus=12
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pcib11: secondary bus 13
pcib11: subordinate bus 13
pcib11: I/O decode 0xf000-0xfff
pcib11: memory decode 0xfff00000-0xfffff
pcib11: prefetched decode 0xfff00000-0xfffff
pci13: <PCI bus> on pcib11
pci13: physical bus=13
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib12: secondary bus 14
pcib12: subordinate bus 16
pcib12: I/O decode 0xe000-0xefff
pcib12: memory decode 0xfc300000-0xfc5fffff
pcib12: prefetched decode 0xfff00000-0xfffff
pci14: <ACPI PCI bus> on pcib12
pci14: physical bus=14
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=14, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=14, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci14
pcib13: secondary bus 15
pcib13: subordinate bus 15
pcib13: I/O decode 0xf000-0xfff
pcib13: memory decode 0xfff00000-0xfffff
pcib13: prefetched decode 0xfff00000-0xfffff
pci15: <ACPI PCI bus> on pcib13
pci15: physical bus=15
pcib14: <ACPI PCI-PCI bridge> at device 0.2 on pci14
pcib14: secondary bus 16
pcib14: subordinate bus 16
pcib14: I/O decode 0xe000-0xefff
pcib14: memory decode 0xfc400000-0xfc5fffff
pcib14: prefetched decode 0xfff00000-0xfffff
pci16: <ACPI PCI bus> on pcib14
pci16: physical bus=16
found-> vendor=0x1000, dev=0x0030, revid=0xc1
bus=16, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x10 (4000 ns), maxlat=0x06
(1500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 4, range 32, base 0000ec00, size 8, enabled
pcib14: (null) requested I/O range 0xec00-0xecff: in range
pcib12: (null) requested I/O range 0xec00-0xecff: in range
map[14]: type 1, range 64, base fc4e0000, size 17, enabled
pcib14: (null) requested memory range 0xfc4e0000-0xfc4fffff: good
pcib12: (null) requested memory range 0xfc4e0000-0xfc4fffff: good
map[1c]: type 1, range 64, base fc4c0000, size 17, enabled
pcib14: (null) requested memory range 0xfc4c0000-0xfc4dffff: good
pcib12: (null) requested memory range 0xfc4c0000-0xfc4dffff: good
pcib14: matched entry for 16.4.INTA
pcib14: slot 4 INTA hardwired to IRQ 224
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem
0xfc4e0000-0xfc4fffff,0xfc4c0000-0xfc4dffff irq 224 at device 4.0 on
pci16
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00
mpt0: Reserved 0x20000 bytes for rid 0x14 type 3 at 0xfc4e0000
ioapic3: routing intpin 0 (PCI IRQ 224) to vector 51
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.12.0
pcib15: <PCI-PCI bridge> at device 7.0 on pci0
pcib15: secondary bus 17
pcib15: subordinate bus 17
pcib15: I/O decode 0xf000-0xfff
pcib15: memory decode 0xfff00000-0xfffff
pcib15: prefetched decode 0xfff00000-0xfffff
pci17: <PCI bus> on pcib15
pci17: physical bus=17
pcib16: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib16: secondary bus 4
pcib16: subordinate bus 5
pcib16: I/O decode 0xf000-0xfff
pcib16: memory decode 0xf8000000-0xfbffffff
pcib16: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib16
pci4: physical bus=4
found-> vendor=0x1166, dev=0x0103, revid=0xc2
bus=4, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib17: <PCI-PCI bridge> at device 0.0 on pci4
pcib17: secondary bus 5
pcib17: subordinate bus 5
pcib17: I/O decode 0xf000-0xfff
pcib17: memory decode 0xf8000000-0xfbffffff
pcib17: prefetched decode 0xfff00000-0xfffff
pci5: <PCI bus> on pcib17
pci5: physical bus=5
found-> vendor=0x14e4, dev=0x164c, revid=0x11
bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base f8000000, size 25, enabled
pcib17: (null) requested memory range 0xf8000000-0xf9ffffff: good
pcib16: (null) requested memory range 0xf8000000-0xf9ffffff: good
pcib16: matched entry for 4.0.INTA
pcib16: slot 0 INTA hardwired to IRQ 16
pcib17: slot 0 INTA is routed to irq 16
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf8000000
bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bce1: bpf attached
bce1: Ethernet address: 00:13:72:60:ac:50
bce1: [MPSAFE]
uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at
device 29.0
on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcce0
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 52
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at
device 29.1
on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xccc0
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at
device 29.2
on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcca0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900400-0xfc9007ff irq
21 at
device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfc900400
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
ukbd0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
umass0:1:0:-1: Attached to scbus1
umass1: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
umass1:2:1:-1: Attached to scbus2
uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 5
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
ukbd1: Dell Dell USB Keyboard, rev 1.10/3.01, addr 6, iclass 3/1
kbd2 at ukbd1
kbd2: ukbd1, generic (0), config:0x0, flags:0x3d0000
pcib18: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib18: secondary bus 18
pcib18: subordinate bus 18
pcib18: I/O decode 0xd000-0xdfff
pcib18: memory decode 0xfc100000-0xfc2fffff
pcib18: prefetched decode 0xd0000000-0xd7ffffff
pcib18: Subtractively decoded bridge.
pci18: <ACPI PCI bus> on pcib18
pci18: physical bus=18
found-> vendor=0x1002, dev=0x515e, revid=0x02
bus=18, slot=13, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib18: (null) requested memory range 0xd0000000-0xd7ffffff: good
map[14]: type 4, range 32, base 0000dc00, size 8, enabled
pcib18: (null) requested I/O range 0xdc00-0xdcff: in range
map[18]: type 1, range 32, base fc1f0000, size 16, enabled
pcib18: (null) requested memory range 0xfc1f0000-0xfc1fffff: good
pcib18: matched entry for 18.13.INTA
pcib18: slot 13 INTA hardwired to IRQ 19
pci18: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
atapci1: <Intel 63XXESB2 SATA300 controller> port
0xcc98-0xcc9f,0xcc90-0xcc93,0xcc80-0xcc87,0xcc78-0xcc7b,0xcc60-0xcc6f
mem
0xfc900000-0xfc9003ff irq 23 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc60
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 56
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc98
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcc90
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc80
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcc78
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: irq maps: 0x4c61 0x4c71 0x4c61 0x4c61
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio1: irq maps: 0x4c61 0x4c69 0x4c61 0x4c61
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xccfff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132662 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 83125295 hz
Timecounter "TSC" frequency 2992518432 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
disabled,
default to accept, logging unlimited
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 63XXESB2 chip
acd0: setting UDMA33 on 63XXESB2 chip
acd0: <TEAC CD-ROM CD-224E-N/3.AB> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 2 seconds for SCSI devices to settle
mpt0: Issuing TMF 0xffffffff86abf160:94 with MsgContext of 0x20004
More information about the freebsd-hardware
mailing list