SMART threshold exceeded
Mike Tancsa
mike at sentex.net
Sun Mar 27 11:08:07 PST 2005
On Sat, 26 Mar 2005 21:19:31 -0800, in sentex.lists.freebsd.hardware
you wrote:
>i suspect that this
>
> twe0: AEN: <twe0: port 0: SMART threshold exceeded>
>
>is not a good sign. googling tells me it's a failure, but
>not whether it is soft or hard.
The disk on Port 0 in this case. The smartmontools can speak to
disks behind a 3ware both on RELENG_4 and RELENG_5 to get more info.
smartctl -a -d 3ware,0 /dev/twed1
or to talk to the disk on port 1
smartctl -a -d 3ware,1 /dev/twed1
eg
backup2# smartctl -a -d 3ware,0 /dev/twed1
smartctl version 5.33 [i386-unknown-freebsd4.9] Copyright (C) 2002-4
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST380011A
Serial Number: 3JV3WT64
Firmware Version: 3.16
User Capacity: 80,000,000,000 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Sun Mar 27 14:03:21 2005 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection
activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline
immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection
upon new
command.
Offline surface scan
supported.
Self-test supported.
No Conveyance Self-test
supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before
entering
power-saving mode.
Supports SMART auto save
timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging
support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 063 060 006 Pre-fail
Always - 15260897
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail
Always - 116204100
9 Power_On_Hours 0x0032 089 089 000 Old_age
Always - 10357
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 30
194 Temperature_Celsius 0x0022 042 049 000 Old_age
Always - 42
195 Hardware_ECC_Recovered 0x001a 063 060 000 Old_age
Always - 15260897
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9451
-
# 2 Short offline Completed without error 00% 9427
-
# 3 Short offline Completed without error 00% 9404
-
# 4 Short offline Completed without error 00% 9380
-
# 5 Short offline Completed without error 00% 9357
-
# 6 Short offline Completed without error 00% 9333
-
# 7 Short offline Completed without error 00% 9309
-
# 8 Short offline Completed without error 00% 9286
-
# 9 Short offline Completed without error 00% 9262
-
#10 Short offline Completed without error 00% 9239
-
#11 Short offline Completed without error 00% 9215
-
#12 Short offline Completed without error 00% 9192
-
#13 Short offline Completed without error 00% 9168
-
#14 Short offline Completed without error 00% 9144
-
#15 Short offline Completed without error 00% 9121
-
#16 Short offline Completed without error 00% 9097
-
#17 Short offline Completed without error 00% 9074
-
#18 Short offline Completed without error 00% 9050
-
#19 Short offline Completed without error 00% 9027
-
#20 Short offline Completed without error 00% 9003
-
#21 Short offline Completed without error 00% 8980
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute
delay.
backup2#
--------------------------------------------------------
Mike Tancsa, Sentex communications http://www.sentex.net
Providing Internet Access since 1994
mike at sentex.net, (http://www.tancsa.com)
More information about the freebsd-hardware
mailing list