Booting with Promise FastTrak S150 SX4-M
John Angelmo
john at veidit.net
Wed Jul 27 13:30:16 GMT 2005
Dag-Erling Smørgrav wrote:
> John Angelmo <john at veidit.net> writes:
>
>>is it possible to get the S150 SX4-M working with FreeBSD (stable or
>>current)?
>
>
> Mine works fine (with four Maxtor 6B300S0 disks) under both 6.0 and
> 7.0. Note that RAID5 isn't supported yet, though.
>
> DES
Hmm what could I be missing?
This is the atastuff of DMSG
atapci0: <Promise PDC20622 SATA150 controller> port
0xec00-0xecff,0xe800-0xe8ff,0xe400-0xe4ff mem
0xdff00000-0xdfffffff,0xdfef8000-0xdfefffff irq 17 at device 6.0 on pci0
atapci0: DIMM size 64MB @ 0x00000000 ECC enabled
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
ata5: <ATA channel 3> on atapci0
atapci1: <VIA 6420 SATA150 controller> port
0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807,0xd400-0xd403,0xd000-0xd00f,0xcc00-0xccff
irq 20 at device 15.0 on pci0
ata6: <ATA channel 0> on atapci1
ata7: <ATA channel 1> on atapci1
atapci2: <VIA 8237 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
But now I have no installed drives on my promise card
/John
More information about the freebsd-hardware
mailing list