Sony DSC P73 and umass failed (CBI reset failed, STALLED)

[Manuel Rabade Garcia]

Hi everyone, i buy a Sony DSC P73 Digital Camera wich supports USB
Normal mode (as a 'standard' storage device), PTP mode and Picture
Bridge (for other Sony devices i think).

I use FreeBSD 5.2.1 (see dmesg above) and when i connect it the umass
fails to detect the storage device and kernel says:

umass0: Sony Sony DSC, rev 2.00/5.00, addr 2
umass0: CBI reset failed, STALLED
umass0: CBI reset failed, STALLED
umass0: CBI reset failed, STALLED
umass0: CBI reset failed, STALLED
umass0: CBI reset failed, STALLED

The output of 'usbdevs -v' is:

mig at fulcrum:~$ usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 addr 2: low speed, power 100 mA, config 1, Microsoft Trackball Explorer®(0x0024), Microsoft(0x045e), rev 1.21
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 addr 2: full speed, self powered, config 1, Sony DSC(0x0010), Sony(0x054c), rev 5.00
 port 2 powered

I wan to send a pr but i don't know what other information could be
useful (the dmesg and usbdevs i think are not enough), i am very
interested in coperating to get it working :).

Thanks to everyone and keep up the good work :)

-- 
Manuel Rabade Garcia
 WWW - http://mig-29.net
 GPG - 1024D/AA3325C0 2002-09-30
 Fingerprint - D2E5 76E1 CE2D 8783 545D  1F41 399B 5765 AA33 25C0
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p5 #0: Tue Apr 20 13:36:34 CDT 2004
    root@:/usr/obj/usr/src/sys/FULCRUM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b4e000.
Preloaded elf module "/boot/modules/linux.ko" at 0xc0b4e1cc.
Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc0b4e278.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0b4e2c0.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc0b4e36c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1993.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536748032 (511 MB)
avail memory = 511143936 (487 MB)
netsmb_dev: loaded
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc0877782 (1000022)
VESA: NVidia
ACPI: DSDT was overridden.
    ACPI-0375: *** Info: Table [DSDT] replaced by host OS
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   CPi R  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fbb90
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTC is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce4 440 Go> mem 0xdff80000-0xdfffffff,0xe0000000-0xe7ffffff,0xfc000000-0xfcffffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft Trackball Explorer®, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 11
pcib2: slot 1 INTA is routed to irq 11
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2
xl0: Ethernet address: 00:08:74:e5:9e:ba
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: slot 1 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: slot 1 INTA is routed to irq 11
cbb1: [MPSAFE]
fwohci0: <Texas Instruments PCI4451> mem 0xf8ff8000-0xf8ffbfff,0xf8fff000-0xf8fff7ff irq 11 at device 1.2 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 32:4f:c0:00:08:40:d8:41
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:40:d8:41
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <Intel ICH3 (82801CA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at device 31.5 on pci0
pcm0: <Cirrus Logic CS4205 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
speaker0 port 0x67,0x65,0x63,0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1993540572 Hz quality 800
Timecounters tick every 1.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad0 dp=0xcbfa8660
ad0: 38154MB <IC25N040ATCS05-0> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <Samsung CD-RW/DVD-ROM SN-324B> at ata0-slave PIO4
GEOM: create disk cd0 dp=0xcc0d4e00
cd0 at ata0 bus 0 target 1 lun 0
cd0: <SAMSUNG CDRW/DVD SN-324B U101> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [3581894 x 2048 byte records]
Mounting root from ufs:/dev/ad0s4a
Warning: pid 634 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 716 used static ldt allocation.
See the i386_set_ldt man page for more info
uscanner0: Hewlett-Packard HP ScanJet 5200C, rev 1.00/1.00, addr 2
Warning: pid 1016 used static ldt allocation.
See the i386_set_ldt man page for more info
smb_maperror: Unmapped error 1:158
Warning: pid 2826 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 2832 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 2838 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 2865 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 2870 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 2876 used static ldt allocation.
See the i386_set_ldt man page for more info
uscanner0: at uhub1 port 1 (addr 2) disconnected
uscanner0: detached
umass0: Sony Sony DSC, rev 2.00/5.00, addr 2
umass0: CBI reset failed, STALLED
umass0: CBI reset failed, STALLED
umass0: CBI reset failed, STALLED
umass0: CBI reset failed, STALLED
umass0: CBI reset failed, STALLED