Performance problems with a Via Rhine II and a rtl8139C NIC on
a Via Epia MB
Tony Frank
tfrank at optushome.com.au
Tue Feb 10 03:29:30 PST 2004
Hi,
On Mon, Feb 09, 2004 at 11:10:26PM +0100, Guido Winkelmann wrote:
> > Have you checked that you have the NIC setup for same speed/duplex as your
> > switch/hub/other pc ?
> The autonegotiated setting for the card is 100baseTX <full-duplex>, according
> to ifconfig, which is the same setting all the other cards connected to that
> switch are using.
I meant check that the port on the switch is running in 100 full duplex.
If the switch port is half-duplex mode you will likely run into collisions or
similar.
Perhaps a 'netstat -i' will show if you are having errors on your interface?
Tony
More information about the freebsd-hardware
mailing list