1u rackmount servers.

[Lanny Baron]

Hi,
Take a look at http://www.FreeBSDsystems.com/servers_1420.html that has
on-board ATA RAID (0 or 1) and for SCSI
http://www.FreeBSDsystems.com/servers_1740.html

Regards,
Lanny

akanwar at digitarchy.com said:
> Hi all,
>
> I am looking for user recommendations for 1u rack mount servers that work
> with FreeBSD (4.8). These will be placed in a colo facility so my
> requirements are:
>
> 1) Basic Lights out managemant via serial console
> 2) 2.66 or better processor
> 3) at least 2 gigE NICs
> 4) IDE/SCSI 80GB drive
>
> I am most concerned about good drivers for (3) and (4).
>
> Thank you,
> -ansh
>
> P.S. Please don't reply if you are a vendor.
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
>
>
> _______________________________________________
> freebsd-hardware at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to
> "freebsd-hardware-unsubscribe at freebsd.org"
>


+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~
Lanny Baron
Proud to be 100% FreeBSD
FreeBSD Systems, Inc / Freedom Technologies Corp.
http://www.FreeBSDsystems.COM
1.877.963.1900
+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~+~