lmmon IOCTL: Device not configured

[Mikhail Manuilov]

Hello, I have a problem with hardware monitors (chm, lmmon, healthd)
on my FreeBSD 4.8-STABLE box. Pentium 200 MMX, 64 DIMM, Tekram
Tekram-P5T30-B4 (430TX + PIIX4) rev 1.2 with latest bios.

#lmmon
IOCTL: Device not configured
#lmmon -i
 Motherboard Temp               Voltages

 255C / 491F / 528K        Vcore1:   +3.984V
                           Vcore2:   +3.984V
    Fan Speeds             + 3.3V:   +3.984V
                           + 5.0V:   +6.654V
    1:    0 rpm            +12.0V:  +15.938V
    2:    0 rpm            -12.0V:  -15.938V
    3:    0 rpm            - 5.0V:   -6.654V
#chm
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
Motherboard Temperature: 0 ° C
CPU_0 Temperature: 0 ° C
CPU_1 Temperature: 0 ° C
IOCTL: Device not configured
VCore:   0 V 
IOCTL: Device not configured
Vit:     0 V 
IOCTL: Device not configured
Vio:     0 V 
IOCTL: Device not configured
+5V:     0 V 
IOCTL: Device not configured
+12V:    0 V 
IOCTL: Device not configured
-12V:    -0 V 
IOCTL: Device not configured
-5V:     -0 V 
IOCTL: Device not configured
Fan 1: -2147483648 rpm
IOCTL: Device not configured
Fan 2: -2147483648 rpm
IOCTL: Device not configured
Fan 3: -2147483648 rpm

#chm -I
Motherboard Temperature: 255 ° C
CPU_0 Temperature: 0 ° C
CPU_1 Temperature: 0 ° C
VCore:   3.98438 V 
Vit:     3.98438 V 
Vio:     3.98438 V 
+5V:     6.65391 V 
+12V:    15.9375 V 
-12V:    -15.9375 V 
-5V:     -6.65391 V 
Fan 1: Not Available
Fan 2: Not Available
Fan 3: Not Available

#healthd -d
************************
* Hardware Information *
************************
Unknown Vendor: ID = FFFF
************************

Temp.= 255.0,  0.0,  0.0; Rot.=    0,    0,    0
 Vcore = 4.08, 4.08; Volt. = 4.08, 6.85, 15.50, -14.16, -6.12
 
 #healthd -d -S
ioctl(SMB_READB): Device not configured
InitMBInfo: Device not configured 

Strings from kernel conf file:

# System Management Bus support
device          smbus           # Bus support, required for smb below.
device          intpm           # Intel PIIX4 (82371AB, 82443MX) Power Management Unit
device          smb             # standard io through

# I2C Bus Support
device          iicbus          # Bus support, required for ic/iic/iicsmb below.
device          iicbb          # generic bit-banging master-only driver
                                # for lpbb (parallel port specific bit-banging interface)
                                # and  bktr (Brooktree848 video chipset, hardware and software
                                # master-only interface)

device          ic             # network IP interface
device          iic             # general i/o operation
device          iicsmb          # smb over i2c bridge

device          pcf0    at isa? port 0x320 irq 5
# Philips PCF8584 master/slave interface

#dmesg (only related)

intpm0: <Intel 82371AB Power management controller> port 0x5c00-0x5c0f irq 9 at device 1.3 on pci0
intpm0: I/O mapped 5c00
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 5800 
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
smb1: <SMBus general purpose I/O> on smbus1
iic0: <I2C general purpose I/O> on iic

Search - only same questions & no answers
Maybe somebody had solved such problems and can help me in mine ?
TALAOT

My respect to you. Viper
viper5k at pisem.net