SATA set features failed

[Wojciech Puchar]

this shows on booting on my new crucial M100 SSD in lenovo B590

(aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 
00 40 00 00 00 00 05 00
(aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error
(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 05 00
(aprobe0:ahcich0:0:0:0): Retrying command
(aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 
00 40 00 00 00 00 05 00
(aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error
(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 05 00
(aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Crucial CT128MX100SSD1 MU01> ATA-9 SATA 3.x device
ada0: Serial Number 14450DBF9558
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device

what does it means? what feature cannot be enabled?

otherwise - SSD works fine.