[SOLVED] home lab [AMD A10 5800K , AsRock FM2A85X-ITX] panics too much
Nicolas de Bari Embriz Garcia Rojas
nbari at inbox.im
Thu Apr 18 17:52:41 UTC 2013
Hi, the solution was to properly set the voltages of the memory on the BIOS.
memory on BIOS was configured to only use 1.25. and the specs of the memory say it required 1.5, setting the proper values on the BIOS did the trick.
regards.
On Apr 8, 2013, at 4:22 AM, Nicolas de Bari Embriz Garcia Rojas <nbari at inbox.im> wrote:
> Hi, all, I am having many kernel panic with an AMD A10 5800K cpu and a AsRock FM2A85X-ITX motherboard.
>
> I successfully installed FreeBSD 9.1 amd64 with zfs raidz on root, but when installing subversion from ports (make install clean), here my first kernel painc occurred. After the machine was online again I finished (make install clean) and well this time worked.
>
> I update the sources svn …. and tried a make -j4 buildworld, it started to build but later the machine just freeze.
>
> I later tried without the -j4 and was available to compile the world.
>
> when compiling the kernel (make kernel) I got another kernel panic and machine rebooted.
>
> This time before booting, I tried to fix the bios setting the the OC (overclook) features on the motherboard to match the hardware avoiding fancy things, and well some times now I get panics others not.
>
> I enable dumpdev="AUTO" in rc.conf, but problem is that I have all swap on the 'zfs' and I am not getting the dumps.
>
> So wondering if some one could give me an advice of how could I fine tune my system so that I can use this hardware.
>
> the logs unfortunately don't show nothing I have enable *.* /var/log/all.log on syslog.conf but don't show anything related to the panics.
>
> Any ideas ?
>
> below I let the output of dmesg.boot and pciconf
>
> 1 Copyright (c) 1992-2013 The FreeBSD Project.
> 2 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 3 The Regents of the University of California. All rights reserved.
> 4 FreeBSD is a registered trademark of The FreeBSD Foundation.
> 5 FreeBSD 9.1-STABLE #2 r249231: Sun Apr 7 13:36:17 UTC 2013
> 6 root at amdtest:/usr/obj/usr/src/sys/amdtest amd64
> 7 FreeBSD clang version 3.2 (tags/RELEASE_32/final 170710) 20121221
> 8 CPU: AMD A10-5800K APU with Radeon(tm) HD Graphics (4192.46-MHz K8-class CPU)
> 9 Origin = "AuthenticAMD" Id = 0x610f01 Family = 0x15 Model = 0x10 Stepping = 1
> 10 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> 11 Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
> 12 AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
> 13 AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,<b17>,NodeId,TBM,Topology,<b23>,<b24>>
> 14 Standard Extended Features=0x8
> 15 TSC: P-state invariant, performance statistics
> 16 real memory = 17179869184 (16384 MB)
> 17 avail memory = 16455127040 (15692 MB)
> 18 Event timer "LAPIC" quality 400
> 19 ACPI APIC Table: <ALASKA A M I>
> 20 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> 21 FreeBSD/SMP: 1 package(s) x 4 core(s)
> 22 cpu0 (BSP): APIC ID: 16
> 23 cpu1 (AP): APIC ID: 17
> 24 cpu2 (AP): APIC ID: 18
> 25 cpu3 (AP): APIC ID: 19
> 26 WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
> 27 ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-583)
> 28 ioapic0 <Version 2.1> irqs 0-23 on motherboard
> 29 kbd1 at kbdmux0
> 30 aesni0: <AES-CBC,AES-XTS> on motherboard
> 31 cryptosoft0: <software crypto> on motherboard
> 32 acpi0: <ALASKA A M I> on motherboard
> 33 acpi0: Power Button (fixed)
> 34 cpu0: <ACPI CPU> on acpi0
> 35 cpu1: <ACPI CPU> on acpi0
> 36 cpu2: <ACPI CPU> on acpi0
> 37 cpu3: <ACPI CPU> on acpi0
> 38 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> 39 Timecounter "i8254" frequency 1193182 Hz quality 0
> 40 Event timer "i8254" frequency 1193182 Hz quality 100
> 41 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> 42 Event timer "RTC" frequency 32768 Hz quality 0
> 43 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> 44 Timecounter "HPET" frequency 14318180 Hz quality 950
> 45 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> 46 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> 47 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> 48 pci0: <ACPI PCI bus> on pcib0
> 49 pci0: <base peripheral> at device 0.2 (no driver attached)
> 50 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xfc000000-0xfdffffff,0xff700000-0xff73ffff irq 17 at device 1.0 on pci0
> 51 pci0: <multimedia, HDA> at device 1.1 (no driver attached)
> 52 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
> 53 pci1: <ACPI PCI bus> on pcib1
> 54 em0: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0xe000-0xe01f mem 0xff6c0000-0xff6dffff,0xff600000-0xff67ffff,0xff6e0000-0xff6e3fff irq 18 at device 0.0 on pci1
> 55 em0: Using MSIX interrupts with 3 vectors
> 56 em0: Ethernet address: 68:05:ca:11:d3:2c
> 57 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xff74a000-0xff74bfff irq 18 at device 16.0 on pci0
> 58 xhci0: 32 byte context size.
> 59 usbus0 on xhci0
> 60 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xff748000-0xff749fff irq 17 at device 16.1 on pci0
> 61 xhci1: 32 byte context size.
> 62 usbus1 on xhci1
> 63 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xff751000-0xff7517ff irq 19 at device 17.0 on pci0
> 64 ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier supported
> 65 ahcich0: <AHCI channel> at channel 0 on ahci0
> 66 ahcich1: <AHCI channel> at channel 1 on ahci0
> 67 ahcich2: <AHCI channel> at channel 2 on ahci0
> 68 ahcich3: <AHCI channel> at channel 3 on ahci0
> 69 ahcich4: <AHCI channel> at channel 4 on ahci0
> 70 ohci0: <OHCI (generic) USB controller> mem 0xff750000-0xff750fff irq 18 at device 18.0 on pci0
> 71 usbus2 on ohci0
> 72 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xff74f000-0xff74f0ff irq 17 at device 18.2 on pci0
> 73 usbus3: EHCI version 1.0
> 74 usbus3 on ehci0
> 75 ohci1: <OHCI (generic) USB controller> mem 0xff74e000-0xff74efff irq 18 at device 19.0 on pci0
> 76 usbus4 on ohci1
> 77 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xff74d000-0xff74d0ff irq 17 at device 19.2 on pci0
> 78 usbus5: EHCI version 1.0
> 79 usbus5 on ehci1
> 80 pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> 81 pci0: <multimedia, HDA> at device 20.2 (no driver attached)
> 82 isab0: <PCI-ISA bridge> at device 20.3 on pci0
> 83 isa0: <ISA bus> on isab0
> 84 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> 85 pci2: <ACPI PCI bus> on pcib2
> 86 ohci2: <OHCI (generic) USB controller> mem 0xff74c000-0xff74cfff irq 18 at device 20.5 on pci0
> 87 usbus6 on ohci2
> 88 pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
> 89 pci3: <ACPI PCI bus> on pcib3
> 90 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe004000-0xfe004fff,0xfe000000-0xfe003fff irq 16 at device 0.0 on pci3
> 91 re0: Using 1 MSI-X message
> 92 re0: Chip rev. 0x2c800000
> 93 re0: MAC rev. 0x00000000
> 94 miibus0: <MII bus> on re0
> 95 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
> 96 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-fl ow, 1000baseT-FDX-flow-master, auto, auto-flow
> 97 re0: Ethernet address: bc:5f:f4:a3:25:65
> 98 acpi_button0: <Power Button> on acpi0
> 99 orm0: <ISA Option ROM> at iomem 0xcf800-0xd07ff on isa0
> 100 sc0: <System console> at flags 0x100 on isa0
> 101 sc0: VGA <16 virtual consoles, flags=0x300>
> 102 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> 103 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> 104 atkbd0: <AT Keyboard> irq 1 on atkbdc0
> 105 kbd0 at atkbd0
> 106 atkbd0: [GIANT-LOCKED]
> 107 ctl: CAM Target Layer loaded
> 108 acpi_throttle0: <ACPI CPU Throttling> on cpu0
> 109 hwpstate0: <Cool`n'Quiet 2.0> on cpu0
> 110 acpi_throttle1: <ACPI CPU Throttling> on cpu1
> 111 acpi_throttle1: failed to attach P_CNT
> 112 device_attach: acpi_throttle1 attach returned 6
> 113 acpi_throttle2: <ACPI CPU Throttling> on cpu2
> 114 acpi_throttle2: failed to attach P_CNT
> 115 device_attach: acpi_throttle2 attach returned 6
> 116 acpi_throttle3: <ACPI CPU Throttling> on cpu3
> 117 acpi_throttle3: failed to attach P_CNT
> 118 device_attach: acpi_throttle3 attach returned 6
> 119 ZFS filesystem version: 5
> 120 ZFS storage pool version: features support (5000)
> 121 Timecounters tick every 1.000 msec
> 122 vboxdrv: fAsync=0 offMin=0x44e offMax=0x74f
> 123 IPsec: Initialized Security Association Processing.
> 124 ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to accept, logging disabled
> 125 usbus0: 5.0Gbps Super Speed USB v3.0
> 126 usbus1: 5.0Gbps Super Speed USB v3.0
> 127 usbus2: 12Mbps Full Speed USB v1.0
> 128 usbus3: 480Mbps High Speed USB v2.0
> 129 usbus4: 12Mbps Full Speed USB v1.0
> 130 usbus5: 480Mbps High Speed USB v2.0
> 131 usbus6: 12Mbps Full Speed USB v1.0
> 132 ugen0.1: <0x1022> at usbus0
> 133 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
> 134 ugen1.1: <0x1022> at usbus1
> 135 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
> 136 ugen2.1: <AMD> at usbus2
> 137 uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> 138 ugen3.1: <AMD> at usbus3
> 139 uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> 140 ugen4.1: <AMD> at usbus4
> 141 uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> 142 ugen5.1: <AMD> at usbus5
> 143 uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
> 144 ugen6.1: <AMD> at usbus6
> 145 uhub6: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> 146 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> 147 ada0: <ST2000DM001-1CH164 CC24> ATA-8 SATA 3.x device
> 148 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> 149 ada0: Command Queueing enabled
> 150 ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
> 151 ada0: Previously was known as ad4
> 152 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> 153 ada1: <ST2000DM001-1CH164 CC24> ATA-8 SATA 3.x device
> 154 ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> 155 ada1: Command Queueing enabled
> 156 ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
> 157 ada1: Previously was known as ad6
> 158 ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
> 159 ada2: <WDC WD20EARX-32PASB0 51.0AB51> ATA-8 SATA 3.x device
> 160 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> 161 ada2: Command Queueing enabled
> 162 ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
> 163 ada2: Previously was known as ad8
> 164 ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
> 165 ada3: <WDC WD20EZRX-00DC0B0 80.00A80> ATA-9 SATA 3.x device
> 166 ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> 167 ada3: Command Queueing enabled
> 168 ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
> 169 ada3: Previously was known as ad10
> 170 SMP: AP CPU #2 Launched!
> 171 SMP: AP CPU #1 Launched!
> 172 SMP: AP CPU #3 Launched!
> 173 Timecounter "TSC-low" frequency 2096231117 Hz quality 1000
> 174 uhub6: 2 ports with 2 removable, self powered
> 175 uhub4: 5 ports with 5 removable, self powered
> 176 uhub2: 5 ports with 5 removable, self powered
> 177 uhub1: 4 ports with 4 removable, self powered
> 178 uhub0: 4 ports with 4 removable, self powered
> 179 Root mount waiting for: usbus5 usbus3
> 180 uhub3: 5 ports with 5 removable, self powered
> 181 uhub5: 5 ports with 5 removable, self powered
> 182 Trying to mount root from zfs:zroot []...
> 183 bridge0: Ethernet address: 02:fe:4a:c8:9c:00
> 184 bridge1: Ethernet address: 02:fe:4a:c8:9c:01
> 185 epair0a: Ethernet address: 02:00:a0:00:0f:0a
> 186 epair0b: Ethernet address: 02:00:a0:00:10:0b
> 187 epair1a: Ethernet address: 02:00:a0:00:11:0a
> 188 epair1b: Ethernet address: 02:00:a0:00:12:0b
> 189 tap0: Ethernet address: 00:bd:14:26:00:00
> 190 re0: link state changed to UP
>
> the output of pciconf -l is:
> hostb0 at pci0:0:0:0: class=0x060000 card=0x14101849 chip=0x14101022 rev=0x00 hdr=0x00
> none0 at pci0:0:0:2: class=0x080600 card=0x14191022 chip=0x14191022 rev=0x00 hdr=0x00
> vgapci0 at pci0:0:1:0: class=0x030000 card=0x99011849 chip=0x99011002 rev=0x00 hdr=0x00
> none1 at pci0:0:1:1: class=0x040300 card=0x99021849 chip=0x99021002 rev=0x00 hdr=0x00
> pcib1 at pci0:0:2:0: class=0x060400 card=0x12341022 chip=0x14121022 rev=0x00 hdr=0x01
> xhci0 at pci0:0:16:0: class=0x0c0330 card=0x78121022 chip=0x78121022 rev=0x03 hdr=0x00
> xhci1 at pci0:0:16:1: class=0x0c0330 card=0x78121022 chip=0x78121022 rev=0x03 hdr=0x00
> ahci0 at pci0:0:17:0: class=0x010601 card=0x78011849 chip=0x78011022 rev=0x40 hdr=0x00
> ohci0 at pci0:0:18:0: class=0x0c0310 card=0x78071849 chip=0x78071022 rev=0x11 hdr=0x00
> ehci0 at pci0:0:18:2: class=0x0c0320 card=0x78081849 chip=0x78081022 rev=0x11 hdr=0x00
> ohci1 at pci0:0:19:0: class=0x0c0310 card=0x78071849 chip=0x78071022 rev=0x11 hdr=0x00
> ehci1 at pci0:0:19:2: class=0x0c0320 card=0x78081849 chip=0x78081022 rev=0x11 hdr=0x00
> none2 at pci0:0:20:0: class=0x0c0500 card=0x780b1849 chip=0x780b1022 rev=0x14 hdr=0x00
> none3 at pci0:0:20:2: class=0x040300 card=0x88921849 chip=0x780d1022 rev=0x01 hdr=0x00
> isab0 at pci0:0:20:3: class=0x060100 card=0x780e1849 chip=0x780e1022 rev=0x11 hdr=0x00
> pcib2 at pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x780f1022 rev=0x40 hdr=0x01
> ohci2 at pci0:0:20:5: class=0x0c0310 card=0x78091849 chip=0x78091022 rev=0x11 hdr=0x00
> pcib3 at pci0:0:21:0: class=0x060400 card=0x00001022 chip=0x43a01022 rev=0x00 hdr=0x01
> hostb1 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x14001022 rev=0x00 hdr=0x00
> hostb2 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x14011022 rev=0x00 hdr=0x00
> hostb3 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x14021022 rev=0x00 hdr=0x00
> hostb4 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x14031022 rev=0x00 hdr=0x00
> hostb5 at pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x14041022 rev=0x00 hdr=0x00
> hostb6 at pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x14051022 rev=0x00 hdr=0x00
> em0 at pci0:1:0:0: class=0x020000 card=0xa01f8086 chip=0x10d38086 rev=0x00 hdr=0x00
> re0 at pci0:3:0:0: class=0x020000 card=0x81681849 chip=0x816810ec rev=0x06 hdr=0x00
>
>
>
More information about the freebsd-hackers
mailing list