Android development (was Re: best way to run -RELEASE and -CURRENT on the same machine)

[Aryeh Friedman]

I am brand new to the whole android development thing... All I know is
the phone some how makes it self look like a Linux machine to the
outside world (how and such I have no clue)... when I connected it to
USB I got:

ugen5.2: <HTC> at usbus5
umass0: <HTC Android Phone, class 0/0, rev 1.02/1.00, addr 2> on usbus5
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power
on, reset, or bus device reset occurred)
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present

My mother board has a built in NIC so I think no WiFi there but I go
through a NetGear 54g router so if you can tell me the default IP or
anything else that would be helpful (the phone is completely set to
factory defaults has no SIM card or service)


On Sat, Jan 15, 2011 at 4:48 PM, Mark Felder <feld at feld.me> wrote:
> I saw you mention android development -- is adb over usb working on -CURRENT
> or something? I've been forced to use adb over wifi since I can't get access
> to my android phones over USB :(
>
>
> Regards,
>
>
> Mark
>