Activate PCIe slot deactivated by BIOS

[Rui Paulo]

On 22 May 2010, at 13:27, Dominic Fandrey wrote:

> On 22/05/2010 13:47, Dominic Fandrey wrote:
>> Today the card arrived and the BIOS complains (HP 6510b):
>> 	104-Unsupported wireless network device detected.
>> 	System halted. Remove device and restart.
>> 
>> The system boots if I turn off the wireless device in BIOS, but
>> this means I cannot use it.
>> 
>> Now, I could just get a BIOS image and exchange the device IDs
>> there. But I wonder, wouldn't it be easier to just reactivate the
>> PCIe slot through the OS?
> 
> This e-mail is written through the ath wireless I got:
> 
> # ifconfig
> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
> 	ether 00:24:2c:1d:f0:2f
> 	media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
> 	status: associated
> ...
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> 	ether 00:24:2c:1d:f0:2f
> 	inet 192.168.178.41 netmask 0xffffff00 broadcast 192.168.178.255
> 	media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
> 	status: associated
> 	ssid "Obi-Wan Kenobi" channel 7 (2442 MHz 11g) bssid 00:15:0c:d5:37:a0
> 	regdomain 101 indoor ecm authmode WPA2/802.11i privacy ON
> 	deftxkey UNDEF AES-CCM 2:128-bit txpower 20 bmiss 7 scanvalid 450
> 	bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5
> 	protmode CTS wme burst roaming MANUAL
> 
> I achieved this by passing the BIOS check with the intel wireless and
> hot-swapping it with the atheros card afterwards. This is impractical
> and evil, so I'm still searching for a solution.
> 
> But at least I know that the device works.

HP laptops really dislike the fact that your card isn't part of the Centrino brand, so they halt if they find an Atheros. Your best option is to change the Atheros card EEPROM to match the device and vendor id of your wpi card. Then you also need to change the ath driver to attach to that device id.

It's evil, but it's better than hot-swapping.

The other option is to buy a iwn card which works better in FreeBSD than wpi.

Regards,
--
Rui Paulo