wlan problem. auto change channel
Veniamin Gvozdikov
g.veniamin at googlemail.com
Thu Dec 2 04:41:53 UTC 2010
Hi everybody!
I have problem with my access point with freebsd after update of 7.3 to
8.1. I can't connect to AP. AP has auto change channel (
http://fbsd.zlonet.ru/temp/wifi-problem.mov ). In the ifconfig not
changes. How to fix it?
FreeBSD server.zlonet.ru 8.1-RELEASE-p2 FreeBSD 8.1-RELEASE-p2 #4: Wed
Dec 1 17:39:53 KRAT 2010
admin at server.zlonet.ru:/mnt/freebsd/obj/mnt/freebsd/src/8/src/sys/zlonet_r81
i386
kernel
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device wlan_xauth
device ath # Atheros pci/cardbus NIC's
device ath_hal # pci/cardbus chip support
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
device ath_rate_sample # SampleRate tx rate control for ath
rc.conf
ifconfig_rl0="up"
wlans_ath0="wlan0"
create_args_wlan0="wlanmode ap mediaopt hostap mode 11g ssid zlonet.ru
channel 6 country RU"
ifconfig_wlan0="up"
cloned_interfaces="bridge0"
ifconfig_bridge0="inet 192.168.3.100 netmask 255.255.255.0 addm rl0 addm
wlan0 up"
hostapd_enable="YES"
server# cat /etc/hostapd.conf
interface=wlan0
macaddr_acl=0
#driver=bsd
debug=1
ctrl_interface=/var/run/hostapd
ctrl_interface_group=wheel
ssid=zlonet.ru
hw_mode=g
channel=6
#auth_algs=2
wpa=2
wpa_passphrase=megapassword
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:14:78:ee:d8:c1
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: running
rl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
mtu 1500
options=8<VLAN_MTU>
ether 00:e0:4c:7e:df:29
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 16:69:b9:6d:3e:73
inet 192.168.3.100 netmask 0xffffff00 broadcast 192.168.3.255
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: wlan0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 11 priority 128 path cost 370370
member: rl0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 4 priority 128 path cost 55
wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
0 mtu 1500
ether 00:14:78:ee:d8:c1
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: running
ssid zlonet.ru channel 6 (2437 MHz 11g) bssid 00:14:78:ee:d8:c1
regdomain NONE country RU indoor ecm authmode WPA2/802.11i
privacy MIXED deftxkey 2 AES-CCM 2:128-bit AES-CCM 3:128-bit
txpower 30 scanvalid 60 protmode CTS wme burst dtimperiod 1 -dfs
pciconf -lv
ath0 at pci0:0:8:0: class=0x020000 card=0x1052168c chip=0x001a168c
rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device =
'http://cr.am/framed.php?url=http%3A%2F%2Fwww.tp%2Dlink.com%2Fsupport%2Fdownload.asp&ref=driverguide
(Atheros AR5005G)'
class = network
subclass = ethernet
More information about the freebsd-hackers
mailing list