NMI with 7.2-stable

[ivan anyukov]

dmesg goes here:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #12: Wed Aug 26 23:21:46 CEST 2009
    root at fnord:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) Duo CPU      T2400  @ 1.83GHz (1828.76-MHz 686-class
CPU)
  Origin = "GenuineIntel"  Id = 0x6ec  Stepping = 12

Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,xTPR,PDCM>
  AMD Features=0x100000<NX>
  Cores per package: 2
real memory  = 1609367552 (1534 MB)
avail memory = 1563168768 (1490 MB)
ACPI APIC Table: <LENOVO TP-79   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or
length:        0    102C/0 [20070320]
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <LENOVO TP-79> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem
0xd8000000-0xdfffffff,0xee100000-0xee10ffff irq 16 at device 0.0 on pci1
hdac0: <Intel 82801G High Definition Audio Controller> mem
0xee400000-0xee403fff irq 17 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x3000-0x301f mem
0xee000000-0xee01ffff irq 16 at device 0.0 on pci2
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1e:37:cb:53:b3
pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xedf00000-0xedf00fff irq 17 at
device 0.0 on pci3
wpi0: Ethernet address: 00:18:de:9d:0e:8f
wpi0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci12: <ACPI PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 16 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 17 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device
29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 19 at device
29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xee404000-0xee4043ff
irq 19 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
uhub5: <vendor 0x04b3 product 0x4485, class 9/0, rev 2.00/0.01, addr 2> on
uhub4
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0,
rev 1.10/3.00, addr 3> on uhub5
ums0: 3 buttons and Z dir.
ukbd0: <Logitech HID compliant keyboard, class 0/0, rev 1.10/1.80, addr 4>
on uhub5
kbd2 at ukbd0
uhid0: <Logitech HID compliant keyboard, class 0/0, rev 1.10/1.80, addr 4>
on uhub5
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib6
cbb0: <TI1510 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at device
0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7M SATA300 controller> port
0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf mem
0xee404400-0xee4047ff irq 16 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: port not implemented
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: port not implemented
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: port not implemented
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01,
addr 2> on uhub3
Timecounters tick every 1.000 msec
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4247N/1.01> at ata0-master UDMA33
ad4: 476940MB <Seagate ST9500325AS 0001SDM1> at ata2-master SATA150
hdac0: HDA Codec #0: Analog Devices AD1981HD
hdac0: HDA Codec #1: Conexant (Unknown)
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Analog Devices AD1981HD PCM #1 Digital> at cad 0 nid 1 on hdac0
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad4s1a is ufsid/427627623762bv3.
GEOM_LABEL: Label for provider ad4s1d is ufsid/427627623762bv3
GEOM_LABEL: Label for provider ad4s1e is ufsid/427627623762bv3.
GEOM_LABEL: Label for provider ad4s1f is ufsid/427627623762bv3.
Trying to mount root from ufs:/dev/ad4s1a
cryptosoft0: <software crypto> on motherboard
GEOM_ELI: Device ad4s1g.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI:     Crypto: software
GEOM_LABEL: Label for provider ad4s1g.eli is ufsid/49863f.
GEOM_LABEL: Label ufsid/45 removed.
GEOM_LABEL: Label for provider ad4s1a is ufsid/49835.
[...GEOM-stuff]
drm0: <ATI Mobility Radeon X1300> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080528
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R500 Microcode
info: [drm] Num pipes: 1
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]

2009/10/1 Attilio Rao <attilio at freebsd.org>

> Can you send a full dmesg?
>
> 2009/10/1 ivan anyukov <ivan.anyukov at googlemail.com>:
> > Hi guys,
> > I'm running 7.2-STABLE on a Thinkpad T60.
> > When connecting a second monitor to my docking station sometimes my
> FreeBSD
> > freezes.
> > kgdb on the vmcore-file says "non-maskable interrupt trap"
> > Some details:
> > X.Org 1.5.3 using the radeon-Driver
> > I think the problem appears when moving xterms from the first to the
> second
> > monitor (or back). The mouse cursor looks _very_ strange then and after
> some
> > minutes the whole system freezes.
> > Does anyone know about the problem? Is it a hardware-failure for sure?
> >
> > A vmcore is generated, I loaded it into kgdb:
> >
> > This GDB was configured as "i386-marcel-freebsd"...
> >
> > Unread portion of the kernel message buffer:
> > <<22>NMI>N MIIS AI SA b0b, 0E,I ESIAS A ffff
> > <
> > 2>R<2
> >>RA<2M >ApMa rpiatyr ietryr oerr,r olri,k elliyk ehlayr dhwaarrdew afraei
> > lfuariel.ure.
> >
> >
> >
> > FFaattaall  ttrraapp  1199::  nnoonn--mmaasskkaabbllee
>  iinntteerrrruupptt
> > ttrraapp  wwhhiillee  iinn  kkeerrnneell  mmooddee
> >
> > ccppuuiidd  ==  01;;  aappiicc  iidd  ==  0010
> >
> > iinnssttrruuccttiioonn  ppooiinntteerr          ==
> > 00xx2200::00xxcc00eeaa7733eecc
> >
> > ssttaacckk  ppooiinntteerr                              ==
> > 00xx2288::00xxcc4477aa58cc8888
> >
> > ffrraammee  ppooiinntteerr                              ==
> > 00xx2288::00xxcc4477aa58cc8888
> >
> > ccooddee  sseeggmmeenntt                                ==  bbaassee
> > 00xx00,,  lliimmiitt  00xxffffffffff,,  ttyyppee  00xx11bb
> >
> >                                                ==  DDPPLL  00,,  pprreess
> > 11,,  ddeeff3322  11,,  ggrraann  11
> >
> > pprroocceessssoorr  eeffllaaggss                ==  iinntteerrrruupptt
> > eennaabblleedd,,  IIOOPPLL  ==  00
> >
> > ccuurrrreenntt  pprroocceessss                          ==  1112
> > ((iiddllee::  ccppuu10))
> >
> > ttrraapp  nnuummbbeerr                          ==  1199
> >
> > backtrace says:
> > #0  doadump () at pcpu.h:196
> > #1  0xc07c5258 in boot (howto=260) at
> /usr/src/sys/kern/kern_shutdown.c:418
> > #2  0xc07c5535 in panic (fmt=Variable "fmt" is not available.
> > ) at /usr/src/sys/kern/kern_shutdown.c:574
> > #3  0xc0ab2d14 in trap_fatal (frame=0xc47a5c48, eva=0) at
> > /usr/src/sys/i386/i386/trap.c:939
> > #4  0xc0ab3a9d in trap (frame=0xc47a5c48) at
> > /usr/src/sys/i386/i386/trap.c:726
> > #5  0xc0a9910b in calltrap () at /usr/src/sys/i386/i386/exception.s:159
> > #6  0xc0ea73ec in acpi_cpu_c1 () at
> > /usr/src/sys/modules/acpi/acpi/../../../i386/acpica/acpi_machdep.c:550
> > #7  0xc0ea0623 in acpi_cpu_idle () at
> > /usr/src/sys/modules/acpi/acpi/../../../dev/acpica/acpi_cpu.c:943
> > #8  0xc0aa377b in cpu_idle () at /usr/src/sys/i386/i386/machdep.c:1183
> > #9  0xc07e6bd4 in sched_idletd (dummy=0x0) at
> > /usr/src/sys/kern/sched_ule.c:2681
> > #10 0xc07a1311 in fork_exit (callout=0xc07e690f <sched_idletd>, arg=0x0,
> > frame=0xc47a5d38)
> >    at /usr/src/sys/kern/kern_fork.c:810
> > #11 0xc0a99180 in fork_trampoline () at
> > /usr/src/sys/i386/i386/exception.s:264
> >
> > Any ideas?
> >
> > Thanks a lot!
> > _______________________________________________
> > freebsd-hackers at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> > To unsubscribe, send any mail to "
> freebsd-hackers-unsubscribe at freebsd.org"
> >
>
>
>
> --
> Peace can only be achieved by understanding - A. Einstein
>