support for i45 (ich10) chipsets

[Aryeh M. Friedman]

Olivier SMEDTS wrote:
> Hello,
>
> 2009/1/10 Aryeh M. Friedman <aryeh.friedman at gmail.com>:
>   
>> I just got a i45 based motherboard and everything works except for the
>> following pci:
>>
>> none2 at pci0:1:0:0:       class=0x020000 card=0x83671043 chip=0x816810ec
>> rev=0x02 hdr=0x00
>>    vendor     = 'Realtek Semiconductor'
>>    device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
>>    class      = network
>>    subclass   = ethernet
>>     
>
> This does not seem to be related to the Intel ICH10 chipsets. This
> must be a second network adapter on your motherboard. For information,
> my ASUS P5Q3 (Intel ICH10 too) works very well, everything is
> detected. The two network controllers are a "88E8056 Yukon PCI-E
>   

Same motherboard
> Gigabit Ethernet Controller" (if_msk driver) and a "Yukon
> 88E8001/8003/8010 PCI Gigabit Ethernet Controller (Copper)" (if_sk
> driver).
> Is your watchdog detected (ichwd driver) ?
> I'm also using the ichsmb driver without issues.
>
> See the following thread on freebsd-questions :
> http://lists.freebsd.org/pipermail/freebsd-questions/2008-November/187147.html
>
> According to it, RTL8168/8111 should work with 7.1-RELEASE. Are you
> using the if_re driver ? Try loading the if_re.ko module, as I think
> it's not in the GENERIC kernel.
>   

I am used to current where it is in GENERIC so will add it to my config
I guess
> Cheers
>
>   
>> does -current support it or should I stay with 7.1-RELEASE ? (i386)
>> _______________________________________________
>> freebsd-hackers at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
>> To unsubscribe, send any mail to "freebsd-hackers-unsubscribe at freebsd.org"
>>
>>     
>
>