atacontrol broken in 7.1-PR
Bruce Cran
bruce at cran.org.uk
Sun Sep 28 22:25:10 UTC 2008
On Sun, 28 Sep 2008 10:43:58 +0000 (UTC)
Pegasus McCleaft <ken at hercules.mthelicon.com> wrote:
> Hello everyone.
>
> I was wondering if anyone else is experiencing this problem.
> I have recently reloaded my machine (due to a meltdown of my primary
> boot drive) and noticed that under 7.0-rel the atacontrol command
> seems to work great, however, under 7.1 I get and error
>
> atacontrol: ioctl(IOCATADEVICES): Device not configured
>
> Has anyone else seen this error. I wouldent be conserned if
> it wasent for the fact that it worked under 7.0-rel but now dosent.
> The machine is using both the:
>
> atapci0: <SiI SiI 3132 SATA300 controller>
> atapci1: <JMicron JMB363 SATA300 controller>
I'm also seeing this problem on my amd64 7.1-PRERELEASE system:
> atacontrol list
ATA channel 0:
Master: acd0 <HL-DT-ST DVD+/-RW GSA-T11N/A102> ATA/ATAPI revision 5
Slave: no device present
atacontrol: ioctl(IOCATADEVICES): Device not configured
I've attached the dmesg, and truss output from "atacontrol list".
--
Bruce Cran
-------------- next part --------------
__sysctl(0x7fffffffe8b0,0x2,0x7fffffffe8cc,0x7fffffffe8c0,0x0,0x0) = 0 (0x0)
mmap(0x0,576,PROT_READ|PROT_WRITE,MAP_ANON,-1,0x0) = 34365149184 (0x800529000)
munmap(0x800529000,576) = 0 (0x0)
__sysctl(0x7fffffffe920,0x2,0x800630fc8,0x7fffffffe918,0x0,0x0) = 0 (0x0)
mmap(0x0,32768,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34365149184 (0x800529000)
issetugid(0x80052a015,0x800524869,0x800634910,0x8006348e0,0x57ac,0x7fffffffe918) = 0 (0x0)
open("/etc/libmap.conf",O_RDONLY,0666) ERR#2 'No such file or directory'
open("/var/run/ld-elf.so.hints",O_RDONLY,057) = 3 (0x3)
read(3,"Ehnt\^A\0\0\0\M^@\0\0\0\M^\\0\0"...,128) = 128 (0x80)
lseek(3,0x80,SEEK_SET) = 128 (0x80)
read(3,"/lib:/usr/lib:/usr/lib/compat:/u"...,156) = 156 (0x9c)
close(3) = 0 (0x0)
access("/lib/libc.so.7",0) = 0 (0x0)
open("/lib/libc.so.7",O_RDONLY,030607240) = 3 (0x3)
fstat(3,{ mode=-r--r--r-- ,inode=17511,size=1174560,blksize=4096 }) = 0 (0x0)
read(3,"\^?ELF\^B\^A\^A\t\0\0\0\0\0\0\0"...,4096) = 4096 (0x1000)
mmap(0x0,2240512,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_NOCORE,3,0x0) = 34366246912 (0x800635000)
mprotect(0x800724000,4096,PROT_READ|PROT_WRITE|PROT_EXEC) = 0 (0x0)
mprotect(0x800724000,4096,PROT_READ|PROT_EXEC) = 0 (0x0)
mmap(0x800824000,118784,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED,3,0xef000) = 34368274432 (0x800824000)
mmap(0x800841000,94208,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_ANON,-1,0x0) = 34368393216 (0x800841000)
close(3) = 0 (0x0)
sysarch(0x81,0x7fffffffe9a0,0x80052e088,0x0,0xffffffffffd03650,0x7fffffffe6f8) = 0 (0x0)
mmap(0x0,384,PROT_READ|PROT_WRITE,MAP_ANON,-1,0x0) = 34365181952 (0x800531000)
munmap(0x800531000,384) = 0 (0x0)
mmap(0x0,42096,PROT_READ|PROT_WRITE,MAP_ANON,-1,0x0) = 34365181952 (0x800531000)
munmap(0x800531000,42096) = 0 (0x0)
__sysctl(0x7fffffffe950,0x2,0x800841ae0,0x7fffffffe948,0x0,0x0) = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0) = 0 (0x0)
open("/dev/ata",O_RDWR,037777766320) = 3 (0x3)
ioctl(3,IOCATAGMAXCHANNEL,0xffffec20) = 0 (0x0)
ioctl(3,IOCATADEVICES,0xffffe590) = 0 (0x0)
fstat(1,{ mode=-rw-r--r-- ,inode=307828,size=2281,blksize=4096 }) = 0 (0x0)
__sysctl(0x7fffffffdba0,0x2,0x800845b48,0x7fffffffdbb8,0x0,0x0) = 0 (0x0)
__sysctl(0x7fffffffd6f0,0x2,0x8008547d8,0x7fffffffd6e8,0x0,0x0) = 0 (0x0)
__sysctl(0x7fffffffd730,0x2,0x7fffffffd74c,0x7fffffffd740,0x0,0x0) = 0 (0x0)
readlink("/etc/malloc.conf",0x7fffffffd790,1024) ERR#2 'No such file or directory'
issetugid(0x80071c2aa,0x7fffffffd790,0xffffffffffffffff,0x0,0xffffffff80ac1c40,0x7fffffffd768) = 0 (0x0)
break(0x600000) = 0 (0x0)
break(0x700000) = 0 (0x0)
ioctl(3,IOCATADEVICES,0xffffe590) ERR#6 'Device not configured'
atacontrol: write(2,"atacontrol: ",12) = 12 (0xc)
ioctl(IOCATADEVICES)write(2,"ioctl(IOCATADEVICES)",20) = 20 (0x14)
: write(2,": ",2) = 2 (0x2)
Device not configured
write(2,"Device not configured\n",22) = 22 (0x16)
ATA channel 0:
Master: acd0 <HL-DT-ST DVD+/-RW GSA-T11N/A102> ATA/ATAPI revision 5
Slave: no device present
write(1,"ATA channel 0:\n Master: acd0"...,122) = 122 (0x7a)
process exit, rval = 1
-------------- next part --------------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #0: Fri Sep 12 22:23:24 BST 2008
brucec at tau.draftnet:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-52 (1600.06-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
usable memory = 2065436672 (1969 MB)
avail memory = 1992933376 (1900 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL M08 > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 0, 1000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xd4000000-0xd7ffffff,0xd0100000-0xd010ffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pci5: <network> at device 0.0 (no driver attached)
atapci0: <ATI IXP600 SATA300 controller> port 0x8438-0x843f,0x8454-0x8457,0x8430-0x8437,0x8450-0x8453,0x8400-0x840f mem 0xd0004000-0xd00043ff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xd0005000-0xd0005fff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0006000-0xd0006fff irq 17 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xd0007000-0xd0007fff irq 18 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xd0008000-0xd0008fff irq 17 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xd0009000-0xd0009fff irq 18 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0004400-0xd00044ff irq 19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xd0300000-0xd0301fff irq 21 at device 0.0 on pci8
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:19:b9:54:f0:4a
bfe0: [ITHREAD]
pci8: <base peripheral> at device 1.0 (no driver attached)
pci8: <base peripheral> at device 1.1 (no driver attached)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVD+/-RW GSA-T11N/A102> at ata0-master UDMA33
ad4: 114473MB <SAMSUNG HM120JI YF100-15> at ata2-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s2a
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
pid 859 (gnome-keyring-daemo), uid 1001: exited on signal 11 (core dumped)
umass0: <Macpower &Tytech Tech USB2.0 Enclosure, class 0/0, rev 2.00/1.00, addr 2> on uhub5
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Maxtor 6 PYVG 1630> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 239372MB (490234752 512 byte sectors: 255H 63S/T 30515C)
More information about the freebsd-hackers
mailing list