bge/ilo blues on Sun X2200 (fwd)

[Danny Braniss]

> On Fri, Nov 09, 2007 at 10:22:42AM +0200, Danny Braniss wrote:
> > trying my luck here :-)
> > 
> > newer kernels (after Oct. 20) are breacking bge.
> > i've checked the cvsdiffs, but nothing seems relevant.
> > 
> > the ilo (Integrated Lights Out) port, bge1, though not configured, gets
> > configured to 10baseT/UTP <full-duplex>, and no magic will
> > get it to 100/full-duplex, which is what the ilo was/is using.
> > 
> > this works fine on an Oct 20 system.
> > 
> > any ideas?
> 
> Try using the following in /boot/loader.conf and reboot:
> 
> hw.bge.allow_asf=1
> 
> The default is 0.
Yes, that works!
thanks!
	danny