vlan taggging on etherchannel

[Denis Barov]

On Tue Aug 21, 2007 at 11:53:36 +0200, Mohacsi Janos wrote:
> Dear All,
> 	What is the recommended way to configure vlan interfaces on etherchannel bonded interfaces in 
> a failure mode. I found, that etherchannel is supported by ng_fec(4) (but not exactly what I 
> want) and also found that there two? way of configuring vlans: vlan(4) and ng_vlan(4). But I 
> did not found any description or configuration snippet to configure both preferentially via 
> /etc/rc.conf neither in FreeBSD 6.x-stable, neither in FreeBSD-7.0-current. What I want to 
> achieve:
> 
>   [switch1]-----GE---bge0----\    /----vlan100
>                               }=={-----vlan101
>   [switch2]-----FE---bge1----/    \----vlan102
>                                    \---vlan103
> 
> 
> I would like to  prefer all the vlans via bge0 with GE towards switch1. And use only bge1 in 
> case of switch1 or bge0 link failure.
> 
> I could use bond on Linux for this purpose. How to achieve similar setup?
> 
> Best Regards,
> 
> Janos Mohacsi
> Network Engineer, Research Associate, Head of Network Planning and Projects
> NIIF/HUNGARNET, HUNGARY
> Key 70EF9882: DEC2 C685 1ED4 C95A 145F  4300 6F64 7B00 70EF 9882
> _______________________________________________
> freebsd-hackers at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> To unsubscribe, send any mail to "freebsd-hackers-unsubscribe at freebsd.org"
Probably net/ucarp?

Cheers,
Denis Barov
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-hackers/attachments/20070821/241878fe/attachment.pgp