problem with SCSI
Oleg D.
killa at ebash.it
Tue Jun 6 09:01:27 UTC 2006
Sorry for some offtopic.
Experiencing some troubles with SCSI disks on FBSD 4.8 and looking for
advice/solution how to fix/diagnose-more...
What (maybe not) causes troubles:
okey# make clean
===> Cleaning for m4-1.4_1
rm: /usr/ports/devel/m4/work: Directory not empty
*** Error code 1
Stop in /usr/ports/devel/m4.
*** Error code 1
Stop in /usr/ports/devel/m4.
okey#
Message from syslogd at okey at Tue Jun 6 10:50:12 2006 ...
okey /kernel: <<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
and machine went stuck...
That error report happenned twice after what machine was rebooted (just
`reset`ing). After reboot with turning off power and so on:
`camcontrol' tells that all is OK, but I think it's not...
Was using `iostat' to have some additional traces, but it showed that's
all ok even.
Also used `dd' to make some huge loads on disks, but it even told me
nothing, except "OK".
System:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE-p22 #3: Thu May 27 16:53:05 MSD 2004
root at okey.caravan.ru:/usr/obj/usr/src/sys/OKEY
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2791.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,P
BE>
Hyperthreading: 2 logical CPUs
real memory = 2147418112 (2097088K bytes)
avail memory = 2087776256 (2038844K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x00178020, at 0xfec00000
io1 (APIC): apic id: 9, version: 0x00178020, at 0xfec81000
io2 (APIC): apic id: 10, version: 0x00178020, at 0xfec81400
Preloaded elf kernel "kernel" at 0xc03ce000.
ccd0-1: Concatenated disk drivers
Pentium Pro MTRR support enabled
Using $PIR table, 19 entries at 0xc00f3630
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 17 -> irq 2
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2
IOAPIC #2 intpin 2 -> irq 16
IOAPIC #2 intpin 1 -> irq 17
pci4: <PCI bus> on pcib2
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x4000-0x40ff,0x3800-0x38ff mem 0xfe9e0000-0xfe9e1fff irq 16 at device
7.0 on pci4
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x3400-0x34ff,0x3000-0x30ff mem 0xfe9f0000-0xfe9f1fff irq 17 at device
7.1 on pci4
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2
IOAPIC #1 intpin 6 -> irq 18
IOAPIC #1 intpin 7 -> irq 19
pci3: <PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port
0x2040-0x207f mem 0xfe6c0000-0xfe6dffff irq 18 at device 7.0 on pci3
em0: Speed:100 Mbps Duplex:Half
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port
0x2000-0x203f mem 0xfe6e0000-0xfe6fffff irq 19 at device 7.1 on pci3
em1: Speed:N/A Duplex:N/A
pci0: <unknown card> (vendor=0x8086, dev=0x2546) at 3.1
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib4
pci1: <ATI Mach64-GR graphics accelerator> at 12.0 irq 2
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 2
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
acd0: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. done
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
pass2 at ahd1 bus 0 target 6 lun 0
pass2: <ESG-SHV SCA HSBP M22 0.06> Fixed Processor SCSI-2 device
pass2: 3.300MB/s transfers
da0 at ahd1 bus 0 target 0 lun 0
da0: <SEAGATE ST373307LC 0007> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da1 at ahd1 bus 0 target 1 lun 0
da1: <SEAGATE ST373454LC 0003> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
Kernel:
machine i386
cpu I686_CPU
ident OKEY
maxusers 0
options INET
options FFS
options FFS_ROOT
options SOFTUPDATES
options UFS_DIRHASH
options CD9660
options CD9660_ROOT
options PROCFS
options COMPAT_43
options SCSI_DELAY=15000
options UCONSOLE
options USERCONFIG
options VISUAL_USERCONFIG
options KTRACE
options SYSVSHM
options SYSVMSG
options SYSVSEM
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM
options KBD_INSTALL_CDEV
options AHC_REG_PRETTY_PRINT
options AHD_REG_PRETTY_PRINT
options SMP
options APIC_IO
options HTT
device isa
device eisa
device pci
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk
device atapicd
device atapifd
options ATA_STATIC_ID
device ahb
device ahc
device ahd
device amd
device isp
device mpt
device ncr
device sym
options SYM_SETUP_LP_PROBE_MAP=0x40
device adv0 at isa?
device adw
device bt0 at isa?
device aha0 at isa?
device aic0 at isa?
device ncv
device nsp
device stg
device scbus
device da
device pass
device asr
device dpt
device iir
device mly
device ciss
device aac
device ida
device amr
device mlx
device twe
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x0
device vga0 at isa?
pseudo-device splash
device sc0 at isa? flags 0x100
device agp # support several AGP chipsets
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? disable flags 0x20 # Advanced Power
Management
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device em
pseudo-device loop
pseudo-device ether
pseudo-device ccd 2
pseudo-device pty
pseudo-device gif
pseudo-device faith 1
pseudo-device bpf
More information about the freebsd-hackers
mailing list