smartmontools vs HP Smart Array 642 controller

[Matthew D. Fuller]

On Thu, Feb 24, 2005 at 03:24:17PM -0600 I heard the voice of
Chris Dillon, and lo! it spake thus:
> 
> Your problem with smartmontools doesn't seem to be limited to the
> Smart Array 642, I just tried it on a DL380 G3 with the Smart Array
> 5i+ and got the same error you did.  It appears to be a
> driver-specific problem.

It's been failing on me on RELENG_5 since I updated from ~5.1 to
~5.3+, on an ahc controller:

(pass5:ahc1:0:5:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(pass5:ahc1:0:5:0): CAM Status: SCSI Status Error
(pass5:ahc1:0:5:0): SCSI Status: Check Condition
(pass5:ahc1:0:5:0): UNIT ATTENTION asc:29,3
(pass5:ahc1:0:5:0): Bus device reset function occurred
device Test Unit Ready  [Operation not permitted]

and the like.


-- 
Matthew Fuller     (MF4839)   |  fullermd at over-yonder.net
Systems/Network Administrator |  http://www.over-yonder.net/~fullermd/

"The only reason I'm burning my candle at both ends, is because I
      haven't figured out how to light the middle yet"