NetMos NM9805 1284 Printer port

[Willy Offermans]

Dear FreeBSD friends,

I have sent the following e-mail 3 times before. I believe always to
freebsd-hackers, but I'm not sure.

I'm running 5.3-RELEASE-p5 and downloaded the source yesterday. I
compiled the source and it works great, believe me. My boss is so
proud....

But I encounter a minor but annoying problem:

<<<this is begin of the old e-mail>>>>

I have an additional LPT port:

puc0 at pci3:13:0: class=0x078000 card=0x00101000 chip=0x98059710 rev=0x01 hdr=0x00
    vendor   = 'MosChip Semiconductors (Was: Netmos Technology)'
    device   = 'Nm9805 PCI + 1284 Printer Port'
    class    = simple comms

I was able to get it work by adding the following to /usr/src/sys/dev/puc/pucdata.c

         /* Added by Willy at Rompen.nl 06/05/2004 */
         /* recommended by john at feith.com       */

         /* NetMos 0S1P PCI : 0S, 1P */
         {   "NetMos NM9805 1284 Printer port",
                 {   0x9710, 0x9805, 0,      0       },
                 {   0xffff, 0xffff, 0,      0       },
                 {
                         { PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
                 },
         },

and to enable the puc driver in the kernel of course.

Is it possible to add the data to /usr/src/sys/dev/puc/pucdata.c permanently?

Thnx a lot,

<<<this is end of the old e-mail>>>>

This time I will sent it to three mailinglist at the same time, hoping
that someone picks it up. I was also looking for the maintainer of the
puc driver, but I couldn't figure out how to reach her or him.

-- 
Met vriendelijke groeten,
With kind regards,
Mit freundlichen Gruessen,
De jrus wah,

Willy

*************************************
W.K. Offermans
Eindhoven University of Technology
Department of Chemical Engineering
Laboratory of Catalysis (SKA)
building ST-W 4.27, PO Box 513
5600 MB  Eindhoven, Netherlands
Tel:    +31 40 247 37 81
Fax:    +31 40 245 50 54
Home:   +31 45 544 49 44
Mobile: +31 653 119 666
e-mail: w.k.offermans at tue.nl
http://www.catalysis.nl

                                       Powered by ....

                                            (__)
                                         \\\'',)
                                           \/  \ ^
                                           .\._/_)

                                       www.FreeBSD.org